Problem with tc filter (tc qdisc/class works ok)
Hello,
I'm having problem adding filters using tc. I get the response back RTNETLINK answers-invalis argument.
Though the tc qdisc and tc class commands work fine. In my kernel config, QoS related parameters are enabled (CONFIG_NET_SCHED, CONFIG_NET_QOS, CONFIG_NET_CLS, CONFIG_NET_CLS_U32, CONFIG_NET_SCH_HTB). Also CONFIG_NETLINK, CONFIG_RTNETLINK and CONFIG_NETLINK_DEV are set to 'y'
__________________________________
Do you Yahoo!?
The New Yahoo! Shopping - with improved product search
http://shopping.yahoo.com
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 11 lines · Praveen Mehrotra
Hello,
I'm having problem adding filters using tc. I get the response back RTNETLINK answers-invalis argument.
Though the tc qdisc and tc class commands work fine. In my kernel config, QoS related parameters are enabled (
CONFIG_NET_SCHED,CONFIG_NET_QOS,CONFIG_NET_CLS,CONFIG_NET_CLS_U32,CONFIG_NET_SCH_HTB). AlsoCONFIG_NETLINK,CONFIG_RTNETLINKandCONFIG_NETLINK_DEVare set to 'y'
Can you post your tc commands?
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.openprojects.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 15 lines · --- Stef Coene
Quoted 3 lines · Praveen Mehrotra
Hello,
I'm having problem adding filters using tc. I get
the
Quoted 3 lines
response back RTNETLINK answers-invalis argument.
Though the tc qdisc and tc class commands work
fine.
Quoted 5 lines
In my kernel config, QoS related parameters are enabled (
CONFIG_NET_SCHED,CONFIG_NET_QOS,CONFIG_NET_CLS,CONFIG_NET_CLS_U32,CONFIG_NET_SCH_HTB). AlsoCONFIG_NETLINK,CONFIG_RTNETLINKandCONFIG_NETLINK_DEVare set to
Quoted 4 lines
'y'
Can you post your tc commands?Stef
Hi Stef,
I'm using following commands (i'm trying to use it with IMQ). I'm trying the example given in IMQ section of adv-routing-howto doc.
# tc qdisc add dev imq0 root handle 1: htb default 11
# tc class add dev imq0 parent 1: classid 1:1 htb \ rate 4mbit burst 10k
# tc class add dev imq0 parent 1:1 classid 1:10 \ htb rate 2mbit
# tc class add dev imq0 parent 1:1 classid 1:11 \ htb rate 2mbit
# tc qdisc add dev imq0 parent 1:10 handle 10 pfifo #tc qdisc add dev imq0 parent 1:11 handle 11: pfifo
# tc filter add dev imq0 parent 10:0 protocol ip \ prio 1 u32 match u32 00100000 00ff0000 at 0 \ flowid 1:10
All commands except the last one work fine.
Thanks for your help,
Praveen
__________________________________
Do you Yahoo!?
The New Yahoo! Shopping - with improved product search
http://shopping.yahoo.com
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 5 lines · Praveen Mehrotra
# tc filter add dev imq0 parent 10:0 protocol ip \ prio 1 u32 match u32 00100000 00ff0000 at 0 \ flowid 1:10All commands except the last one work fine.
soyou have an error in your filter statement. I have the same error if I execute it on my box. I'm not familiar with the u32 syntax, but check out the docs for examples.
I think you copied this filter command from the lartc howto, but it's not working for me either.
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.openprojects.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Hi
Quoted 5 lines
# tc filter add dev imq0 parent 10:0 protocol ip \ prio 1 u32 match u32 00100000 00ff0000 at 0 \ flowid 1:10All commands except the last one work fine.
I assume you're trying to match the tos field. u32 uses strtol to read numeric values. Values prefixed with a 0 are assumed to be octal you have to write 0x0011... and 0x00ff.... in order to have it interpreted in hex.
Try this:
tc filter add dev imq parent 10:0 protocol ip \
prio 1 u32 match ip tos 0x10 0xff flowid 1:10
Regards
Signature · 4 lines
Thomas GRAF <[email protected]> _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/