Skip to contentSkip to conversation

U32 port masks

LARTC Stef Coene 2 participants 2 messages May 27, 2003

lore
Share & tools
lore

Stef Coene

author
#0 lore raw
Quoted 14 lines · Jurijs Dorofejevs

Hi!

Can anybody explain me how does the mask work in filters?

This example set filter for exactly port #2000 :
tc filter add dev eth1 parent 1:0 protocol ip prio 100 u32 match ip sport 2000 0xffff classid 1:256

But if I need to set filter for the range of ports, for example, ports from 2000 till 3000, what mask do I need?

Trying google, I've read that Mask = 0xffff - (high_port - low_port), that in my case will be: Mask = 0xffff - (3000 - 2000) = 0xfc17

Quoted 7 lines

tc filter add dev eth1 parent 1:0 protocol ip prio 100 u32 match ip sport 2000 0xfc17 classid 1:256

But this example doesn't work correctly and I suppose that I'm wrong with mask defying algorithm.

Any ideas?

I don't use the u32 mask myself, but I think you have to write it down in binary to understand.

Easy example :
match ip sport 2000 0xffff

	2000   = 0000 0111 1101 0000
	0xfff0 = 1111 1111 1111 0000

So all packets going from 0000 0111 1101 0000 (2000) to 0000 0111 1101 0000 (2031) are matched.

Other example :
match ip sport 2000 0xfc17

	2000   = 0000 0111 1101 0000
	0xfc17 = 1111 1100 0001 0111

This is more complicated. This matches all packets with 0000 01xx xxx1 x000 (x = 0 or 1) as source port.

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#1 lore raw

Hi!

Can anybody explain me how does the mask work in filters?

This example set filter for exactly port #2000 :
tc filter add dev eth1 parent 1:0 protocol ip prio 100 u32 match ip sport 2000 0xffff classid 1:256

But if I need to set filter for the range of ports, for example, ports from 2000 till 3000, what mask do I need?

Trying google, I've read that Mask = 0xffff - (high_port - low_port), that in my case will be: Mask = 0xffff - (3000 - 2000) = 0xfc17

tc filter add dev eth1 parent 1:0 protocol ip prio 100 u32 match ip sport 2000 0xfc17 classid 1:256

But this example doesn't work correctly and I suppose that I'm wrong with mask defying algorithm.

Any ideas?
Hope for your help!

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/