burning CDs with an IDE CDR drive
hi,
has anyone managed to burn CDs using an ATAPI/IDE drive? i've just installed RH6.0, and i've found several docs that mention that it's possible if you use IDE-SCSI emulation. but i can't seem to figure out how to get it to work.
thanks,
douglas
--------------------------------------------------------------------------
douglas irving repetto nee irving bellemead
http://music.dartmouth.edu/~douglas
music-dsp mailing list web site:
http://shoko.calarts.edu/~glmrboy/musicdsp
--------------------------------------------------------------------------
Quoted 9 lines · douglas irving repetto
hi,
has anyone managed to burn CDs using an ATAPI/IDE drive? i've just installed RH6.0, and i've found several docs that mention that it's possible if you use IDE-SCSI emulation. but i can't seem to figure out how to get it to work.
thanks,
Douglas,
I've recompiled the emulation in and Xcdroast tells me I haven't.
So I'm just burning in "you know what!" till the waters settle a little in MY kernel :(
---------------------------------------------------------------------
Signature · 5 lines
" saevis tranquillus in undis "
___ Linux Anthem ___
Bill Schoolcraft http://www.wiliweld.comCheck the CD-Writing HOWTO, which you can get from any LDP mirror such as http://www.linuxdoc.org
Basically if you compile IDE SCSI emulation into your kernel and load the ide-scsi module you should be in business.
(and this is probably not the best forum for this because it has little to do with sound)
Quoted 6 lines · douglas irving repetto
hi,
has anyone managed to burn CDs using an ATAPI/IDE drive? i've just installed RH6.0, and i've found several docs that mention that it's possible if you use IDE-SCSI emulation. but i can't seem to figure out how to get it to work.
--
Jeff Tranter (mailto:[email protected] http://www.pobox.com/~tranter)
I will not be pushed, filed, stamped, indexed, briefed, debriefed, or numbered. Visit the Linux Documentation Project at http://www.linuxdoc.org
Quoted 10 lines · Bill Schoolcraft
Quoted 4 lines · douglas irving repetto
has anyone managed to burn CDs using an ATAPI/IDE drive? i've just installed RH6.0, and i've found several docs that mention that it's possible if you use IDE-SCSI emulation. but i can't seem to figure out how to get it to work.
Douglas,
I've recompiled the emulation in and Xcdroast tells me I haven't.
So I'm just burning in "you know what!" till the waters settle a little in MY kernel :(
Yes, I've done it. However, note that the emulation doesn't work if you already HAVE a SCSI card in there. Also, this isn't really related to sound as it's mostly for burning data CDs -- you probably want the cdrecord mailing list.
Xcdroast will do a sanity check on your settings and tell you what you did wrong. :)
Signature · 4 lines
_Deirdre * http://www.linuxcabal.org * http://www.deirdre.net "I have a simple rule in life: If I don't understand something, it must be bad." & "If you want more than 4 gig of memory, get a *real* CPU." -- Linus Torvalds, speaking at BALUG (www.balug.org)
I use a mitsumi IDE CDR...
on my default turbolinux install, i didnt have to do a thing...
i installed; fired up xcdroast & did my thing... well turbolinux is a redhat based distribution...
on my slakware box, i do it the old way:
recompile the kernel without ATAPI CDROM, with scsi-emeu, scsi-generic & off she goes...
On 6/24/99, 12:20:45 AM, douglas irving repetto <[email protected]> wrote regarding burning CDs with an IDE CDR drive:
Quoted 5 lines
hi,
has anyone managed to burn CDs using an ATAPI/IDE drive? i've just installed RH6.0, and i've found several docs that mention that it's possible if you use IDE-SCSI emulation. but i can't seem to figure out
how
Quoted 8 lines
to get it to work.
thanks,
douglas
-----------------------------------------------------------------------
---
Quoted 5 lines
douglas irving repetto nee irving bellemead
http://music.dartmouth.edu/~douglas
music-dsp mailing list web site:
http://shoko.calarts.edu/~glmrboy/musicdsp
-----------------------------------------------------------------------
---
Here's what I did, from memory:
I have IDE CD Drives: a CD-ROM and a CD-RW/dev/hdc is the CD-ROM/dev/hdd is the CD-RW
Compile the kernel with:
SCSI Support: built in
SCSI CD-ROM support: built in
SCSI Generic Support (sg): built in
SCSI Emulation (ide-scsi): as module
IDE-CDROM support (ide-cd): as module
LOOPBACK device: as module
I chose to build ide-scsi as a module so that I could still use my CD-ROM as an IDE device. Here's what I added to conf.modules:
options ide-scsi ignore=hdc
options ide-cd ignore=hdd
and to lilo.conf:
append="hdc=ide-cd hdd=ide-scsi"
I need these since whichever of the modules (ide-scsi or ide-cd) loads first, will attempt to control both drives. The second module gets squat. If you don't mind having both drives under SCSI emulation, then don't build ide-scsi support at all, and build SCSI emulation directly into the kernel.
Again, this is from memory. The thing that screwed me up was that I was building some of the items like SCSI-generic as modules, when support needed to be there during booting process. Loading sg as a module won't work. The CD-Writing HOWTO is (I believe) wrong in this case.
Bryan
Quoted 11 lines
hi,
has anyone managed to burn CDs using an ATAPI/IDE drive? i've just installed RH6.0, and i've found several docs that mention that it's possible if you use IDE-SCSI emulation. but i can't seem to figure out how to get it to work.
thanks,
douglas