Directing traffic to prio qdisc bands
Hi,
I want to use the prio qdisc for prioritizing outgoing TCP SYNs over all other outgoing traffic.
I have managed to attach a prio qdisc to the root of an Ethernet device, by:
tc qdisc add dev eth0 root handle 1: prio
Now I want to do 2 things:
1. create a filter to catch TCP SYNs, and attach it to band 0 (highest priority).
2. direct all other traffic to higher bands (1 or 2).
I know how to define the appropriate filter with u32; there is a similar example in the LARTC HOWTO, for capturing ACKs. What I don't know is how to direct the traffic captured by a filter to a specific band. In the HOWTO I only see examples for attaching filters to CBQ classes.
Can someone advise me on this one ?
Best Regards,
Oded
Oded Shaham
Flash Networks
16 Galgalei Haplada, Herzliya, Israel
Tel: +972-9-9580666 ext. 215
Fax: +972-9-9564888
Cell phone: +972-5-4552009
Email: [email protected]
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
I think it's easier to use ipchains :
ipchains -A output -m 1 # Mark every packet with "1"
ipchains -A output -m 2 -y -p tcp # Mark SYN with "2"
The filter rules :
tc filter add $DEV parent 10: protocol ip prio 3 handle 2 fw classid
10:2 # Put SYN in sub class 10:2
tc filter add $DEV parent 10: protocol ip prio 3 handle 2 fw classid 10:2
(I don't know the exact syntax for the prio-qdisc)
Staf
More QOS info : http://users.belgacom.net/staf/
Quoted 31 lines · Oded Shaham
Hi,
I want to use the prio qdisc for prioritizing outgoing TCP SYNs over all other outgoing traffic.
I have managed to attach a prio qdisc to the root of an Ethernet device, by:tc qdisc add dev eth0 root handle 1: prio
Now I want to do 2 things:
1. create a filter to catch TCP SYNs, and attach it to band 0 (highest priority).
2. direct all other traffic to higher bands (1 or 2).I know how to define the appropriate filter with u32; there is a similar example in the LARTC HOWTO, for capturing ACKs. What I don't know is how to direct the traffic captured by a filter to a specific band. In the HOWTO I only see examples for attaching filters to CBQ classes.
Can someone advise me on this one ?
Best Regards,
OdedOded Shaham
Flash Networks
16 Galgalei Haplada, Herzliya, Israel
Tel: +972-9-9580666 ext. 215
Fax: +972-9-9564888
Cell phone: +972-5-4552009
Email: [email protected]
Quoted 3 lines
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/