Skip to contentSkip to conversation

time window in CBQ

LARTC Andreani Luca 2 participants 2 messages Sep 5, 2003

lore
Share & tools
lore
#0 lore raw

Dear list,

I have two linux boxes acting as VoIP Gateway in the following configuration:

        IP Phone ----------+                 +------------------+
+------------------+                  +---------------- IP Phone
		         |-----------eth0-| Linux BOX1
|-hdlc0----------hdlc0-| Linux BOX2 |-hdlc0-----------|
        PC ----------------- -+                 +------------------+
+-----------------+                   +--------------- PC

The hdlc link is 64 kbps.

I tried to make a configuration in order to guarantee the bandidth of the VoIP calls versus the data traffic between the two PCs.
I used CBQ + Prio and U32 filter. The ip Phones mark the packet with TOS 0x40. I also need the entire bandidth available for data traffic when there are no calls.

I used the following configuration:

insmod /lib/modules/2.4.17_mvl21-sandpoint/kernel/net/sched/sch_cbq.o

insmod /lib/modules/2.4.17_mvl21-sandpoint/kernel/net/sched/sch_prio.o

insmod /lib/modules/2.4.17_mvl21-sandpoint/kernel/net/sched/cls_u32.o

tc qdisc del dev $int root

tc qdisc add dev $int root handle 1:0 cbq bandwidth $banda avpkt 1000 cell 8

tc class add dev $int parent 1:0 classid 1:1 cbq bandwidth $banda rate $banda maxburst 20 avpkt 500

tc class add dev $int parent 1:1 classid 1:2 cbq bandwidth $banda rate $banda_voce maxburst 20 avpkt 500

tc class add dev $int parent 1:1 classid 1:3 cbq bandwidth $banda rate $banda_dati maxburst 1 avpkt 500

tc qdisc add dev $int parent 1:2 handle 20: prio

tc qdisc add dev $int parent 1:3 handle 30: prio

tc filter add dev $int parent 1:0 protocol ip prio 1 u32 match ip tos 0x40 0xff flowid 1:2

tc filter add dev $int parent 1:0 protocol ip prio 1 u32 match ip tos 0x00 0xff flowid 1:3

According to the test I performed, the configuration works because the VoiP traffic has its bandwidth, however the voice quality is absolutely bad. This occurs because
the bandidth is given in "avarage" while I need a more "instant" bandidth. How can I reduce the time window used to calculate the rate of the VoIP class. Note (in the script) that I tried setting maxburst=1 for the best effort class but had no result,

thanks for help,

P.S. any other configuration suggested for my application will be very appreciated...

Luca Andreani

#1 lore raw
Quoted 58 lines · Andreani Luca

Dear list,

I have two linux boxes acting as VoIP Gateway in the following configuration:

        IP Phone ----------+                 +------------------+

+------------------+ +---------------- IP Phone

		         |-----------eth0-| Linux BOX1
|
|-hdlc0----------hdlc0-| Linux BOX2 |-hdlc0-----------|
        PC ----------------- -+                 +------------------+

+-----------------+ +--------------- PC

The hdlc link is 64 kbps.

I tried to make a configuration in order to guarantee the bandidth of the VoIP calls versus the data traffic between the two PCs.
I used CBQ + Prio and U32 filter. The ip Phones mark the packet with TOS 0x40. I also need the entire bandidth available for data traffic when there are no calls.

I used the following configuration:

insmod /lib/modules/2.4.17_mvl21-sandpoint/kernel/net/sched/sch_cbq.o

insmod /lib/modules/2.4.17_mvl21-sandpoint/kernel/net/sched/sch_prio.o

insmod /lib/modules/2.4.17_mvl21-sandpoint/kernel/net/sched/cls_u32.o

tc qdisc del dev $int root

tc qdisc add dev $int root handle 1:0 cbq bandwidth $banda avpkt 1000 cell 8

tc class add dev $int parent 1:0 classid 1:1 cbq bandwidth $banda rate $banda maxburst 20 avpkt 500

tc class add dev $int parent 1:1 classid 1:2 cbq bandwidth $banda rate $banda_voce maxburst 20 avpkt 500

tc class add dev $int parent 1:1 classid 1:3 cbq bandwidth $banda rate $banda_dati maxburst 1 avpkt 500

tc qdisc add dev $int parent 1:2 handle 20: prio

tc qdisc add dev $int parent 1:3 handle 30: prio

tc filter add dev $int parent 1:0 protocol ip prio 1 u32 match ip tos 0x40 0xff flowid 1:2

tc filter add dev $int parent 1:0 protocol ip prio 1 u32 match ip tos 0x00 0xff flowid 1:3

Quoted 7 lines

According to the test I performed, the configuration works because the VoiP traffic has its bandwidth, however the voice quality is absolutely bad. This occurs because
the bandidth is given in "avarage" while I need a more "instant" bandidth. How can I reduce the time window used to calculate the rate of the VoIP class. Note (in the script) that I tried setting maxburst=1 for the best effort class but had no result,

Check your bandwidth parameter :
http://www.docum.org/stef.coene/qos/faq/cache/5.html

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/