Skip to contentSkip to conversation

TEQL: 2 Mbit eth1 + 2Mbit eth2 = 1Mbit teql0]

[email protected]: SV: bert hubert [email protected] 1 participant 1 message Oct 10, 2000

lore
Share & tools
lore

bert hubert [email protected]

author
#0 lore raw

<PRE>&gt;&gt;<i> On Tue, Oct 10, 2000 at 02:12:25PM +0200, Daniel Bergqvist wrote:
</I>&gt;&gt;<i>
</I>&gt;&gt;<i> This will show you &quot;tc -s qdisc ls&quot;
</I>
&gt;<i>There is no packet loss both eth1 and eth2.
</I>&gt;<i>
</I>&gt;&gt;<i> Can you check to see if you are running with reverse path </I>&gt;&gt;<i> filtering enabled?
</I>&gt;&gt;<i> cat /proc/sys/net/ipv4/conf/eth0
</I>&gt;&gt;<i> cat /proc/sys/net/ipv4/conf/eth1
</I>&gt;<i>
</I>&gt;<i>All three (eth0,eth1,eth2) is off on both routers.
</I>
Ok, then we need to go all out. Try this: tcpdump -i teql0 -w for.ahu, and run it while ftp-ing a file over teql0, end put this file online. Take care that there is no confidential data in the file you are ftp-ing.

If possible, try dumping eth0 and eth1 as well, simultaneously.

I'll take a look at the dump and see if anything is wrong.

Regards,

bert hubert

Signature · 6 lines
PowerDNS                     Versatile DNS Services  
Trilab                       The Technology People   
'SYN! .. SYN|ACK! .. ACK!' - the mating call of the internet


</PRE>