network scaling
HI
I'm trying to increase my bandwidth so that I can access all of my T1. My NICS are all Intel Server adapters. RedHat offers scaling but only to a maximum of 262K.
Does anyone know how to increase the bandwidth by increasing the scaling factor?
Does anyone know how to combine to Intel Server NICS to increase throughput?
Thank you
Mark
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
Quoted 10 lines · Mark Donaldson
HI
I'm trying to increase my bandwidth so that I can access all of my T1. My NICS are all Intel Server adapters. RedHat offers scaling but only to a maximum of 262K.
Does anyone know how to increase the bandwidth by increasing the scaling factor?
Does anyone know how to combine to Intel Server NICS to increase throughput?
An old 10baseT could max out your T1 several times over.
262k sounds like the limit of eql, is that what you're using?
You need to be much more specific.
Mike
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
Quoted 3 lines
I'm trying to increase my bandwidth so that I can access all of my T1. My NICS are all Intel Server adapters. RedHat offers scaling but only to a maximum of 262K.
1) 262 kilobytes (KB) or kilobits (Kb)? Note: 262 kilobytes would equate to 2 megabits.
A really cheap ethernet card will do at least 3 megabits per second ... 10 is the minimum
rating, with 100 being more common now. Your ethernet card(s) is(are) not the problem.
--
Michael T. Babcock
CTO, FibreSpeed
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/