OSPF problems
I have a fairly simply laid out network that could easily use static routing. However, I plan to expand quickly and don't wish to spend the better part of my life maintaining static routes.
INTERNET
|
---------
Gateway | - LAN 172.16.1.x
| - LINK 192.168.1.1
---------
|<----wifi
---------
router 2 | -LAN 172.16.2.x
| -Link 192.168.1.2
---------
|<----wifi
---------
router 3 | -LAN 172.16.3.x
| -Link 192.168.1.3
---------
OSPF seems to work however when connected to the LAN on either router 2 or 3 I get periodic time outs. It looks like the routers keep trying to elect a new chief and the little indians are getting extremely confused. Does anyone know what would be causing this and how I might avoid it. I tested it on a LAN with cross over cables where the wifi is and I get the same errors.
I am running RH 8.0, ZEBRA version 0.93A. I used the example found in the "Linux Advanced Routing & Traffic Control HOWTO" chapter 17. I have searched many many websites in search of help and now turn to you the experts to help a fellow geek.
Thanks,
==/* Jeff Nye */
/* 801-728-1755 */
__________________________________________________
Do you Yahoo!?
Yahoo! Platinum - Watch CBS' NCAA March Madness, live on your desktop!
http://platinum.yahoo.com
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 8 lines
Message: 3
Date: Wed, 26 Mar 2003 20:06:14 -0800 (PST)
From: Jeff Nye <[email protected]>
To: [email protected]
Subject: [LARTC] OSPF problemsI have a fairly simply laid out network that could easily use static
routing. However, I
Quoted 1 line
plan to expand quickly and don't wish to spend the better part of my life
maintaining
Quoted 16 lines
static routes.
INTERNET
|
---------
Gateway | - LAN 172.16.1.x| - LINK 192.168.1.1---------
|<----wifi
---------
router 2 | -LAN 172.16.2.x| -Link 192.168.1.2---------
|<----wifi
---------
router 3 | -LAN 172.16.3.x
Quoted 5 lines
| -Link 192.168.1.3---------
OSPF seems to work however when connected to the LAN on either router 2 or
3 I get
Quoted 1 line
periodic time outs. It looks like the routers keep trying to elect a new
chief and the
Quoted 1 line
little indians are getting extremely confused. Does anyone know what
would be causing
Quoted 1 line
this and how I might avoid it. I tested it on a LAN with cross over
cables where the
Quoted 3 lines
wifi is and I get the same errors.
I am running RH 8.0, ZEBRA version 0.93A. I used the example found in the
"Linux
Quoted 1 line
Advanced Routing & Traffic Control HOWTO" chapter 17. I have searched
many many websites
Quoted 1 line
in search of help and now turn to you the experts to help a fellow geek.
if you could show output from commands:
sh ip o n
sh ip o d
Regards,
bar
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/