Skip to contentSkip to conversation

stac9200 speaker/hp not detected

DISCUSSION Brian Hinz 2 participants 8 messages Jul 4, 2007 – Jul 9, 2007

lore
Share & tools
lore

Brian Hinz

author
#0 lore raw

Hi,

I'm trying to get the sound working on my Gateway S-7110M (a.k.a. NX100X?). Using the ini files from the windows driver, I created the following patch (applied to both the hg tree, and 1.0.14):

--- a/alsa-kernel/pci/hda/patch_sigmatel.c 2007-07-03
21:59:21.000000000 -0400
+++ b/alsa-kernel/pci/hda/patch_sigmatel.c 2007-06-04
03:28:54.000000000 -0400
@@ -39,6 +39,7 @@

enum {
STAC_REF,
+ STAC_M4,

        STAC_9200_MODELS
};

@@ -453,12 +452,19 @@

        0x02a19020, 0x01a19021, 0x90100140, 0x01813122,
};

+static unsigned int stac9200_M4_pin_configs[8] = {
+ 0x400000fe, 0x00451030, 0x400100f0, 0x90110010,
+ 0x400100f1, 0x02a1902e, 0x500000f2, 0x500000f3,
+};
+

static unsigned int *stac9200_brd_tbl[STAC_9200_MODELS] = {
        [STAC_REF] = ref9200_pin_configs,

+ [STAC_M4] = stac9200_M4_pin_configs,
};

static const char *stac9200_models[STAC_9200_MODELS] = {
        [STAC_REF] = "ref",

+ [STAC_M4] = "m4",
};

static struct snd_pci_quirk stac9200_cfg_tbl[] = { @@ -494,6 +486,9 @@

        SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x01f5,
                      "Dell Inspiron 1501", STAC_REF),

+ /* Gateway */
+ SND_PCI_QUIRK(0x107b, 0x0205, "Gateway S-7110M", STAC_M4),
+

        /* Panasonic */
        SND_PCI_QUIRK(0x10f7, 0x8338, "Panasonic CF-74", STAC_REF),

however it still does not work. I can see in dmesg that the speaker and headphones are not detected, but I can't seem to figure out why:

[95006.300000] ALSA 
/home/bphinz/alsa/alsa-hg/alsa-driver/pci/hda/hda_codec.c:1810: hda_codec: 
model 'm4' is selected
[95006.300000] ALSA 
/home/bphinz/alsa/alsa-hg/alsa-driver/pci/hda/hda_codec.c:2339: autoconfig: 
line_outs=1 (0xe/0x0/0x0/0x0/0x0)
[95006.300000] ALSA 
/home/bphinz/alsa/alsa-hg/alsa-driver/pci/hda/hda_codec.c:2343:    
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[95006.300000] ALSA 
/home/bphinz/alsa/alsa-hg/alsa-driver/pci/hda/hda_codec.c:2347:    hp_outs=0 
(0x0/0x0/0x0/0x0/0x0)
[95006.300000] ALSA 
/home/bphinz/alsa/alsa-hg/alsa-driver/pci/hda/hda_codec.c:2355:    inputs: 
mic=0x0, fmic=0x10, line=0x0, fline=0x0, cd=0x0, aux=0x0
[95006.432000] ALSA 
/home/bphinz/alsa/alsa-hg/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/patch_si3054.c:244: 
si3054: cannot initialize. EXT MID = 0000
[95006.432000] ALSA 

/home/bphinz/alsa/alsa-hg/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/patch_si3054.c:256:
Link Frame Detect(FDT) is not ready (line status: 0000)

This laptop has only an internal speaker, a headphone out, and a mic in (unless there are other outs enabled when the dock is connected). The windows INI seems to be setting some gpio bits but I don't understand how to map the ini syntax into the alsa driver (or if it needs to be...)

