IMQ technical question
How many IMQ queueing devices you may have ? I've patched the 2.4.21 kernel and I have by default 2 devices: imq0 and imq1 !
regards,
Codrin.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 2 lines · The Codrinus
How many IMQ queueing devices you may have ? I've patched the 2.4.21 kernel and I have by default 2 devices: imq0 and imq1 !
From
http://trash.net/~kaber/imq/
modprobe imq numdevs=1
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 3 lines · On Thu, 11 Sep 2003 15:28:59 +0300 (EEST) The Codrinus…
How many IMQ queueing devices you may have ? I've patched the 2.4.21 kernel and I have by default 2 devices: imq0 and imq1 !
Hello,
use something like modprobe imq numdevs=8 to load imq kernel module or put "options imq numdevs=8" to the /etc/modules.conf file. The maximum is 16 (set in include/linux/imq.h with #define IMQ_MAX_DEVS 16).
Signature · 4 lines
Martin Volf _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Greetings,
I have a system with a monolithic kernel and I am using imq. But now I
need
to use more than the default 2 imq devices,
how can I increase the default to at least 4 with out recompiling a modular kernel.
Thomas
Quoted 18 lines
----- Original Message -----
From: "Martin Volf" <[email protected]>
To: "The Codrinus" <[email protected]>
Cc: <[email protected]>
Sent: Thursday, September 11, 2003 7:47 PM
Subject: Re: [LARTC] IMQ technical questionQuoted 10 lines
Quoted 3 lines · On Thu, 11 Sep 2003 15:28:59 +0300 (EEST) The Codrinus…
How many IMQ queueing devices you may have ? I've patched the 2.4.21 kernel and I have by default 2 devices: imq0 and imq1 !
Hello,
use something like modprobe imq numdevs=8 to load imq kernel module or
put
Quoted 10 lines
"options imq numdevs=8" to the
/etc/modules.conffile. The maximum is 16 (set ininclude/linux/imq.hwith #defineIMQ_MAX_DEVS16).Quoted 7 lines
Signature · 5 lines
-- Martin Volf _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 7 lines · On Tue, 16 Sep 2003 10:25:31 +0200 "Thomas Switala" <[email protected]> wrote:
Greetings,
I have a system with a monolithic kernel and I am using imq. But now I
need
to use more than the default 2 imq devices,
how can I increase the default to at least 4 with out recompiling a modular kernel.
Hello,
you can't I'm afraid, it seems that imq does not support kernel command line from lilo, grub or other bootloaders. But I'm not 100% sure about it.
Signature · 5 lines
Martin _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/