Skip to contentSkip to conversation

Problem with tc filter (tc qdisc/class works ok)

LARTC Praveen Mehrotra 3 participants 5 messages Oct 9, 2003 – Oct 11, 2003

lore
Share & tools
lore
#0 lore raw

Hello,

I'm having problem adding filters using tc. I get the response back RTNETLINK answers-invalis argument.

Though the tc qdisc and tc class commands work fine. In my kernel config, QoS related parameters are enabled (CONFIG_NET_SCHED, CONFIG_NET_QOS, CONFIG_NET_CLS, CONFIG_NET_CLS_U32, CONFIG_NET_SCH_HTB). Also CONFIG_NETLINK, CONFIG_RTNETLINK and CONFIG_NETLINK_DEV are set to 'y'

__________________________________
Do you Yahoo!?
The New Yahoo! Shopping - with improved product search
http://shopping.yahoo.com
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 11 lines · Praveen Mehrotra

Hello,

I'm having problem adding filters using tc. I get the response back RTNETLINK answers-invalis argument.

Though the tc qdisc and tc class commands work fine. In my kernel config, QoS related parameters are enabled (CONFIG_NET_SCHED, CONFIG_NET_QOS, CONFIG_NET_CLS, CONFIG_NET_CLS_U32, CONFIG_NET_SCH_HTB). Also CONFIG_NETLINK, CONFIG_RTNETLINK and CONFIG_NETLINK_DEV are set to 'y'

Can you post your tc commands?

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.openprojects.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#2 lore raw
In reply to Praveen Mehrotra
Quoted 15 lines · --- Stef Coene
Quoted 3 lines · Praveen Mehrotra

Hello,

I'm having problem adding filters using tc. I get

the

Quoted 3 lines

response back RTNETLINK answers-invalis argument.

Though the tc qdisc and tc class commands work

fine.

Quoted 5 lines

In my kernel config, QoS related parameters are enabled (CONFIG_NET_SCHED, CONFIG_NET_QOS, CONFIG_NET_CLS, CONFIG_NET_CLS_U32, CONFIG_NET_SCH_HTB). Also CONFIG_NETLINK, CONFIG_RTNETLINK and CONFIG_NETLINK_DEV are set to

Quoted 4 lines

'y'
Can you post your tc commands?

Stef

Hi Stef,

I'm using following commands (i'm trying to use it with IMQ). I'm trying the example given in IMQ section of adv-routing-howto doc.

# tc qdisc add dev imq0 root handle 1: htb default 11
# tc class add dev imq0 parent 1: classid 1:1 htb \
rate 4mbit burst 10k 
# tc class add dev imq0 parent 1:1 classid 1:10 \
htb rate 2mbit
# tc class add dev imq0 parent 1:1 classid 1:11 \
htb rate 2mbit 
# tc qdisc add dev imq0 parent 1:10 handle 10 pfifo
#tc qdisc add dev imq0 parent 1:11 handle 11: pfifo
# tc filter add dev imq0 parent 10:0 protocol ip \
prio 1 u32 match u32 00100000 00ff0000 at 0 \
flowid 1:10

All commands except the last one work fine.

Thanks for your help,
Praveen

__________________________________
Do you Yahoo!?
The New Yahoo! Shopping - with improved product search
http://shopping.yahoo.com
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#3 lore raw
In reply to Praveen Mehrotra
Quoted 5 lines · Praveen Mehrotra
# tc filter add dev imq0 parent 10:0 protocol ip \
prio 1 u32 match u32 00100000 00ff0000 at 0 \
flowid 1:10

All commands except the last one work fine.

soyou have an error in your filter statement. I have the same error if I execute it on my box. I'm not familiar with the u32 syntax, but check out the docs for examples.
I think you copied this filter command from the lartc howto, but it's not working for me either.

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.openprojects.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#4 lore raw
In reply to Praveen Mehrotra

Hi

Quoted 5 lines
# tc filter add dev imq0 parent 10:0 protocol ip \
prio 1 u32 match u32 00100000 00ff0000 at 0 \
flowid 1:10

All commands except the last one work fine.

I assume you're trying to match the tos field. u32 uses strtol to read numeric values. Values prefixed with a 0 are assumed to be octal you have to write 0x0011... and 0x00ff.... in order to have it interpreted in hex.

Try this:

tc filter add dev imq parent 10:0 protocol ip \
prio 1 u32 match ip tos 0x10 0xff flowid 1:10

Regards

Signature · 4 lines
Thomas GRAF <[email protected]>
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/