[Models]
HDAUDIO\FUNC_01&VEN_8384&DEV_7690=this
Default=this
[CopyFiles.32]
stacgui.cpl = 0x25
stlang.dll = 0x25
stacsv.exe = 0x25
[CopyFiles.64]
stacui64.cpl = 0x25
stlang64.dll = 0x25
stacsv64.exe = 0x25
[LaunchProgramsAfter.32]
STacSV -r
[LaunchProgramsAfter.64]
STacSV64 -r [HKLM\Software\Microsoft\Windows\CurrentVersion\Run.32] [HKLM\Software\Microsoft\Windows\CurrentVersion\Run.64] [DelRegKeys]
HKR\Settings=Yes HKCU\Software\Sigmatel\Settings=Yes HKLM\Software\Sigmatel\Presets=Yes HKCU\Software\Microsoft\Windows\CurrentVersion\Applets\Volume Control\SigmaTel Audio=Yes HKCU\Software\Microsoft\Windows\CurrentVersion\Applets\Volume Control\SigmaTel C-Major Audio=Yes HKCU\Software\Microsoft\Windows\CurrentVersion\Applets\Volume Control\SigmaTel High Definition Audio=Yes [HKLM\Software\Sigmatel\GlobalState]
[HKR]
CodecName = "STAC9200"
[HKR\Settings]
TraceFlags = dword: 0x89B3
CPL_SaveExtraPower = hex: 0 CPL_UserControlsFixedDigitalOutRate = hex: 0
InitVerbs = hex: 0x03, 0xa0, 0x43, 0x01
9200MixerCompensation1PcmMode = hex: 2 9200MixerCompensation2PcmMode = hex: 3 CodecAccessAttempts = dword:00000352 [HKR\Settings\GPIO]
03 = hex: 0x85
AntiPopGpo = hex: 3,2
[HKR\Settings\pin]
[HKR\Settings\Pin\08]
CfgDflt = dword: 0x400000FE
[HKR\Settings\Pin\09]
CfgDflt = dword: 0x00451030
[HKR\Settings\Pin\0D]
CfgDflt = dword: 0x400100F0
[HKR\Settings\Pin\0E]
CfgDflt = dword: 0x90110010
Action = hex: 81,09
[HKR\Settings\Pin\0F]
CfgDflt = dword: 0x400100F1
[HKR\Settings\Pin\10]
CfgDflt = dword: 0x02A1902E
[HKR\Settings\Pin\11]
CfgDflt = dword: 0x500000F2
[HKR\Settings\Pin\12]
CfgDflt = dword: 0x500000F3 [HKR\Settings\Connselector] [HKR\settings\filter\Speaker]

UniqueID                             = hex: 0
LegacyIoctlHere                      = hex: 1
Pins                                 = hex: 0E
RenderConverter                      = hex: 2
Associations                         = hex: 1
DigitalVolumeControl                 = hex: 0
EnableSetFormatSupport               = hex: 1
EnableHwSpeakerConfigurationSupport  = hex: 0
EnabledPcmRenderBitsAndRates         = dword: 0x000FFFFE
MasterControlsIndependentMixerInputs = hex: 0
EnableVendorPcBeep                   = hex: 1
PcBeepVolume                         = dword: 0
PcBeepMute                           = hex: 1
EnableInputMonitor                   = hex: 1

RecMonitorMute = hex: 1
EnabledNonPcmBitsAndRates = dword: 0x20040
BiosInterfaceAddress = dword: 0x000DF7E0
[HKR\settings\filter\SpdifOut]

UniqueID                             = hex: 1
LegacyIoctlHere                      = hex: 0
Pins                                 = hex: 09
SpdifOutConverter                    = hex: 5
SpdifMaster                          = hex:
Associations                         = hex: 3
EnabledPcmRenderSpdifBitsAndRates         = dword: 0x000FFFFF
DisableSPDIFControl                  = hex: 0
[HKR\Settings\filter\MuxedIn]
UniqueID                             = hex: 2
LegacyIoctlHere                      = hex: 0
Pins                                 = hex: 10
CaptureConverter                     = hex: 3
EnableCompositeMuxAndAdcCtrl         = hex: 0
Associations                         = hex: 2
MicBoost                             = hex: 1

