Skip to contentSkip to conversation

Lockups on 2.4.1

Linux-ia64 Jack Steiner 4 participants 4 messages Feb 21, 2001

lore
Share & tools
lore
#0 lore raw
Quoted 7 lines

Anyway, I have ITPs connected to the IBM hardware and have noticed that when the lockup occurs, and we lose video, at least one of the CPUs is executing in flush_tlb_no_ptcg() or handle_IPI(), in the 'do' loop where TLB
entries are being purged. What I have observed is that the end address and the start address are in completely different regions. Usually, the start address

Quoted 8 lines

is in region register 1 (address of 0x2000XXXXXXXXXXXX) and the end address is in region register 3 (address of 0x6000XXXXXXXXXXXX). I don't know if this
is the same problem I am seeing on the Lion, but I plan to connect and ITP and
a serial console (although we haven't been able to get one to work yet on the
Lion with BIOS 71) to see if the symptoms are the same.

FWIW, we have seen EXACTLY the same hang running here on our system. The start/end addresses for the purge cross region boundaries.

We are running a 2.4.0 kernel.

Signature · 3 lines
Thanks

Jack Steiner    (651-683-5302)   (vnet 233-5302)      [email protected]
#1 lore raw

Just my observation:

The improvement I have seen using the 2.4.1-010131 kernel from any 2.4.0 ia64 kernel is major enough to upgrade.

I have not seen any lockups of the sort I have seen on this thread.

I am running a 4 proc Lion with 4 Gigs memory, Bios 71.

If you are seeing this issue on 2.4.0 I would upgrade.

--ken

-----Original Message-----
From: Jack Steiner [mailto:[email protected]]
Sent: Wednesday, February 21, 2001 11:48 AM
To: [email protected]
Subject: Re: Re: [Linux-ia64] Re: Lockups on 2.4.1

Quoted 8 lines

Anyway, I have ITPs connected to the IBM hardware and have noticed that when the lockup occurs, and we lose video, at least one of the CPUs is executing in flush_tlb_no_ptcg() or handle_IPI(), in the 'do' loop where TLB
entries are being purged. What I have observed is that the end address and the start address are in completely different regions. Usually, the start address
is in region register 1 (address of 0x2000XXXXXXXXXXXX) and the end

address

Quoted 7 lines

is in region register 3 (address of 0x6000XXXXXXXXXXXX). I don't know if this
is the same problem I am seeing on the Lion, but I plan to connect and ITP and
a serial console (although we haven't been able to get one to work yet on the
Lion with BIOS 71) to see if the symptoms are the same.

FWIW, we have seen EXACTLY the same hang running here on our system. The start/end addresses for the purge cross region boundaries.

We are running a 2.4.0 kernel.

Signature · 9 lines
Thanks

Jack Steiner    (651-683-5302)   (vnet 233-5302)      [email protected]


_______________________________________________
Linux-IA64 mailing list
[email protected]
http://lists.linuxia64.org/lists/listinfo/linux-ia64
#2 lore raw
In reply to Jack Steiner
Quoted 10 lines · Ken P

Just my observation:

The improvement I have seen using the 2.4.1-010131 kernel from any 2.4.0 ia64 kernel is major enough to upgrade.

I have not seen any lockups of the sort I have seen on this thread.

I am running a 4 proc Lion with 4 Gigs memory, Bios 71.

Same here. UP BigSur. 1G RAM and Bios 71.

H.J.

#3 lore raw
In reply to Jack Steiner

Definitely seeing this (at least the problem I reported) on a 2.4.1-010131 kernel.

Chris

Quoted 5 lines

Just my observation:

The improvement I have seen using the 2.4.1-010131 kernel from any 2.4.0 ia64 kernel is major enough to upgrade.

Quoted 7 lines

I have not seen any lockups of the sort I have seen on this thread.

I am running a 4 proc Lion with 4 Gigs memory, Bios 71.

If you are seeing this issue on 2.4.0 I would upgrade.

--ken

-----Original Message-----
From: Jack Steiner [mailto:[email protected]]
Sent: Wednesday, February 21, 2001 11:48 AM
To: [email protected]
Subject: Re: Re: [Linux-ia64] Re: Lockups on 2.4.1

Quoted 5 lines

Anyway, I have ITPs connected to the IBM hardware and have noticed that when the lockup occurs, and we lose video, at least one of the CPUs is executing in flush_tlb_no_ptcg() or handle_IPI(), in the 'do' loop where TLB
entries are being purged. What I have observed is that the end address

and

Quoted 3 lines

the start address are in completely different regions. Usually, the start address
is in region register 1 (address of 0x2000XXXXXXXXXXXX) and the end

address

Quoted 3 lines

is in region register 3 (address of 0x6000XXXXXXXXXXXX). I don't know if this
is the same problem I am seeing on the Lion, but I plan to connect and

ITP

Quoted 4 lines

and
a serial console (although we haven't been able to get one to work yet on the
Lion with BIOS 71) to see if the symptoms are the same.

FWIW, we have seen EXACTLY the same hang running here on our system. The start/end addresses for the purge cross region boundaries.

We are running a 2.4.0 kernel.

--
Thanks

Jack Steiner (651-683-5302) (vnet 233-5302) [email protected]

_______________________________________________
Linux-IA64 mailing list
[email protected]
http://lists.linuxia64.org/lists/listinfo/linux-ia64

_______________________________________________
Linux-IA64 mailing list
[email protected]
http://lists.linuxia64.org/lists/listinfo/linux-ia64