Skip to contentSkip to conversation

Suggestion for improvements to nexthop implementation

LARTC Rolf MIssing 2 participants 2 messages May 24, 2001

lore
Share & tools
lore
#0 lore raw

I have a server connected :

	eth2	ADSL 500kbps	ISP 1
	eth1	Cable 1000kbps	ISP 2
	eth0	LAN 100Mbps

I am using :

	ip route add default nexthop via 192.168.1.1 dev eth1 weight 2 \
	nexthop via 192.168.2.1 dev eth2 weight 1

and a collection of other settings and routes that are not important to document for this suggestion.

I would like to assign real bandwidth figures to eth1,2 and have the Kernel decide what interface to route traffic to depending on the statistical load on the interface.

Is this a existing feature, how do I set it up ? if not could somebody who is smarter than me code it ?

We have cheap broad band and several friends have the same config I have the only trick is to get them combined with a reasonable load sharing logic.

Great stuff this Linux networking

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/