Forward + Routing
Hi everybody,
My situation is just like below:
Subnet A <-> GATEWAY A ------- VPN with FREE/SWAN --------- GATEWAY B <-> Subnet B
now I have a Subnet C reachable from Subnet B through a gateway on the same Subnet B.
Subnet A <-> GATEWAY A ------- VPN with FREE/SWAN --------- GATEWAY B <-> Subnet B <-> GATEWAY B1 (physically on Subnet B) <-> Subnet C
The question is: HOW DO I MAKE SUBNET C REACHABLE FROM SUBNET A?
This is what I tried:
I created a new connection in ipse.conf specifying as leftsubnet just the Subnet C. This way I can ping Subnet C from GATEWAY B but not from Subnet A.. It seems to me that packets are not routed correctly if they came from Subnet A! I already added a route to Subnet C on the GATEWAY B but it seems to work only for packets from the Gateway and not for the forwarded packets from Subnet A..
Just need help..
Thanks.
Fiorangelo
_________________________________________________________________
Nuovo MSN Messenger 6.1 con sfondi e giochi! http://messenger.msn.it/
Provalo subito!
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Hi Fiorangelo,
Quoted 10 lines
Subnet A <-> GATEWAY A ------- VPN with FREE/SWAN --------- GATEWAY B <-> Subnet B <-> GATEWAY B1 (physically on Subnet B) <-> Subnet C The question is: HOW DO I MAKE SUBNET C REACHABLE FROM SUBNET A?
I created a new connection in ipse.conf specifying as leftsubnet just the Subnet C. This way I can ping Subnet C from GATEWAY B but not from Subnet A.. It seems to me that packets are not routed correctly if they came from Subnet A! I already added a route to Subnet C on the GATEWAY B but it seems to work only for packets from the Gateway and not for the forwarded packets from Subnet A..
You'll need a new ipsec.conf connection at GATEWAY A and GATEWAY B for Subnet A <-> Subnet C, (which I think you did)
Then you need a route ON GATEWAY B TO Subnet C via GATEWAY B1 (which I think you did), ** AND the opposite route back ON GATEWAY B1 TO Subnet A via GATEWAY B **
If that doesn't work, you may need to ask the FreeS/WAN guys since it might be an erouting problem on GATEWAY B.
That is assuming there is no NAT or Masquerading occuring anywhere.
Regards,
Signature · 11 lines
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Damion de Soto - Software Engineer email: [email protected] SnapGear - A CyberGuard Company --- ph: +61 7 3435 2809 | Custom Embedded Solutions fax: +61 7 3891 3630 | and Security Appliances web: http://www.snapgear.com ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ --- Free Embedded Linux Distro at http://www.snapgear.org --- _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Hi,
Quoted 1 line
** AND the opposite route back ON GATEWAY B1 TO Subnet A via GATEWAY B **
I already added this route! GATEWAY B1 can send packets to Subnet A correctly... Seems just that packets outgoing from ipsec interface are not routed anymore towards Subnet C via Gateway B1...
Quoted 2 lines
If that doesn't work, you may need to ask the FreeS/WAN guys since it might be an erouting problem on GATEWAY B.
How?
Thanks
Quoted 32 lines
From: Damion de Soto <[email protected]>
To: Fiorangelo Peluso <[email protected]>
CC: [email protected]
Subject: Re: [LARTC] Forward + Routing
Date: Fri, 28 Nov 2003 13:45:34 +1000Hi Fiorangelo,
Quoted 10 lines
Subnet A <-> GATEWAY A ------- VPN with FREE/SWAN --------- GATEWAY B <-> Subnet B <-> GATEWAY B1 (physically on Subnet B) <-> Subnet C The question is: HOW DO I MAKE SUBNET C REACHABLE FROM SUBNET A?
I created a new connection in ipse.conf specifying as leftsubnet just the Subnet C. This way I can ping Subnet C from GATEWAY B but not from Subnet A.. It seems to me that packets are not routed correctly if they came from Subnet A! I already added a route to Subnet C on the GATEWAY B but it seems to work only for packets from the Gateway and not for the forwarded packets from Subnet A..
You'll need a new ipsec.conf connection at GATEWAY A and GATEWAY B for Subnet A <-> Subnet C, (which I think you did)
Then you need a route ON GATEWAY B TO Subnet C via GATEWAY B1 (which I think you did),
** AND the opposite route back ON GATEWAY B1 TO Subnet A via GATEWAY B **If that doesn't work, you may need to ask the FreeS/WAN guys since it might be an erouting problem on GATEWAY B.
That is assuming there is no NAT or Masquerading occuring anywhere.
Regards,
Quoted 9 lines
--
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Damion de Soto - Software Engineer email: [email protected]
SnapGear - A CyberGuard Company --- ph: +61 7 3435 2809| Custom Embedded Solutions fax: +61 7 3891 3630 | and Security Appliances web: http://www.snapgear.com~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
--- Free Embedded Linux Distro at http://www.snapgear.org ---
_________________________________________________________________
MSN Extra Storage: piena libertà di esprimersi e comunicare
http://www.msn.it/msnservizi/es/?xAPIDS4&DI44&SU=http://hotmail.it/&HL=HMTAGTX_MSN_Extra_Storage
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/