DisableMicBoost = hex: 0
EnabledPcmCaptureBitsAndRates = dword: 0x000FFFFF
MicInRecVolume = dword: 0x000a8000
[HKR\Settings\filter\MuxedIn\MaxLvlLimiters]
MicBoostLevel = dword: 0x000c0000
[HKR\Settings\filter\MuxedIn\TopoNames] [HKLM\software\SigmaTel\Apo\GFX\Speaker\plugins\MSAPO]
idEffect = dword: 50
idEffectType = dword: 50
load = dword: 1
order = dword: 5
ApoClsId = "{637c490d-eee3-4c0a-973f-371958802da2}" [HKLM\software\SigmaTel\Apo\LFX\Speaker\plugins\MSAPO]
idEffect = dword: 50
idEffectType = dword: 50
load = dword: 1
order = dword: 5
ApoClsId = "{62dc1a93-ae24-464c-a43e-452f824c4250}" [HKLM\software\SigmaTel\Apo\GFX\SpdifOut\plugins\MSAPO]
idEffect = dword: 50
idEffectType = dword: 50
load = dword: 1
order = dword: 5
ApoClsId = "{637c490d-eee3-4c0a-973f-371958802da2}" [HKLM\software\SigmaTel\Apo\LFX\SpdifOut\plugins\MSAPO]
idEffect = dword: 50
idEffectType = dword: 50
load = dword: 1
order = dword: 5
ApoClsId = "{62dc1a93-ae24-464c-a43e-452f824c4250}" [HKLM\Software\Sigmatel\APO\GFX\Speaker\plugins\SysEq]
Load = dword: 1
IdEffect = dword: 101
IdEffectType = dword: 1
Order = dword: 1100 [HKLM\Software\Sigmatel\APO\GFX\Speaker\presets\_Initial\SysEq] NumBands = dword:12
RegVersion = dword: 1
Bypass = dword: 0 [HKLM\Software\Sigmatel\APO\GFX\Speaker\presets\_Initial\SysEq\Band0] idxBand = dword: 0
Flags = dword: 0
ChannelMask = dword: 262143
Type = dword: 1
GroupId = dword: 0
Freq =dword: 150
GainDbx1000 = dword: -3000
Bandwidthx1000 = dword: 1000 [HKLM\Software\Sigmatel\APO\GFX\Speaker\presets\_Initial\SysEq\Band1] idxBand = dword: 1
Flags = dword: 0
ChannelMask = dword: 262143
Type = dword: 0
GroupId = dword: 0
Freq =dword: 300
GainDbx1000 = dword: -3000
Bandwidthx1000 = dword: 1000 [HKLM\Software\Sigmatel\APO\GFX\Speaker\presets\_Initial\SysEq\Band2] idxBand = dword: 2
Flags = dword: 0
ChannelMask = dword: 262143
Type = dword: 0
GroupId = dword: 0
Freq =dword: 500
GainDbx1000 = dword: -2000
Bandwidthx1000 = dword: 1000 [HKLM\Software\Sigmatel\APO\GFX\Speaker\presets\_Initial\SysEq\Band3] idxBand = dword: 3
Flags = dword: 0
ChannelMask = dword: 262143
Type = dword: 0
GroupId = dword: 0
Freq =dword: 750
GainDbx1000 = dword: -1000
Bandwidthx1000 = dword: 1000 [HKLM\Software\Sigmatel\APO\GFX\Speaker\presets\_Initial\SysEq\Band4] idxBand = dword: 4
Flags = dword: 0
ChannelMask = dword: 262143
Type = dword: 0
GroupId = dword: 0
Freq =dword: 1000
GainDbx1000 = dword: 0
Bandwidthx1000 = dword: 1000 [HKLM\Software\Sigmatel\APO\GFX\Speaker\presets\_Initial\SysEq\Band5] idxBand = dword: 5
Flags = dword: 0
ChannelMask = dword: 262143
Type = dword: 0
GroupId = dword: 0
Freq =dword: 2000
GainDbx1000 = dword: -1000
Bandwidthx1000 = dword: 1000 [HKLM\Software\Sigmatel\APO\GFX\Speaker\presets\_Initial\SysEq\Band6] idxBand = dword: 6
Flags = dword: 0
ChannelMask = dword: 262143
Type = dword: 0
GroupId = dword: 0
Freq =dword: 8000
GainDbx1000 = dword: 0
Bandwidthx1000 = dword: 1000 [HKLM\Software\Sigmatel\APO\GFX\Speaker\presets\_Initial\SysEq\Band7] idxBand = dword: 7
Flags = dword: 0
ChannelMask = dword: 262143
Type = dword: 0
GroupId = dword: 0
Freq =dword: 12000
GainDbx1000 = dword: 0
Bandwidthx1000 = dword: 1000 [HKLM\Software\Sigmatel\APO\GFX\Speaker\presets\_Initial\SysEq\Band8] idxBand = dword: 8
Flags = dword: 0
ChannelMask = dword: 262143
Type = dword: 0
GroupId = dword: 0
Freq =dword: 15000
GainDbx1000 = dword: 0
Bandwidthx1000 = dword: 1000 [HKLM\Software\Sigmatel\APO\GFX\Speaker\presets\_Initial\SysEq\Band9] idxBand = dword: 9
Flags = dword: 0
ChannelMask = dword: 262143
Type = dword: 0
GroupId = dword: 0
Freq =dword: 17000
GainDbx1000 = dword: -1000
Bandwidthx1000 = dword: 1000 [HKLM\Software\Sigmatel\APO\GFX\Speaker\presets\_Initial\SysEq\Band10] idxBand = dword: 10
Flags = dword: 0
ChannelMask = dword: 262143
Type = dword: 0
GroupId = dword: 0
Freq =dword: 17000
GainDbx1000 = dword: -1000
Bandwidthx1000 = dword: 1000 [HKLM\Software\Sigmatel\APO\GFX\Speaker\presets\_Initial\SysEq\Band11] idxBand = dword: 11
Flags = dword: 0
ChannelMask = dword: 262143
Type = dword: 2
GroupId = dword: 0
Freq =dword: 17000
GainDbx1000 = dword: -1000
Bandwidthx1000 = dword: 1000 [HKLM\Software\Sigmatel\APO\GFX\Speaker\plugins\Compressor]
Load = dword: 1
IdEffect = dword: 5
Order = dword: 1150 [HKLM\Software\Sigmatel\APO\GFX\Speaker\presets\_Initial\Compressor] CompRatio= dword: 200
CompAttack= dword: 9910
CompRelease= dword: 9910
CompThreshDb= dword: -600
MakeupGainDb= dword: 200
GateRatio= dword: 600
GateAttack= dword: 9990
GateRelease= dword: 9990
GateThreshDb= dword: -9000
Flags= dword: 8 [HKLM\Software\Sigmatel\APO\GFX\Speaker\plugins\Limiter]
Load = dword: 1
IdEffect = dword: 6
Order = dword: 1155 [HKLM\Software\Sigmatel\APO\GFX\Speaker\presets\_Initial\Limiter] CompRatio= dword: 3700
CompAttack= dword: 9900
CompRelease= dword: 9900
CompThreshDb= dword: 0
MakeupGainDb= dword: 0
GateRatio= dword: 100
GateAttack= dword: 9000
GateRelease= dword: 9000
GateThreshDb= dword: -9000
Flags= dword: 10 [HKLM\SOFTWARE\SigmaTel\STSysTray\1.0\EventExpressions] Version=dword:1 [HKLM\SOFTWARE\SigmaTel\STSysTray\1.0\EventExpressions\JackPresenseD] Action1="if(JackState(13) == 1,(BypassSystemEq(1)),(BypassSystemEq(0)))" Action2="if(JackState(13) == 1,(BypassSystemComp(1)),(BypassSystemComp(0)))" [HKLM\SOFTWARE\Sigmatel\STacGUI]
Config_Tab = dword: 0x8
Config_Spk = dword: 0x0
Config_Adv = dword: 0x01
[HKLM\SOFTWARE\Sigmatel\STacGUI\XML]
Nconfigs = dword: 0x0

