New Kernel 2.4.21 - missing IMQ Netfilter target
I apologise if this is a FAQ, but:
I have just compiled a new kernel for my router machine using 2.4.21 and the linux-2.4.21-imq-1.diff patch.
On running make xconfig the following seems to be missing:
Networking options ---> IP: Netfilter Configuration --->IMQ target support
although the device is present under network device support.
What am I missing here?
Signature · 8 lines
David Quidquid latine dictum sit, altum sonatur. _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 5 lines · Michal Jursa
This (IMQ target) option is in the submenu under 'Packet mangle' option...so you have to enable packet mangling first...
Mike
No, I have packet mangling enabled but it's definitely not there. Might there be some other prerequisite I've missed?
Signature · 8 lines
David Quidquid latine dictum sit, altum sonatur. _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 8 lines · David Fisher
Quoted 4 lines · Michal Jursa
This (IMQ target) option is in the submenu under 'Packet mangle' option...so you have to enable packet mangling first...
Mike
No, I have packet mangling enabled but it's definitely not there. Might there be some other prerequisite I've missed?
A total guess - but you may need CONFIG_EXPERIMENTAL.
Andy.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/