Skip to contentSkip to conversation

help set up AWE64G isapnp?

DISCUSSION Josh Steiner 2 participants 2 messages Feb 16, 1999 Sound

lore
Share & tools
lore
#0 lore raw

I've been wrestling with trying to get my AWE64g pnp running on my RedHat box, but arn't getting anywhere. I've followed all the instructions in the sound-howto, awe-mini-howto, isapnp-howto, kernel-howto etc. to no avail.

I am running a RedHat 5.2 box that I upgraded from 5.1. It is now running kernel 2.2.1. I have compiled the sound drivers as modules.

attached is a copy of my isapnp.conf, which has all the settings that windows reports should be correct.

here's what happens when I try to load the sound module:

Script started on Mon Feb 15 20:10:26 1999 [root@bw66 .netscape]# modprobe -a sound /lib/modules/2.2.1/misc/sb.o: too many values for dma (max 1)
sound: Device or resource busy
[root@bw66 .netscape]#
[root@bw66 .netscape]# exit

Script done on Mon Feb 15 20:10:40 1999

I'm really quite frustrated and confused. I've tried this from start to finish half a dozen times to make sure I wasn't skipping any steps and i can't see where I'm going wrong. Any help would be GREATLY appriciated, since my senior project which is due in 2 march is depending on this.

Thanks in advace,

Josh

---
Joshua W. H. Steiner - [email protected] - http://eds.org/~joschi

"Some scientists claim that hydrogen, because it is so plentyful, is the basic building block of the universe. I dispute that. I say there is more stupidity than hydrogen, and that is the basic building block of the universe."
- Frank Zappa

# $Id: pnpdump.c,v 1.10 1997/07/14 22:30:47 fox Exp $ # This is free software, see the sources for details. # This software has NO WARRANTY, use at your OWN RISK #
# For details of this file format, see isapnp.conf(5) #
# For latest information on isapnp and pnpdump see:
# http://www.roestock.demon.co.uk/isapnptools/
#
# Compiler flags: -DREALTIME -DNEEDSETSCHEDULER
#
# Trying port address 0203
# Board 1 has serial identifier 40 09 53 7c 8f 9e 00 8c 0e

# (DEBUG)
(READPORT 0x0203)
(ISOLATE)
(IDENTIFY *)

# ANSI string -->Creative SB AWE64 Gold<--

(CONFIGURE CTL009e/156466319 (LD 0
# ANSI string -->Audio<--
(INT 0 (IRQ 5 (MODE +E)))
(DMA 0 (CHANNEL 1))
(DMA 1 (CHANNEL 5))
(IO 0 (BASE 0x220))
(IO 1 (BASE 0x0330))
(IO 2 (BASE 0x0388))
(ACT Y)
))

(CONFIGURE CTL009e/156466319 (LD 1
# ANSI string -->Game<--
(IO 0 (BASE 0x0200))
(ACT Y)
))

(CONFIGURE CTL009e/156466319 (LD 2
# ANSI string -->WaveTable<--

(IO 0 (BASE 0x0620))
(IO 0 (BASE 0x0A20))
(IO 0 (BASE 0x0E20))
(ACT Y)
))

# Returns all cards to the "Wait for Key" state
(WAITFORKEY)

#1 lore raw
Quoted 3 lines · Josh Steiner

Script started on Mon Feb 15 20:10:26 1999 [root@bw66 .netscape]# modprobe -a sound /lib/modules/2.2.1/misc/sb.o: too many values for dma (max 1)

Replace the 'dma=1,5' in /etc/conf.modules with
'dma=1 dma16=5'.

Bill