here's the output of /proc/asound/card0/codec#0:

Codec: SigmaTel STAC9200
Address: 0
Vendor Id: 0x83847690
Subsystem Id: 0x100
Revision Id: 0x102201
No Modem Function Group found
Default PCM:

    rates [0x7e0]: 44100 48000 88200 96000 176400 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM

Default Amp-In caps: N/A
Default Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1 Node 0x02 [Audio Output] wcaps 0xd0401: Stereo
Power: 0x0
Node 0x03 [Audio Input] wcaps 0x1d0541: Stereo
Power: 0x0
Connection: 1

     0x0a
Node 0x04 [Audio Input] wcaps 0x140311: Stereo Digital
  PCM:
    rates [0x160]: 44100 48000 96000
    bits [0xe]: 16 20 24
    formats [0x5]: PCM AC3
  Connection: 1
     0x08
Node 0x05 [Audio Output] wcaps 0x40211: Stereo Digital
  PCM:
    rates [0x1e0]: 44100 48000 88200 96000
    bits [0xe]: 16 20 24
    formats [0x5]: PCM AC3
Node 0x06 [Vendor Defined Widget] wcaps 0xf30201: Stereo Digital
Node 0x07 [Audio Selector] wcaps 0x300901: Stereo
  Connection: 3
     0x02* 0x08 0x0a

