Skip to contentSkip to conversation

OSPF problems

LARTC Jeff Nye 2 participants 2 messages Mar 27, 2003 – Mar 30, 2003

lore
Share & tools
lore

Jeff Nye

author
#0 lore raw

I have a fairly simply laid out network that could easily use static routing. However, I plan to expand quickly and don't wish to spend the better part of my life maintaining static routes.

INTERNET
|
---------
Gateway | - LAN 172.16.1.x

        | - LINK 192.168.1.1

---------
|<----wifi
---------
router 2 | -LAN 172.16.2.x

         | -Link 192.168.1.2

---------
|<----wifi
---------
router 3 | -LAN 172.16.3.x

         | -Link 192.168.1.3

---------

OSPF seems to work however when connected to the LAN on either router 2 or 3 I get periodic time outs. It looks like the routers keep trying to elect a new chief and the little indians are getting extremely confused. Does anyone know what would be causing this and how I might avoid it. I tested it on a LAN with cross over cables where the wifi is and I get the same errors.

I am running RH 8.0, ZEBRA version 0.93A. I used the example found in the "Linux Advanced Routing & Traffic Control HOWTO" chapter 17. I have searched many many websites in search of help and now turn to you the experts to help a fellow geek.

Thanks,

==/* Jeff Nye */
/* 801-728-1755 */

__________________________________________________
Do you Yahoo!?
Yahoo! Platinum - Watch CBS' NCAA March Madness, live on your desktop!
http://platinum.yahoo.com
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 8 lines

Message: 3
Date: Wed, 26 Mar 2003 20:06:14 -0800 (PST)
From: Jeff Nye <[email protected]>
To: [email protected]
Subject: [LARTC] OSPF problems

I have a fairly simply laid out network that could easily use static

routing. However, I

Quoted 1 line

plan to expand quickly and don't wish to spend the better part of my life

maintaining

Quoted 16 lines

static routes.

INTERNET
|
---------
Gateway | - LAN 172.16.1.x

        | - LINK 192.168.1.1

---------
|<----wifi
---------
router 2 | -LAN 172.16.2.x

         | -Link 192.168.1.2

---------
|<----wifi
---------
router 3 | -LAN 172.16.3.x

Quoted 5 lines
         | -Link 192.168.1.3

---------

OSPF seems to work however when connected to the LAN on either router 2 or

3 I get

Quoted 1 line

periodic time outs. It looks like the routers keep trying to elect a new

chief and the

Quoted 1 line

little indians are getting extremely confused. Does anyone know what

would be causing

Quoted 1 line

this and how I might avoid it. I tested it on a LAN with cross over

cables where the

Quoted 3 lines

wifi is and I get the same errors.

I am running RH 8.0, ZEBRA version 0.93A. I used the example found in the

"Linux

Quoted 1 line

Advanced Routing & Traffic Control HOWTO" chapter 17. I have searched

many many websites

Quoted 1 line

in search of help and now turn to you the experts to help a fellow geek.

if you could show output from commands:
sh ip o n
sh ip o d

Regards,
bar

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/