Skip to contentSkip to conversation

Directing traffic to prio qdisc bands

LARTC Oded Shaham 2 participants 2 messages Apr 19, 2001 – Apr 20, 2001

lore
Share & tools
lore
#0 lore raw

Hi,
I want to use the prio qdisc for prioritizing outgoing TCP SYNs over all other outgoing traffic.
I have managed to attach a prio qdisc to the root of an Ethernet device, by:

tc qdisc add dev eth0 root handle 1: prio

Now I want to do 2 things:
1. create a filter to catch TCP SYNs, and attach it to band 0 (highest priority).
2. direct all other traffic to higher bands (1 or 2).

I know how to define the appropriate filter with u32; there is a similar example in the LARTC HOWTO, for capturing ACKs. What I don't know is how to direct the traffic captured by a filter to a specific band. In the HOWTO I only see examples for attaching filters to CBQ classes.

Can someone advise me on this one ?

Best Regards,
Oded

Oded Shaham
Flash Networks
16 Galgalei Haplada, Herzliya, Israel
Tel: +972-9-9580666 ext. 215
Fax: +972-9-9564888
Cell phone: +972-5-4552009
Email: [email protected]

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/

#1 lore raw

I think it's easier to use ipchains :

ipchains -A output -m 1 # Mark every packet with "1"
ipchains -A output -m 2 -y -p tcp # Mark SYN with "2"

The filter rules :

tc filter add $DEV parent 10: protocol ip prio 3 handle 2 fw classid
10:2 # Put SYN in sub class 10:2
tc filter add $DEV parent 10: protocol ip prio 3 handle 2 fw classid 10:2

(I don't know the exact syntax for the prio-qdisc)

Staf

More QOS info : http://users.belgacom.net/staf/

Quoted 31 lines · Oded Shaham

Hi,
I want to use the prio qdisc for prioritizing outgoing TCP SYNs over all other outgoing traffic.
I have managed to attach a prio qdisc to the root of an Ethernet device, by:

tc qdisc add dev eth0 root handle 1: prio

Now I want to do 2 things:
1. create a filter to catch TCP SYNs, and attach it to band 0 (highest priority).
2. direct all other traffic to higher bands (1 or 2).

I know how to define the appropriate filter with u32; there is a similar example in the LARTC HOWTO, for capturing ACKs. What I don't know is how to direct the traffic captured by a filter to a specific band. In the HOWTO I only see examples for attaching filters to CBQ classes.

Can someone advise me on this one ?

Best Regards,
Oded

Oded Shaham
Flash Networks
16 Galgalei Haplada, Herzliya, Israel
Tel: +972-9-9580666 ext. 215
Fax: +972-9-9564888
Cell phone: +972-5-4552009
Email: [email protected]

Quoted 3 lines

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/