Skip to contentSkip to conversation

New Kernel 2.4.21 - missing IMQ Netfilter target

LARTC David Fisher 2 participants 3 messages Sep 13, 2003 – Sep 15, 2003

lore
Share & tools
lore
#0 lore raw

I apologise if this is a FAQ, but:

I have just compiled a new kernel for my router machine using 2.4.21 and the linux-2.4.21-imq-1.diff patch.

On running make xconfig the following seems to be missing:

Networking options ---> IP: Netfilter Configuration --->IMQ target support

although the device is present under network device support.

What am I missing here?

Signature · 8 lines
David

Quidquid latine dictum sit, altum sonatur.


_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#1 lore raw
Quoted 5 lines · Michal Jursa

This (IMQ target) option is in the submenu under 'Packet mangle' option...so you have to enable packet mangling first...

Mike

No, I have packet mangling enabled but it's definitely not there. Might there be some other prerequisite I've missed?

Signature · 8 lines
David

Quidquid latine dictum sit, altum sonatur.


_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#2 lore raw
In reply to David Fisher
Quoted 8 lines · David Fisher
Quoted 4 lines · Michal Jursa

This (IMQ target) option is in the submenu under 'Packet mangle' option...so you have to enable packet mangling first...

Mike

No, I have packet mangling enabled but it's definitely not there. Might there be some other prerequisite I've missed?

A total guess - but you may need CONFIG_EXPERIMENTAL.

Andy.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/