QOS problems switching from CBQ to HTB.
Hello all! So as not to inundate the entire list with a huge email, I have put together a web page that
explains my situation and problem in detail. Here is a quick summary:
Internet
|
|
|
CCAonline Router (Cisco)
|
|
|
(eth0)
Master CCAonline AP
HTB Bandwidth control
(wlan0)
|
|
|
========= / / / /|\ \ \ \
/ / / / | \ \ \ \
/ / / / | \ \ \ \
(Lots of Wireless Clients) | \
/ \
/ \
AP1 AP2
/ \
/ \
==== === / /|\ \ / /|\ \
/ / | \ \ / / | \ \
Other Wireless Other Wireless
Clients ClientsUp until a few weeks ago, we had been using kernel version 2.4.18 and CBQ.init to control bandwidth. I set that up quite a long time ago, and only vaguely understood bandwidth control when I did, but it seemed to work well enough. A few weeks ago, the hard drive began to fail in our master AP. I had been working on designing its replacement anyway, so I was able to make it limp along until I got 'Son of Master AP' up and running. The problem we have now is that QOS is pretty crappy. I've read the LARTC HOWTO, and pretty much the entire docum.org site. I feel like I have a relatively good handle on the subject matter, but I'm not able to achieve good QOS. I'm mainly looking for advice and input on how best to fairly share the available bandwidth among the subscribers to our service. Ultimately we will want a higher priority level for business clients, but that can wait until the basics are under control. All details are available from
http://wireless.ccaonline.com/lartcThanks, everyone! This is a great list!Curtis V. Schleich,CCA and CCAonline,cvslist (at) ccaonline (dot) com
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Not sure how the end of that email got mangled, but here's the corrected URL. Sorry for the problem!
http://wireless.ccaonline.com/lartc
Thanks, everyone! This is a great list!
Curtis V. Schleich,
CCA and CCAonline,
cvslist (at) ccaonline (dot) com
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 24 lines · Curtis V. Schleich
Hello all! So as not to inundate the entire list with a huge email, I have put together a web page that
explains my situation and problem in detail. Here is a quick summary:Internet CCAonline Router (Cisco) (eth0) Master CCAonline AP HTB Bandwidth control (wlan0) =========> / / / /|\ \ \ \ / / / / | \ \ \ \ / / / / | \ \ \ \ (Lots of Wireless Clients) | \ / \
Quoted 8 lines
/ \
AP1 AP2
/ \
/ \
==== ===> / /|\ \ / /|\ \
/ / | \ \ / / | \ \
Other Wireless Other Wireless
Clients ClientsCan you try to add "quantum 1500" or maybe 4000 to each class?
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.openprojects.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Trying 4000 right now, I'll try 1500 after I have a chance to see if 4000 makes any difference. I have put new commands and stats (which I will update periodically over the next few hours) at the
http://wireless.ccaonline.com/lartc/ site. On initial examination it does not seem to be making any significant difference. I've still got very laggy ping times, which I did not have when we were using CBQ. During the HTB research, I did discover that my CBQ setup was probably weird. I had a class for each user directly off the root, and the total rates FAR exceeded the available bandwidth. So from what I read it was probably pretty whacked, but I always seemed to have stable pings under 10ms. These are all over the map (or graph as the case may be).
Anything else??
Thanks!!
CVS
----- Original Message -----
From: "Stef Coene" <[email protected]>
To: "Curtis V. Schleich" <[email protected]>; <[email protected]>
Sent: Monday, September 15, 2003 3:18 PM
Subject: Re: [LARTC] QOS problems switching from CBQ to HTB.
Quoted 2 lines · Curtis V. Schleich
Quoted 1 line
Hello all! So as not to inundate the entire list with a huge email, I
have
Quoted 31 lines
Quoted 23 lines
put together a web page that
explains my situation and problem in detail. Here is a quick summary:Internet CCAonline Router (Cisco) (eth0) Master CCAonline AP HTB Bandwidth control (wlan0) =========> > / / / /|\ \ \ \ / / / / | \ \ \ \ / / / / | \ \ \ \ (Lots of Wireless Clients) | \ / \Quoted 8 lines
/ \ AP1 AP2 / \ / \ ==== ===> > / /|\ \ / /|\ \ / / | \ \ / / | \ \ Other Wireless Other Wireless Clients Clients
Quoted 10 lines
Can you try to add "quantum 1500" or maybe 4000 to each class?
Stef
Signature · 4 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.openprojects.net
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 6 lines · Curtis V. Schleich
Trying 4000 right now, I'll try 1500 after I have a chance to see if 4000 makes any difference. I have put new commands and stats (which I will update periodically over the next few hours) at the
http://wireless.ccaonline.com/lartc/ site. On initial examination it does not seem to be making any significant difference. I've still got very laggy ping times, which I did not have when we were using CBQ.
just a red herring for you, ;-), but you may need to use some arbitrated channel access mechanism for this many users off one AP, viz WiCCP, otherwise channel contention will become an issue. This will likely cause high ping times.
/steve
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Agreed, but just a few weeks ago, using CBQ, things were calm and stable. I can check to see if our overall data transfer is up from a month ago. Thanks for the fish!
CVS
----- Original Message -----
From: "Steve Wright" <[email protected]>
To: "Curtis V. Schleich" <[email protected]>
Cc: "Stef Coene" <[email protected]>; <[email protected]>
Sent: Monday, September 15, 2003 4:49 PM
Subject: Re: [LARTC] QOS problems switching from CBQ to HTB.
Quoted 2 lines · Curtis V. Schleich
Quoted 1 line
Trying 4000 right now, I'll try 1500 after I have a chance to see if
4000
Quoted 3 lines
Quoted 3 lines
makes any difference. I have put new commands and stats (which I will update periodically over the next few hours) at the
http://wireless.ccaonline.com/lartc/ site. On initial examination it
does
Quoted 1 line
Quoted 1 line
not seem to be making any significant difference. I've still got very
laggy
Quoted 9 lines
Quoted 1 line
ping times, which I did not have when we were using CBQ.
just a red herring for you, ;-), but you may need to use some arbitrated channel access mechanism for this many users off one AP, viz WiCCP, otherwise channel contention will become an issue. This will likely cause high ping times.
Quoted 6 lines
/steve
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 11 lines · Curtis V. Schleich
Trying 4000 right now, I'll try 1500 after I have a chance to see if 4000 makes any difference. I have put new commands and stats (which I will update periodically over the next few hours) at the
http://wireless.ccaonline.com/lartc/ site. On initial examination it does not seem to be making any significant difference. I've still got very laggy ping times, which I did not have when we were using CBQ. During the HTB research, I did discover that my CBQ setup was probably weird. I had a class for each user directly off the root, and the total rates FAR exceeded the available bandwidth. So from what I read it was probably pretty whacked, but I always seemed to have stable pings under 10ms. These are all over the map (or graph as the case may be).
Can put your cbq setup on your web-server? So we can compare....
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.openprojects.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/