routing perf.
R. Leponce [email protected]
<PRE>Hi all,
For my first message on this list, I have a forwarding problem:
* my machine is an old P90 with an ~old Linux OS (based on 2.2.13)
* I have two NIC (3c59x)
* flooding eth0 with Netperf (UDP traffic) cause my machine to use
almost 50% of my CPU (System) and loosing all my forwarding capabilities (bandwithd measured by Netperf: 10Kbit/s)
* I am also using an ipchains rule for masquerading
Can anybody give me a clue ?
I'm also using TC on eth1, but Netperf shows maximum bandwidth is used with TCP, il seems that all the physical capabilities of my eth1 interface is used even if I limit it's bandwidth with cbq/tbf) ...
Roms
Signature · 7 lines
<folop> y'a un fichier de 61 mo dans /proc c'est normal ? <mooby> ah non pas du tout <mooby> efface - #linuxfr ( huggy les bons tuyaux ) </PRE>