Node 0x08 [Pin Complex] wcaps 0x430681: Stereo Digital
Pincap 0x0810024: IN EAPD Detect
Pin Default 0x400000fe: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
Pin-ctls: 0x00:
Power: 0x0
Node 0x09 [Pin Complex] wcaps 0x400301: Stereo Digital
Pincap 0x0810: OUT
Pin Default 0x00451030: [Jack] SPDIF Out at Ext N/A
Conn = Optical, Color = Black
Pin-ctls: 0x40: OUT
Connection: 2

     0x05* 0x0a

Node 0x0a [Audio Selector] wcaps 0x30090d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1 Amp-Out vals: [0x0d 0x0d]
Connection: 1

     0x0c

Node 0x0b [Audio Selector] wcaps 0x300105: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0x80 0x80]
Connection: 1

     0x07

Node 0x0c [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-Out vals: [0x04 0x04]
Connection: 5

     0x10* 0x0f 0x0e 0x0d 0x12

Node 0x0d [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x083f: IN OUT HP Detect
Pin Default 0x400100f0: [N/A] Line Out at Ext N/A
Conn = 1/8, Color = Unknown
Pin-ctls: 0x00:
Connection: 1

     0x0b

Node 0x0e [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x083f: IN OUT HP Detect
Pin Default 0x90110010: [Fixed] Speaker at Int N/A
Conn = 1/8, Color = Unknown
Pin-ctls: 0x40: OUT
Connection: 1

     0x0b

Node 0x0f [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x0837: IN OUT Detect
Pin Default 0x400100f1: [N/A] Line Out at Ext N/A
Conn = 1/8, Color = Unknown
Pin-ctls: 0x20: IN
Connection: 1

     0x0b

Node 0x10 [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x081737: IN OUT Detect
Pin Default 0x02a1902e: [Jack] Mic at Ext Front
Conn = 1/8, Color = Pink
Pin-ctls: 0x24: IN
Connection: 1

     0x0b

Node 0x11 [Pin Complex] wcaps 0x400104: Mono Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0x00]
Pincap 0x0810: OUT
Pin Default 0x500000f2: [N/A] Line Out at Int N/A
Conn = Unknown, Color = Unknown
Pin-ctls: 0x00:
Connection: 1

     0x13

Node 0x12 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x0820: IN
Pin Default 0x500000f3: [N/A] Line Out at Int N/A
Conn = Unknown, Color = Unknown
Pin-ctls: 0x20: IN
Node 0x13 [Audio Mixer] wcaps 0x200100: Mono
Connection: 1

     0x07

Node 0x14 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
Amp-Out caps: ofs=0x03, nsteps=0x03, stepsize=0x17, mute=1 Amp-Out vals: [0x00]

Thanks for any assistance!
-brian

#1 lore raw

At Tue, 03 Jul 2007 23:08:42 -0400,

Quoted 5 lines · Brian Hinz

This laptop has only an internal speaker, a headphone out, and a mic in (unless there are other outs enabled when the dock is connected). The windows INI seems to be setting some gpio bits but I don't understand how to map the ini syntax into the alsa driver (or if it needs to be...)

Might be needed, but...

Quoted 5 lines

Node 0x0b [Audio Selector] wcaps 0x300105: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0x80 0x80]
Connection: 1

     0x07

You didn't unmute "Master" mixer switch?

Takashi

author
#2 lore raw

Hi Takashi,

Sorry, I recompiled the driver from the hg sources and hadn't re-run alsamixer to unmute. It still doesn't work though - any suggestions?

Thanks,
-brian

Quoted 27 lines

From: Takashi Iwai <[email protected]>
To: "Brian Hinz" <[email protected]>
CC: [email protected]
Subject: Re: [alsa-devel] stac9200 speaker/hp not detected
Date: Wed, 04 Jul 2007 10:43:12 +0200

At Tue, 03 Jul 2007 23:08:42 -0400,

Quoted 4 lines · Brian Hinz

This laptop has only an internal speaker, a headphone out, and a mic in (unless there are other outs enabled when the dock is connected). The windows INI seems to be setting some gpio bits but I don't understand

how to

Quoted 1 line

map the ini syntax into the alsa driver (or if it needs to be...)

Might be needed, but...

