Suggestion for improvements to nexthop implementation
I have a server connected :
eth2 ADSL 500kbps ISP 1 eth1 Cable 1000kbps ISP 2 eth0 LAN 100Mbps
I am using :
ip route add default nexthop via 192.168.1.1 dev eth1 weight 2 \ nexthop via 192.168.2.1 dev eth2 weight 1
and a collection of other settings and routes that are not important to document for this suggestion.
I would like to assign real bandwidth figures to eth1,2 and have the Kernel decide what interface to route traffic to depending on the statistical load on the interface.
Is this a existing feature, how do I set it up ? if not could somebody who is smarter than me code it ?
We have cheap broad band and several friends have the same config I have the only trick is to get them combined with a reasonable load sharing logic.
Great stuff this Linux networking
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
Quoted 5 lines
I have a server connected :
eth2 ADSL 500kbps ISP 1 eth1 Cable 1000kbps ISP 2 eth0 LAN 100Mbps
I would like to see how this is also accomplished with the 2.2.x kernels. Thanks.
Bob
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/