Skip to contentSkip to conversation

Forward + Routing

LARTC Fiorangelo Peluso 2 participants 3 messages Nov 27, 2003 – Nov 28, 2003

lore
Share & tools
lore
#0 lore raw

Hi everybody,

My situation is just like below:

Subnet A <-> GATEWAY A ------- VPN with FREE/SWAN --------- GATEWAY B <-> Subnet B

now I have a Subnet C reachable from Subnet B through a gateway on the same Subnet B.

Subnet A <-> GATEWAY A ------- VPN with FREE/SWAN --------- GATEWAY B <-> Subnet B <-> GATEWAY B1 (physically on Subnet B) <-> Subnet C

The question is: HOW DO I MAKE SUBNET C REACHABLE FROM SUBNET A?

This is what I tried:

I created a new connection in ipse.conf specifying as leftsubnet just the Subnet C. This way I can ping Subnet C from GATEWAY B but not from Subnet A.. It seems to me that packets are not routed correctly if they came from Subnet A! I already added a route to Subnet C on the GATEWAY B but it seems to work only for packets from the Gateway and not for the forwarded packets from Subnet A..

Just need help..

Thanks.

Fiorangelo

_________________________________________________________________
Nuovo MSN Messenger 6.1 con sfondi e giochi! http://messenger.msn.it/
Provalo subito!

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw

Hi Fiorangelo,

Quoted 10 lines

Subnet A <-> GATEWAY A ------- VPN with FREE/SWAN --------- GATEWAY B <-> Subnet B <-> GATEWAY B1 (physically on Subnet B) <-> Subnet C The question is: HOW DO I MAKE SUBNET C REACHABLE FROM SUBNET A?

I created a new connection in ipse.conf specifying as leftsubnet just the Subnet C. This way I can ping Subnet C from GATEWAY B but not from Subnet A.. It seems to me that packets are not routed correctly if they came from Subnet A! I already added a route to Subnet C on the GATEWAY B but it seems to work only for packets from the Gateway and not for the forwarded packets from Subnet A..

You'll need a new ipsec.conf connection at GATEWAY A and GATEWAY B for Subnet A <-> Subnet C, (which I think you did)

Then you need a route ON GATEWAY B TO Subnet C via GATEWAY B1 (which I think you did), ** AND the opposite route back ON GATEWAY B1 TO Subnet A via GATEWAY B **

If that doesn't work, you may need to ask the FreeS/WAN guys since it might be an erouting problem on GATEWAY B.

That is assuming there is no NAT or Masquerading occuring anywhere.

Regards,

Signature · 11 lines
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Damion de Soto - Software Engineer  email:     [email protected]
SnapGear - A CyberGuard Company ---    ph:         +61 7 3435 2809
  | Custom Embedded Solutions          fax:         +61 7 3891 3630
  | and Security Appliances            web: http://www.snapgear.com
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  ---  Free Embedded Linux Distro at   http://www.snapgear.org  ---

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#2 lore raw
In reply to Fiorangelo Peluso

Hi,

Quoted 1 line

** AND the opposite route back ON GATEWAY B1 TO Subnet A via GATEWAY B **

I already added this route! GATEWAY B1 can send packets to Subnet A correctly... Seems just that packets outgoing from ipsec interface are not routed anymore towards Subnet C via Gateway B1...

Quoted 2 lines

If that doesn't work, you may need to ask the FreeS/WAN guys since it might be an erouting problem on GATEWAY B.

How?

Thanks

Quoted 32 lines

From: Damion de Soto <[email protected]>
To: Fiorangelo Peluso <[email protected]>
CC: [email protected]
Subject: Re: [LARTC] Forward + Routing
Date: Fri, 28 Nov 2003 13:45:34 +1000

Hi Fiorangelo,

Quoted 10 lines

Subnet A <-> GATEWAY A ------- VPN with FREE/SWAN --------- GATEWAY B <-> Subnet B <-> GATEWAY B1 (physically on Subnet B) <-> Subnet C The question is: HOW DO I MAKE SUBNET C REACHABLE FROM SUBNET A?

I created a new connection in ipse.conf specifying as leftsubnet just the Subnet C. This way I can ping Subnet C from GATEWAY B but not from Subnet A.. It seems to me that packets are not routed correctly if they came from Subnet A! I already added a route to Subnet C on the GATEWAY B but it seems to work only for packets from the Gateway and not for the forwarded packets from Subnet A..

You'll need a new ipsec.conf connection at GATEWAY A and GATEWAY B for Subnet A <-> Subnet C, (which I think you did)

Then you need a route ON GATEWAY B TO Subnet C via GATEWAY B1 (which I think you did),
** AND the opposite route back ON GATEWAY B1 TO Subnet A via GATEWAY B **

If that doesn't work, you may need to ask the FreeS/WAN guys since it might be an erouting problem on GATEWAY B.

That is assuming there is no NAT or Masquerading occuring anywhere.

Regards,

Quoted 9 lines

--
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Damion de Soto - Software Engineer email: [email protected]
SnapGear - A CyberGuard Company --- ph: +61 7 3435 2809

 | Custom Embedded Solutions          fax:         +61 7 3891 3630
 | and Security Appliances            web: http://www.snapgear.com

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
--- Free Embedded Linux Distro at http://www.snapgear.org ---

_________________________________________________________________
MSN Extra Storage: piena libertà di esprimersi e comunicare
http://www.msn.it/msnservizi/es/?xAPIDS4&DI44&SU=http://hotmail.it/&HL=HMTAGTX_MSN_Extra_Storage

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/