time window in CBQ
Dear list,
I have two linux boxes acting as VoIP Gateway in the following configuration:
IP Phone ----------+ +------------------+
+------------------+ +---------------- IP Phone
|-----------eth0-| Linux BOX1
|-hdlc0----------hdlc0-| Linux BOX2 |-hdlc0-----------|
PC ----------------- -+ +------------------+
+-----------------+ +--------------- PCThe hdlc link is 64 kbps.
I tried to make a configuration in order to guarantee the bandidth of the VoIP calls versus the data traffic between the two PCs.
I used CBQ + Prio and U32 filter. The ip Phones mark the packet with TOS 0x40. I also need the entire bandidth available for data traffic when there are no calls.
I used the following configuration:
insmod /lib/modules/2.4.17_mvl21-sandpoint/kernel/net/sched/sch_cbq.o
insmod /lib/modules/2.4.17_mvl21-sandpoint/kernel/net/sched/sch_prio.o
insmod /lib/modules/2.4.17_mvl21-sandpoint/kernel/net/sched/cls_u32.o
tc qdisc del dev $int root
tc qdisc add dev $int root handle 1:0 cbq bandwidth $banda avpkt 1000 cell 8
tc class add dev $int parent 1:0 classid 1:1 cbq bandwidth $banda rate $banda maxburst 20 avpkt 500
tc class add dev $int parent 1:1 classid 1:2 cbq bandwidth $banda rate $banda_voce maxburst 20 avpkt 500
tc class add dev $int parent 1:1 classid 1:3 cbq bandwidth $banda rate $banda_dati maxburst 1 avpkt 500
tc qdisc add dev $int parent 1:2 handle 20: prio
tc qdisc add dev $int parent 1:3 handle 30: prio
tc filter add dev $int parent 1:0 protocol ip prio 1 u32 match ip tos 0x40 0xff flowid 1:2
tc filter add dev $int parent 1:0 protocol ip prio 1 u32 match ip tos 0x00 0xff flowid 1:3
According to the test I performed, the configuration works because the VoiP traffic has its bandwidth, however the voice quality is absolutely bad. This occurs because
the bandidth is given in "avarage" while I need a more "instant" bandidth. How can I reduce the time window used to calculate the rate of the VoIP class. Note (in the script) that I tried setting maxburst=1 for the best effort class but had no result,
thanks for help,
P.S. any other configuration suggested for my application will be very appreciated...
Luca Andreani
Quoted 58 lines · Andreani Luca
Dear list,
I have two linux boxes acting as VoIP Gateway in the following configuration:
IP Phone ----------+ +------------------++------------------+ +---------------- IP Phone
|-----------eth0-| Linux BOX1 | |-hdlc0----------hdlc0-| Linux BOX2 |-hdlc0-----------|PC ----------------- -+ +------------------++-----------------+ +--------------- PC
The hdlc link is 64 kbps.
I tried to make a configuration in order to guarantee the bandidth of the VoIP calls versus the data traffic between the two PCs.
I used CBQ + Prio and U32 filter. The ip Phones mark the packet with TOS0x40. I also need the entire bandidth available for data traffic when there are no calls.I used the following configuration:
insmod
/lib/modules/2.4.17_mvl21-sandpoint/kernel/net/sched/sch_cbq.oinsmod
/lib/modules/2.4.17_mvl21-sandpoint/kernel/net/sched/sch_prio.oinsmod
/lib/modules/2.4.17_mvl21-sandpoint/kernel/net/sched/cls_u32.otc qdisc del dev $int root
tc qdisc add dev $int root handle 1:0 cbq bandwidth $banda avpkt 1000 cell 8
tc class add dev $int parent 1:0 classid 1:1 cbq bandwidth $banda rate $banda maxburst 20 avpkt 500
tc class add dev $int parent 1:1 classid 1:2 cbq bandwidth $banda rate $banda_voce maxburst 20 avpkt 500
tc class add dev $int parent 1:1 classid 1:3 cbq bandwidth $banda rate $banda_dati maxburst 1 avpkt 500
tc qdisc add dev $int parent 1:2 handle 20: prio
tc qdisc add dev $int parent 1:3 handle 30: prio
tc filter add dev $int parent 1:0 protocol ip prio 1 u32 match ip tos
0x400xffflowid 1:2tc filter add dev $int parent 1:0 protocol ip prio 1 u32 match ip tos
0x000xffflowid 1:3
Quoted 7 lines
According to the test I performed, the configuration works because the VoiP traffic has its bandwidth, however the voice quality is absolutely bad. This occurs because
the bandidth is given in "avarage" while I need a more "instant" bandidth. How can I reduce the time window used to calculate the rate of the VoIP class. Note (in the script) that I tried setting maxburst=1 for the best effort class but had no result,
Check your bandwidth parameter :
http://www.docum.org/stef.coene/qos/faq/cache/5.html
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/