U32 port masks
Quoted 14 lines · Jurijs Dorofejevs
Hi!
Can anybody explain me how does the mask work in filters?
This example set filter for exactly port #2000 :
tc filter add dev eth1 parent 1:0 protocol ip prio 100 u32 match ip sport 20000xffffclassid 1:256But if I need to set filter for the range of ports, for example, ports from 2000 till 3000, what mask do I need?
Trying google, I've read that Mask =
0xffff- (high_port-low_port), that in my case will be: Mask =0xffff- (3000 - 2000) =0xfc17
Quoted 7 lines
tc filter add dev eth1 parent 1:0 protocol ip prio 100 u32 match ip sport 2000
0xfc17classid 1:256But this example doesn't work correctly and I suppose that I'm wrong with mask defying algorithm.
Any ideas?
I don't use the u32 mask myself, but I think you have to write it down in binary to understand.
Easy example :
match ip sport 2000 0xffff
2000 = 0000 0111 1101 0000 0xfff0 = 1111 1111 1111 0000
So all packets going from 0000 0111 1101 0000 (2000) to 0000 0111 1101 0000 (2031) are matched.
Other example :
match ip sport 2000 0xfc17
2000 = 0000 0111 1101 0000 0xfc17 = 1111 1100 0001 0111
This is more complicated. This matches all packets with 0000 01xx xxx1 x000 (x = 0 or 1) as source port.
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Hi!
Can anybody explain me how does the mask work in filters?
This example set filter for exactly port #2000 :
tc filter add dev eth1 parent 1:0 protocol ip prio 100 u32 match ip sport 2000 0xffff classid 1:256
But if I need to set filter for the range of ports, for example, ports from 2000 till 3000, what mask do I need?
Trying google, I've read that Mask = 0xffff - (high_port - low_port), that in my case will be: Mask = 0xffff - (3000 - 2000) = 0xfc17
tc filter add dev eth1 parent 1:0 protocol ip prio 100 u32 match ip sport 2000 0xfc17 classid 1:256
But this example doesn't work correctly and I suppose that I'm wrong with mask defying algorithm.
Any ideas?
Hope for your help!
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/