Skip to contentSkip to conversation

IMQ technical question

LARTC The Codrinus 4 participants 5 messages Sep 11, 2003 – Sep 16, 2003

lore
Share & tools
lore
#1 lore raw
Quoted 2 lines · The Codrinus

How many IMQ queueing devices you may have ? I've patched the 2.4.21 kernel and I have by default 2 devices: imq0 and imq1 !

From
http://trash.net/~kaber/imq/

modprobe imq numdevs=1

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#2 lore raw
In reply to The Codrinus
Quoted 3 lines · On Thu, 11 Sep 2003 15:28:59 +0300 (EEST) The Codrinus…

How many IMQ queueing devices you may have ? I've patched the 2.4.21 kernel and I have by default 2 devices: imq0 and imq1 !

Hello,

use something like modprobe imq numdevs=8 to load imq kernel module or put "options imq numdevs=8" to the /etc/modules.conf file. The maximum is 16 (set in include/linux/imq.h with #define IMQ_MAX_DEVS 16).

Signature · 4 lines
Martin Volf
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#3 lore raw
In reply to The Codrinus

Greetings,

I have a system with a monolithic kernel and I am using imq. But now I
need
to use more than the default 2 imq devices,
how can I increase the default to at least 4 with out recompiling a modular kernel.

Thomas

Quoted 18 lines

----- Original Message -----
From: "Martin Volf" <[email protected]>
To: "The Codrinus" <[email protected]>
Cc: <[email protected]>
Sent: Thursday, September 11, 2003 7:47 PM
Subject: Re: [LARTC] IMQ technical question

Quoted 10 lines
Quoted 3 lines · On Thu, 11 Sep 2003 15:28:59 +0300 (EEST) The Codrinus…

How many IMQ queueing devices you may have ? I've patched the 2.4.21 kernel and I have by default 2 devices: imq0 and imq1 !

Hello,

use something like modprobe imq numdevs=8 to load imq kernel module or

put

Quoted 10 lines

"options imq numdevs=8" to the /etc/modules.conf file. The maximum is 16 (set in include/linux/imq.h with #define IMQ_MAX_DEVS 16).

Quoted 7 lines
Signature · 5 lines
-- 
Martin Volf
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#4 lore raw
In reply to The Codrinus
Quoted 7 lines · On Tue, 16 Sep 2003 10:25:31 +0200 "Thomas Switala" <[email protected]> wrote:

Greetings,

I have a system with a monolithic kernel and I am using imq. But now I
need
to use more than the default 2 imq devices,
how can I increase the default to at least 4 with out recompiling a modular kernel.

Hello,

you can't I'm afraid, it seems that imq does not support kernel command line from lilo, grub or other bootloaders. But I'm not 100% sure about it.

Signature · 5 lines
Martin

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/