Skip to contentSkip to conversation

wrr/bandwith control in ppp0

LARTC Diego Torres 2 participants 2 messages Apr 22, 2001 – Apr 23, 2001

lore
Share & tools
lore
#0 lore raw

is possible to setup any bandwith resource control in a ppp0 interface? i'd like to distribute bandwith equally between pcs in a network, and inside each pc, equally between protocols... is this possible? all the documentation refers to eth0 type interfaces... so?

Signature · 8 lines
$~ who | grep -i brunette | date ; cd ~ ; unzip ; touch; strip; finger; mount; gasp; yes; uptime ; umount; sleep 

Diego Torres - [email protected] - Madrid / España


_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
#1 lore raw

Hi,

Quoted 1 line

is possible to setup any bandwith resource control in a ppp0 interface?

I am almost sure that this is possible.

Quoted 2 lines

i'd like to distribute bandwith equally between pcs in a network, and inside each pc, equally between protocols... is this possible?

The example setup included with WRR should be appropriate. Inside each PC it will not distribute equally between protocols, though. It will use SFQ which distributes somewhat equally between sessions (which is probably what you want).

Quoted 1 line

all the documentation refers to eth0 type interfaces... so?

That's what most people use ;-)

Christian

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/