Lockups on 2.4.1
Quoted 7 lines
Anyway, I have ITPs connected to the IBM hardware and have noticed that when the lockup occurs, and we lose video, at least one of the CPUs is executing in
flush_tlb_no_ptcg()orhandle_IPI(), in the 'do' loop where TLB
entries are being purged. What I have observed is that the end address and the start address are in completely different regions. Usually, the start address
Quoted 8 lines
is in region register 1 (address of 0x2000XXXXXXXXXXXX) and the end address is in region register 3 (address of 0x6000XXXXXXXXXXXX). I don't know if this
is the same problem I am seeing on the Lion, but I plan to connect and ITP and
a serial console (although we haven't been able to get one to work yet on the
Lion with BIOS 71) to see if the symptoms are the same.
FWIW, we have seen EXACTLY the same hang running here on our system. The start/end addresses for the purge cross region boundaries.
We are running a 2.4.0 kernel.
Signature · 3 lines
Thanks Jack Steiner (651-683-5302) (vnet 233-5302) [email protected]
Just my observation:
The improvement I have seen using the 2.4.1-010131 kernel from any 2.4.0 ia64 kernel is major enough to upgrade.
I have not seen any lockups of the sort I have seen on this thread.
I am running a 4 proc Lion with 4 Gigs memory, Bios 71.
If you are seeing this issue on 2.4.0 I would upgrade.
--ken
-----Original Message-----
From: Jack Steiner [mailto:[email protected]]
Sent: Wednesday, February 21, 2001 11:48 AM
To: [email protected]
Subject: Re: Re: [Linux-ia64] Re: Lockups on 2.4.1
Quoted 8 lines
Anyway, I have ITPs connected to the IBM hardware and have noticed that when the lockup occurs, and we lose video, at least one of the CPUs is executing in
flush_tlb_no_ptcg()orhandle_IPI(), in the 'do' loop where TLB
entries are being purged. What I have observed is that the end address and the start address are in completely different regions. Usually, the start address
is in region register 1 (address of 0x2000XXXXXXXXXXXX) and the end
address
Quoted 7 lines
is in region register 3 (address of 0x6000XXXXXXXXXXXX). I don't know if this
is the same problem I am seeing on the Lion, but I plan to connect and ITP and
a serial console (although we haven't been able to get one to work yet on the
Lion with BIOS 71) to see if the symptoms are the same.
FWIW, we have seen EXACTLY the same hang running here on our system. The start/end addresses for the purge cross region boundaries.
We are running a 2.4.0 kernel.
Signature · 9 lines
Thanks Jack Steiner (651-683-5302) (vnet 233-5302) [email protected] _______________________________________________ Linux-IA64 mailing list [email protected] http://lists.linuxia64.org/lists/listinfo/linux-ia64
Quoted 10 lines · Ken P
Just my observation:
The improvement I have seen using the 2.4.1-010131 kernel from any 2.4.0 ia64 kernel is major enough to upgrade.
I have not seen any lockups of the sort I have seen on this thread.
I am running a 4 proc Lion with 4 Gigs memory, Bios 71.
Same here. UP BigSur. 1G RAM and Bios 71.
H.J.
Definitely seeing this (at least the problem I reported) on a 2.4.1-010131 kernel.
Chris
Quoted 5 lines
Just my observation:
The improvement I have seen using the 2.4.1-010131 kernel from any 2.4.0 ia64 kernel is major enough to upgrade.
Quoted 7 lines
I have not seen any lockups of the sort I have seen on this thread.
I am running a 4 proc Lion with 4 Gigs memory, Bios 71.
If you are seeing this issue on 2.4.0 I would upgrade.
--ken
-----Original Message-----
From: Jack Steiner [mailto:[email protected]]
Sent: Wednesday, February 21, 2001 11:48 AM
To: [email protected]
Subject: Re: Re: [Linux-ia64] Re: Lockups on 2.4.1
Quoted 5 lines
Anyway, I have ITPs connected to the IBM hardware and have noticed that when the lockup occurs, and we lose video, at least one of the CPUs is executing in
flush_tlb_no_ptcg()orhandle_IPI(), in the 'do' loop where TLB
entries are being purged. What I have observed is that the end address
and
Quoted 3 lines
the start address are in completely different regions. Usually, the start address
is in region register 1 (address of 0x2000XXXXXXXXXXXX) and the end
address
Quoted 3 lines
is in region register 3 (address of 0x6000XXXXXXXXXXXX). I don't know if this
is the same problem I am seeing on the Lion, but I plan to connect and
ITP
Quoted 4 lines
and
a serial console (although we haven't been able to get one to work yet on the
Lion with BIOS 71) to see if the symptoms are the same.
FWIW, we have seen EXACTLY the same hang running here on our system. The start/end addresses for the purge cross region boundaries.
We are running a 2.4.0 kernel.
--
Thanks
Jack Steiner (651-683-5302) (vnet 233-5302) [email protected]
_______________________________________________
Linux-IA64 mailing list
[email protected]
http://lists.linuxia64.org/lists/listinfo/linux-ia64
_______________________________________________
Linux-IA64 mailing list
[email protected]
http://lists.linuxia64.org/lists/listinfo/linux-ia64