help set up AWE64G isapnp?
I've been wrestling with trying to get my AWE64g pnp running on my RedHat box, but arn't getting anywhere. I've followed all the instructions in the sound-howto, awe-mini-howto, isapnp-howto, kernel-howto etc. to no avail.
I am running a RedHat 5.2 box that I upgraded from 5.1. It is now running kernel 2.2.1. I have compiled the sound drivers as modules.
attached is a copy of my isapnp.conf, which has all the settings that windows reports should be correct.
here's what happens when I try to load the sound module:
Script started on Mon Feb 15 20:10:26 1999 [root@bw66 .netscape]# modprobe -a sound /lib/modules/2.2.1/misc/sb.o: too many values for dma (max 1)
sound: Device or resource busy
[root@bw66 .netscape]#
[root@bw66 .netscape]# exit
Script done on Mon Feb 15 20:10:40 1999
I'm really quite frustrated and confused. I've tried this from start to finish half a dozen times to make sure I wasn't skipping any steps and i can't see where I'm going wrong. Any help would be GREATLY appriciated, since my senior project which is due in 2 march is depending on this.
Thanks in advace,
Josh
---
Joshua W. H. Steiner - [email protected] - http://eds.org/~joschi
"Some scientists claim that hydrogen, because it is so plentyful, is the basic building block of the universe. I dispute that. I say there is more stupidity than hydrogen, and that is the basic building block of the universe."
- Frank Zappa
# $Id: pnpdump.c,v 1.10 1997/07/14 22:30:47 fox Exp $ # This is free software, see the sources for details. # This software has NO WARRANTY, use at your OWN RISK #
# For details of this file format, see isapnp.conf(5) #
# For latest information on isapnp and pnpdump see:
# http://www.roestock.demon.co.uk/isapnptools/
#
# Compiler flags: -DREALTIME -DNEEDSETSCHEDULER
#
# Trying port address 0203
# Board 1 has serial identifier 40 09 53 7c 8f 9e 00 8c 0e
# (DEBUG)
(READPORT 0x0203)
(ISOLATE)
(IDENTIFY *)
# ANSI string -->Creative SB AWE64 Gold<--
(CONFIGURE CTL009e/156466319 (LD 0
# ANSI string -->Audio<--
(INT 0 (IRQ 5 (MODE +E)))
(DMA 0 (CHANNEL 1))
(DMA 1 (CHANNEL 5))
(IO 0 (BASE 0x220))
(IO 1 (BASE 0x0330))
(IO 2 (BASE 0x0388))
(ACT Y)
))
(CONFIGURE CTL009e/156466319 (LD 1
# ANSI string -->Game<--
(IO 0 (BASE 0x0200))
(ACT Y)
))
(CONFIGURE CTL009e/156466319 (LD 2
# ANSI string -->WaveTable<--
(IO 0 (BASE 0x0620))
(IO 0 (BASE 0x0A20))
(IO 0 (BASE 0x0E20))
(ACT Y)
))
# Returns all cards to the "Wait for Key" state
(WAITFORKEY)
Quoted 3 lines · Josh Steiner
Script started on Mon Feb 15 20:10:26 1999 [root@bw66 .netscape]# modprobe -a sound
/lib/modules/2.2.1/misc/sb.o: too many values for dma (max 1)
Replace the 'dma=1,5' in /etc/conf.modules with
'dma=1 dma16=5'.
Bill