TEQL: 2 Mbit eth1 + 2Mbit eth2 = 1Mbit teql0]
bert hubert [email protected]
<PRE>>><i> On Tue, Oct 10, 2000 at 02:12:25PM +0200, Daniel Bergqvist wrote:
</I>>><i>
</I>>><i> This will show you "tc -s qdisc ls"
</I>
><i>There is no packet loss both eth1 and eth2.
</I>><i>
</I>>><i> Can you check to see if you are running with reverse path </I>>><i> filtering enabled?
</I>>><i> cat /proc/sys/net/ipv4/conf/eth0
</I>>><i> cat /proc/sys/net/ipv4/conf/eth1
</I>><i>
</I>><i>All three (eth0,eth1,eth2) is off on both routers.
</I>
Ok, then we need to go all out. Try this: tcpdump -i teql0 -w for.ahu, and run it while ftp-ing a file over teql0, end put this file online. Take care that there is no confidential data in the file you are ftp-ing.
If possible, try dumping eth0 and eth1 as well, simultaneously.
I'll take a look at the dump and see if anything is wrong.
Regards,
bert hubert
Signature · 6 lines
PowerDNS Versatile DNS Services Trilab The Technology People 'SYN! .. SYN|ACK! .. ACK!' - the mating call of the internet </PRE>