Skip to contentSkip to conversation

burning CDs with an IDE CDR drive

DISCUSSION douglas irving repetto 6 participants 6 messages Jun 23, 1999 – Jun 24, 1999 Sound

lore
Share & tools
lore
#0 lore raw

hi,

has anyone managed to burn CDs using an ATAPI/IDE drive? i've just installed RH6.0, and i've found several docs that mention that it's possible if you use IDE-SCSI emulation. but i can't seem to figure out how to get it to work.

thanks,

douglas

--------------------------------------------------------------------------
douglas irving repetto nee irving bellemead
http://music.dartmouth.edu/~douglas
music-dsp mailing list web site:
http://shoko.calarts.edu/~glmrboy/musicdsp
--------------------------------------------------------------------------

#1 lore raw
Quoted 9 lines · douglas irving repetto

hi,

has anyone managed to burn CDs using an ATAPI/IDE drive? i've just installed RH6.0, and i've found several docs that mention that it's possible if you use IDE-SCSI emulation. but i can't seem to figure out how to get it to work.

thanks,

Douglas,

I've recompiled the emulation in and Xcdroast tells me I haven't.
So I'm just burning in "you know what!" till the waters settle a little in MY kernel :(
---------------------------------------------------------------------

Signature · 5 lines
	               " saevis tranquillus in undis "

	                    ___ Linux  Anthem ___
         	        
                 Bill Schoolcraft    http://www.wiliweld.com
#2 lore raw
In reply to douglas irving repetto

Check the CD-Writing HOWTO, which you can get from any LDP mirror such as http://www.linuxdoc.org

Basically if you compile IDE SCSI emulation into your kernel and load the ide-scsi module you should be in business.

(and this is probably not the best forum for this because it has little to do with sound)

Quoted 6 lines · douglas irving repetto

hi,

has anyone managed to burn CDs using an ATAPI/IDE drive? i've just installed RH6.0, and i've found several docs that mention that it's possible if you use IDE-SCSI emulation. but i can't seem to figure out how to get it to work.

--
Jeff Tranter (mailto:[email protected] http://www.pobox.com/~tranter)
I will not be pushed, filed, stamped, indexed, briefed, debriefed, or numbered. Visit the Linux Documentation Project at http://www.linuxdoc.org

#3 lore raw
In reply to douglas irving repetto
Quoted 10 lines · Bill Schoolcraft
Quoted 4 lines · douglas irving repetto

has anyone managed to burn CDs using an ATAPI/IDE drive? i've just installed RH6.0, and i've found several docs that mention that it's possible if you use IDE-SCSI emulation. but i can't seem to figure out how to get it to work.

Douglas,
I've recompiled the emulation in and Xcdroast tells me I haven't.
So I'm just burning in "you know what!" till the waters settle a little in MY kernel :(

Yes, I've done it. However, note that the emulation doesn't work if you already HAVE a SCSI card in there. Also, this isn't really related to sound as it's mostly for burning data CDs -- you probably want the cdrecord mailing list.

Xcdroast will do a sanity check on your settings and tell you what you did wrong. :)

Signature · 4 lines
_Deirdre   *   http://www.linuxcabal.org   *   http://www.deirdre.net
"I have a simple rule in life: If I don't understand something, it must be
bad." & "If you want more than 4 gig of memory, get a *real* CPU."
-- Linus Torvalds, speaking at BALUG (www.balug.org)
#4 lore raw
In reply to douglas irving repetto

I use a mitsumi IDE CDR...

on my default turbolinux install, i didnt have to do a thing...

i installed; fired up xcdroast & did my thing... well turbolinux is a redhat based distribution...

on my slakware box, i do it the old way:

recompile the kernel without ATAPI CDROM, with scsi-emeu, scsi-generic & off she goes...

On 6/24/99, 12:20:45 AM, douglas irving repetto <[email protected]> wrote regarding burning CDs with an IDE CDR drive:

Quoted 5 lines

hi,

has anyone managed to burn CDs using an ATAPI/IDE drive? i've just installed RH6.0, and i've found several docs that mention that it's possible if you use IDE-SCSI emulation. but i can't seem to figure out

how

Quoted 8 lines

to get it to work.

thanks,

douglas

-----------------------------------------------------------------------
---

Quoted 5 lines

douglas irving repetto nee irving bellemead
http://music.dartmouth.edu/~douglas
music-dsp mailing list web site:
http://shoko.calarts.edu/~glmrboy/musicdsp

-----------------------------------------------------------------------
---

#5 lore raw
In reply to douglas irving repetto

Here's what I did, from memory:

I have IDE CD Drives: a CD-ROM and a CD-RW
/dev/hdc is the CD-ROM
/dev/hdd is the CD-RW

Compile the kernel with:
SCSI Support: built in
SCSI CD-ROM support: built in
SCSI Generic Support (sg): built in
SCSI Emulation (ide-scsi): as module
IDE-CDROM support (ide-cd): as module
LOOPBACK device: as module

I chose to build ide-scsi as a module so that I could still use my CD-ROM as an IDE device. Here's what I added to conf.modules:
options ide-scsi ignore=hdc
options ide-cd ignore=hdd

and to lilo.conf:
append="hdc=ide-cd hdd=ide-scsi"

I need these since whichever of the modules (ide-scsi or ide-cd) loads first, will attempt to control both drives. The second module gets squat. If you don't mind having both drives under SCSI emulation, then don't build ide-scsi support at all, and build SCSI emulation directly into the kernel.

Again, this is from memory. The thing that screwed me up was that I was building some of the items like SCSI-generic as modules, when support needed to be there during booting process. Loading sg as a module won't work. The CD-Writing HOWTO is (I believe) wrong in this case.

Bryan

Quoted 11 lines

hi,

has anyone managed to burn CDs using an ATAPI/IDE drive? i've just installed RH6.0, and i've found several docs that mention that it's possible if you use IDE-SCSI emulation. but i can't seem to figure out how to get it to work.

thanks,

douglas