Quoted 5 lines

Node 0x0b [Audio Selector] wcaps 0x300105: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0x80 0x80]
Connection: 1

     0x07

You didn't unmute "Master" mixer switch?

Takashi

#3 lore raw

At Wed, 04 Jul 2007 05:25:39 -0400,

Quoted 5 lines · Brian Hinz

Hi Takashi,

Sorry, I recompiled the driver from the hg sources and hadn't re-run alsamixer to unmute. It still doesn't work though - any suggestions?

Attach the latest information, then.

Takashi

Quoted 34 lines

Thanks,
-brian

Quoted 27 lines

From: Takashi Iwai <[email protected]>
To: "Brian Hinz" <[email protected]>
CC: [email protected]
Subject: Re: [alsa-devel] stac9200 speaker/hp not detected
Date: Wed, 04 Jul 2007 10:43:12 +0200

At Tue, 03 Jul 2007 23:08:42 -0400,

Quoted 4 lines · Brian Hinz

This laptop has only an internal speaker, a headphone out, and a mic in (unless there are other outs enabled when the dock is connected). The windows INI seems to be setting some gpio bits but I don't understand

how to

Quoted 1 line

map the ini syntax into the alsa driver (or if it needs to be...)

Might be needed, but...

Quoted 5 lines

Node 0x0b [Audio Selector] wcaps 0x300105: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0x80 0x80]
Connection: 1

     0x07

You didn't unmute "Master" mixer switch?

Takashi

author
#4 lore raw

I found the stac9200 datasheet and went through it, comparing it to the windows ini file and I don't see any obvious issues - everything looks like it's muxed right, except for the fact that there is physically no spdif jack on this particular machine. The GPIO stuff looks like maybe it's mic boost or something, but what are these init verbs?

<snip>
InitVerbs = hex: 0x03, 0xa0, 0x43, 0x01
<snip>

Here's the output from /proc/asound/card0/codec#0:

Codec: SigmaTel STAC9200
Address: 0
Vendor Id: 0x83847690
Subsystem Id: 0x107b0205
Revision Id: 0x102201
No Modem Function Group found
Default PCM:

    rates [0x7e0]: 44100 48000 88200 96000 176400 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM

Default Amp-In caps: N/A
Default Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1 Node 0x02 [Audio Output] wcaps 0xd0401: Stereo
Power: 0x0
Node 0x03 [Audio Input] wcaps 0x1d0541: Stereo
Power: 0x0
Connection: 1

     0x0a
Node 0x04 [Audio Input] wcaps 0x140311: Stereo Digital
  PCM:
    rates [0x160]: 44100 48000 96000
    bits [0xe]: 16 20 24
    formats [0x5]: PCM AC3
  Connection: 1
     0x08
Node 0x05 [Audio Output] wcaps 0x40211: Stereo Digital
  PCM:
    rates [0x1e0]: 44100 48000 88200 96000
    bits [0xe]: 16 20 24
    formats [0x5]: PCM AC3
Node 0x06 [Vendor Defined Widget] wcaps 0xf30201: Stereo Digital
Node 0x07 [Audio Selector] wcaps 0x300901: Stereo
  Connection: 3
     0x02* 0x08 0x0a

Node 0x08 [Pin Complex] wcaps 0x430681: Stereo Digital
Pincap 0x0810024: IN EAPD Detect
Pin Default 0x400000fe: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
Pin-ctls: 0x00:
Power: 0x0
Node 0x09 [Pin Complex] wcaps 0x400301: Stereo Digital
Pincap 0x0810: OUT
Pin Default 0x00451030: [Jack] SPDIF Out at Ext N/A
Conn = Optical, Color = Black
Pin-ctls: 0x40: OUT
Connection: 2

     0x05* 0x0a

Node 0x0a [Audio Selector] wcaps 0x30090d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1 Amp-Out vals: [0x0d 0x0d]
Connection: 1

     0x0c

Node 0x0b [Audio Selector] wcaps 0x300105: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0x1f 0x1f]
Connection: 1

     0x07

Node 0x0c [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-Out vals: [0x04 0x04]
Connection: 5

     0x10* 0x0f 0x0e 0x0d 0x12

Node 0x0d [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x083f: IN OUT HP Detect
Pin Default 0x400100f0: [N/A] Line Out at Ext N/A
Conn = 1/8, Color = Unknown
Pin-ctls: 0x00:
Connection: 1

