tcng version 9h
... is on SourceForge:
http://tcng.sourceforge.net/dist/tcng-9h.tar.gz
md5sum 9b7c520f92b312a5a00da12bad35f57d
See also http://tcng.sourceforge.net/
This release upgrades to the current 2.4 kernels, fixes a few minor glitches in the build system, and adds the options --no-manual and --with-manual to configure, so that tcng can be build without the documentation (also, configure uses --no-manual if it can't find latex or dvips).
The complete list of changes is below.
- Werner
----------------------------------- CHANGES -----------------------------------
Version 9h (7-NOV-2003)
-----------------------
- tcc/ext/Makefile: dependencies now only include .c files compiled in that directory, removing a warning when building RPMs
- split tcsim/Makefile into Makefile.unclean and Makefile.clean to avoid rebuilding klib and ulib when cleaning up after configuration changes
- configure is compatible with 2.4.22 and 2.4.23 (pre-release, tested with 2.4.23-pre9)
- setup.klib generates linux/smp.h needed for 2.4.22
- tcsim/trace.c and tcsim/modules/sch_discard.c adjust ..._drop prototype for interface change in 2.4.22
- setup.klib clears LANG before using sed on [^ -~]
- setup.klib adds "err" and "error_report" members to "struct sock" in af_netlink.c (for 2.4.23)
- updated kernel version example in tcng/README from 2.4.21 to 2.4.22
- configure: added options --no-manual and --with-manual (abbreviations -m and -M) to allow building tcng with or without the documentation (suggested by "raptor")
- configure: automatically assumes --no-manual if either latex or dvips is not in the PATH
Signature · 6 lines
_________________________________________________________________________ / Werner Almesberger, Buenos Aires, Argentina [email protected] / /_http://www.almesberger.net/____________________________________________/ _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Hi,
I tried compiled tcng withj HTB support using a vanilla 2.4.22 Linux Kernel. I downloaded iproute2 and the HTB patch from the locations suggested in the README file that comes with tcng.
After compilation, some tests fail doing a 'make test'.
For the first test, I used gcc 2.95.4 and gcc-3.0 (debian woody), and a test fails:
http://www.geocities.com/arhuaco/post/tcng-9hlog-debian-woody.txt
For the second one, I used gcc 3.3.2 (Debian - Knoppix 3.3), and it failed in a different way.
http://www.geocities.com/arhuaco/post/tcng-9hlog-knoppix-3.3.txt
The Knoppix kernel is not a vanilla kernel, but by reading tests/README I think it doesn't matter for the tests.
Well, I'd like to know if I'm doing something wrong.
Regards,
Nelson.-
Quoted 6 lines
Quoting Werner Almesberger (Fri, 7 Nov 2003 00:20:47 -0300 :
(snip ... )
.. is on SourceForge:
http://tcng.sourceforge.net/dist/tcng-9h.tar.gz
md5sum9b7c520f92b312a5a00da12bad35f57d
(snip ... )
Signature · 8 lines
http://geocities.com/arhuaco
The first principle is that you must not fool yourself
and you are the easiest person to fool.
-- Richard Feynman.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/