Skip to contentSkip to conversation

Limiting bandwidth pr. host

LARTC Matias Bjørling 3 participants 3 messages May 6, 2003 – May 7, 2003

lore
Share & tools
lore
#0 lore raw

Hey

I have tried over a few weeks to make a special configuration with TC.

I want every IP/Host on the network to have exactly 8kb/s from the internet. So every host max can use that specified bandwidth. Not more even if the internet line aint fully used.

I have tried to make the rules pr. ip, so i specified one rule in TC for every host on the network. But when i had loader around 100 rules into TC, the linux server crashed.

On FreeBSD it's very simple, a virtual netcard and then 2 command lines.

If someone have a good solution, i will be happy, and it would really help me in the daily work

I want to use it with TC with maybe CBQ, HTQ, WRR or other shapins modules. What's the easiest way?

Thank You

Best Regards
Matias Bjoerling

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw

Hi

For you Kind if Application, i would recomend to use WRR, it will do the total/numberof users

or you can looking www.apconnections.net
Mr Art have some application what you are looking for

best Places are

1. http://www.lartc.org
2. http://www.apconnections.net

hare
QoS Learner
----- Original Message -----
From: "Matias Bjørling" <[email protected]>
To: <[email protected]>
Sent: Wednesday, May 07, 2003 2:14 AM
Subject: [LARTC] Limiting bandwidth pr. host

Quoted 5 lines

Hey

I have tried over a few weeks to make a special configuration with TC.

I want every IP/Host on the network to have exactly 8kb/s from the

internet.

Quoted 7 lines

So every host max can use that specified bandwidth. Not more even if the internet line aint fully used.

I have tried to make the rules pr. ip, so i specified one rule in TC for every host on the network. But when i had loader around 100 rules into TC, the linux server crashed.

Quoted 6 lines

On FreeBSD it's very simple, a virtual netcard and then 2 command lines.

If someone have a good solution, i will be happy, and it would really help me in the daily work

I want to use it with TC with maybe CBQ, HTQ, WRR or other shapins

modules.

Quoted 11 lines

What's the easiest way?

Thank You

Best Regards
Matias Bjoerling

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#2 lore raw
In reply to Matias Bjørling
Quoted 11 lines · Matias Bjørling

Hey

I have tried over a few weeks to make a special configuration with TC.

I want every IP/Host on the network to have exactly 8kb/s from the internet. So every host max can use that specified bandwidth. Not more even if the internet line aint fully used.

I have tried to make the rules pr. ip, so i specified one rule in TC for every host on the network. But when i had loader around 100 rules into TC, the linux server crashed.

Strange. Did the server crashed when you added the 100'th class or when you had more then 100 active classes?
And was there any kernel error messages on the console ?

You also didn't told is you used cbq or htb.

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/