     0x0b

Node 0x0e [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x083f: IN OUT HP Detect
Pin Default 0x90110010: [Fixed] Speaker at Int N/A
Conn = 1/8, Color = Unknown
Pin-ctls: 0x40: OUT
Connection: 1

     0x0b

Node 0x0f [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x0837: IN OUT Detect
Pin Default 0x400100f1: [N/A] Line Out at Ext N/A
Conn = 1/8, Color = Unknown
Pin-ctls: 0x20: IN
Connection: 1

     0x0b

Node 0x10 [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x081737: IN OUT Detect
Pin Default 0x02a1902e: [Jack] Mic at Ext Front
Conn = 1/8, Color = Pink
Pin-ctls: 0x24: IN
Connection: 1

     0x0b

Node 0x11 [Pin Complex] wcaps 0x400104: Mono Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0x00]
Pincap 0x0810: OUT
Pin Default 0x500000f2: [N/A] Line Out at Int N/A
Conn = Unknown, Color = Unknown
Pin-ctls: 0x00:
Connection: 1

     0x13

Node 0x12 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x0820: IN
Pin Default 0x500000f3: [N/A] Line Out at Int N/A
Conn = Unknown, Color = Unknown
Pin-ctls: 0x20: IN
Node 0x13 [Audio Mixer] wcaps 0x200100: Mono
Connection: 1

     0x07

Node 0x14 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
Amp-Out caps: ofs=0x03, nsteps=0x03, stepsize=0x17, mute=1 Amp-Out vals: [0x00]

dmesg:

[  493.668000] ALSA 
/home/bphinz/alsa/alsa-hg/alsa-driver/pci/hda/hda_codec.c:1810: hda_codec: 
model 'm4' is selected
[  493.668000] ALSA 
/home/bphinz/alsa/alsa-hg/alsa-driver/pci/hda/hda_codec.c:2339: autoconfig: 
line_outs=1 (0xe/0x0/0x0/0x0/0x0)
[  493.668000] ALSA 
/home/bphinz/alsa/alsa-hg/alsa-driver/pci/hda/hda_codec.c:2343:    
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[  493.668000] ALSA 
/home/bphinz/alsa/alsa-hg/alsa-driver/pci/hda/hda_codec.c:2347:    hp_outs=0 
(0x0/0x0/0x0/0x0/0x0)
[  493.668000] ALSA 
/home/bphinz/alsa/alsa-hg/alsa-driver/pci/hda/hda_codec.c:2355:    inputs: 
mic=0x0, fmic=0x10, line=0x0, fline=0x0, cd=0x0, aux=0x0
[  493.796000] ALSA 
/home/bphinz/alsa/alsa-hg/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/patch_si3054.c:244: 
si3054: cannot initialize. EXT MID = 0000
[  493.796000] ALSA 

/home/bphinz/alsa/alsa-hg/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/patch_si3054.c:256:
Link Frame Detect(FDT) is not ready (line status: 0000)

Thanks,
-brian

Quoted 56 lines

From: Takashi Iwai <[email protected]>
To: "Brian Hinz" <[email protected]>
CC: [email protected]
Subject: Re: [alsa-devel] stac9200 speaker/hp not detected
Date: Wed, 04 Jul 2007 11:27:56 +0200

At Wed, 04 Jul 2007 05:25:39 -0400,

Quoted 5 lines · Brian Hinz

Hi Takashi,

Sorry, I recompiled the driver from the hg sources and hadn't re-run alsamixer to unmute. It still doesn't work though - any suggestions?

Attach the latest information, then.

Takashi

Quoted 15 lines

Thanks,
-brian

Quoted 10 lines

From: Takashi Iwai <[email protected]>
To: "Brian Hinz" <[email protected]>
CC: [email protected]
Subject: Re: [alsa-devel] stac9200 speaker/hp not detected
Date: Wed, 04 Jul 2007 10:43:12 +0200

At Tue, 03 Jul 2007 23:08:42 -0400,

Quoted 2 lines · Brian Hinz

This laptop has only an internal speaker, a headphone out, and a mic

in

Quoted 1 line
Quoted 1 line
Quoted 1 line

(unless there are other outs enabled when the dock is connected).

The

Quoted 1 line
Quoted 1 line
Quoted 1 line

windows INI seems to be setting some gpio bits but I don't

understand

Quoted 17 lines
Quoted 15 lines

how to

Quoted 1 line

map the ini syntax into the alsa driver (or if it needs to be...)

