Skip to contentSkip to conversation

routing perf.

LARTC R. Leponce [email protected] 1 participant 1 message Dec 8, 2000

lore
Share & tools
lore

R. Leponce [email protected]

author
#0 lore raw

<PRE>Hi all,

For my first message on this list, I have a forwarding problem:
* my machine is an old P90 with an ~old Linux OS (based on 2.2.13)
* I have two NIC (3c59x)
* flooding eth0 with Netperf (UDP traffic) cause my machine to use
almost 50% of my CPU (System) and loosing all my forwarding capabilities (bandwithd measured by Netperf: 10Kbit/s)
* I am also using an ipchains rule for masquerading

Can anybody give me a clue ?
I'm also using TC on eth1, but Netperf shows maximum bandwidth is used with TCP, il seems that all the physical capabilities of my eth1 interface is used even if I limit it's bandwidth with cbq/tbf) ...

Roms

Signature · 7 lines
&lt;folop&gt; y'a un fichier de 61 mo dans /proc c'est normal ?
&lt;mooby&gt; ah non pas du tout
&lt;mooby&gt; efface
- #linuxfr ( huggy les bons tuyaux )


</PRE>