Skip to contentSkip to conversation

network scaling

LARTC Mark Donaldson 3 participants 3 messages Jul 9, 2001 – Jul 10, 2001

lore
Share & tools
lore
#0 lore raw

HI

I'm trying to increase my bandwidth so that I can access all of my T1. My NICS are all Intel Server adapters. RedHat offers scaling but only to a maximum of 262K.

Does anyone know how to increase the bandwidth by increasing the scaling factor?

Does anyone know how to combine to Intel Server NICS to increase throughput?

Thank you

Mark
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/

#1 lore raw
Quoted 10 lines · Mark Donaldson

HI

I'm trying to increase my bandwidth so that I can access all of my T1. My NICS are all Intel Server adapters. RedHat offers scaling but only to a maximum of 262K.

Does anyone know how to increase the bandwidth by increasing the scaling factor?

Does anyone know how to combine to Intel Server NICS to increase throughput?

An old 10baseT could max out your T1 several times over.

262k sounds like the limit of eql, is that what you're using?

You need to be much more specific.

Mike

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/

#2 lore raw
In reply to Mark Donaldson
Quoted 3 lines

I'm trying to increase my bandwidth so that I can access all of my T1. My NICS are all Intel Server adapters. RedHat offers scaling but only to a maximum of 262K.

1) 262 kilobytes (KB) or kilobits (Kb)? Note: 262 kilobytes would equate to 2 megabits.

A really cheap ethernet card will do at least 3 megabits per second ... 10 is the minimum
rating, with 100 being more common now. Your ethernet card(s) is(are) not the problem.
--
Michael T. Babcock
CTO, FibreSpeed

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/