wrr/bandwith control in ppp0
is possible to setup any bandwith resource control in a ppp0 interface? i'd like to distribute bandwith equally between pcs in a network, and inside each pc, equally between protocols... is this possible? all the documentation refers to eth0 type interfaces... so?
Signature · 8 lines
$~ who | grep -i brunette | date ; cd ~ ; unzip ; touch; strip; finger; mount; gasp; yes; uptime ; umount; sleep Diego Torres - [email protected] - Madrid / España _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
Hi,
Quoted 1 line
is possible to setup any bandwith resource control in a ppp0 interface?
I am almost sure that this is possible.
Quoted 2 lines
i'd like to distribute bandwith equally between pcs in a network, and inside each pc, equally between protocols... is this possible?
The example setup included with WRR should be appropriate. Inside each PC it will not distribute equally between protocols, though. It will use SFQ which distributes somewhat equally between sessions (which is probably what you want).
Quoted 1 line
all the documentation refers to eth0 type interfaces... so?
That's what most people use ;-)
Christian
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/