Might be needed, but...

Quoted 5 lines

Node 0x0b [Audio Selector] wcaps 0x300105: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0x80 0x80]
Connection: 1

     0x07

You didn't unmute "Master" mixer switch?

Takashi

#5 lore raw

At Wed, 04 Jul 2007 15:08:15 -0400,

Quoted 6 lines · Brian Hinz

I found the stac9200 datasheet and went through it, comparing it to the windows ini file and I don't see any obvious issues - everything looks like it's muxed right, except for the fact that there is physically no spdif jack on this particular machine. The GPIO stuff looks like maybe it's mic boost or something, but what are these init verbs?

GPIO can be used for different purposes depending on the implementation. But, I'm not sure whether the missing GPIO setup is the culprit or not. Anyway, you can set spec->gpio_mute in patch_9200().

If it doesn't help, try to change the pin config. You can ignore the first two pins for 0x08 and 0x09, which are for SPDIF I/O. The rest are analog pins and can be configured flexibly. The value 0x90110010 corresponds to a built-in speaker, for example.

Takashi

Quoted 208 lines

<snip>
InitVerbs = hex: 0x03, 0xa0, 0x43, 0x01
<snip>

Here's the output from /proc/asound/card0/codec#0:

Codec: SigmaTel STAC9200
Address: 0
Vendor Id: 0x83847690
Subsystem Id: 0x107b0205
Revision Id: 0x102201
No Modem Function Group found
Default PCM:

    rates [0x7e0]: 44100 48000 88200 96000 176400 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM

Default Amp-In caps: N/A
Default Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1 Node 0x02 [Audio Output] wcaps 0xd0401: Stereo
Power: 0x0
Node 0x03 [Audio Input] wcaps 0x1d0541: Stereo
Power: 0x0
Connection: 1

     0x0a
Node 0x04 [Audio Input] wcaps 0x140311: Stereo Digital
  PCM:
    rates [0x160]: 44100 48000 96000
    bits [0xe]: 16 20 24
    formats [0x5]: PCM AC3
  Connection: 1
     0x08
Node 0x05 [Audio Output] wcaps 0x40211: Stereo Digital
  PCM:
    rates [0x1e0]: 44100 48000 88200 96000
    bits [0xe]: 16 20 24
    formats [0x5]: PCM AC3
Node 0x06 [Vendor Defined Widget] wcaps 0xf30201: Stereo Digital
Node 0x07 [Audio Selector] wcaps 0x300901: Stereo
  Connection: 3
     0x02* 0x08 0x0a

Node 0x08 [Pin Complex] wcaps 0x430681: Stereo Digital
Pincap 0x0810024: IN EAPD Detect
Pin Default 0x400000fe: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
Pin-ctls: 0x00:
Power: 0x0
Node 0x09 [Pin Complex] wcaps 0x400301: Stereo Digital
Pincap 0x0810: OUT
Pin Default 0x00451030: [Jack] SPDIF Out at Ext N/A
Conn = Optical, Color = Black
Pin-ctls: 0x40: OUT
Connection: 2

     0x05* 0x0a

Node 0x0a [Audio Selector] wcaps 0x30090d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1 Amp-Out vals: [0x0d 0x0d]
Connection: 1

     0x0c

Node 0x0b [Audio Selector] wcaps 0x300105: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0x1f 0x1f]
Connection: 1

     0x07

Node 0x0c [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-Out vals: [0x04 0x04]
Connection: 5

     0x10* 0x0f 0x0e 0x0d 0x12

Node 0x0d [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x083f: IN OUT HP Detect
Pin Default 0x400100f0: [N/A] Line Out at Ext N/A
Conn = 1/8, Color = Unknown
Pin-ctls: 0x00:
Connection: 1

     0x0b

Node 0x0e [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x083f: IN OUT HP Detect
Pin Default 0x90110010: [Fixed] Speaker at Int N/A
Conn = 1/8, Color = Unknown
Pin-ctls: 0x40: OUT
Connection: 1

     0x0b

Node 0x0f [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x0837: IN OUT Detect
Pin Default 0x400100f1: [N/A] Line Out at Ext N/A
Conn = 1/8, Color = Unknown
Pin-ctls: 0x20: IN
Connection: 1

     0x0b

Node 0x10 [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x081737: IN OUT Detect
Pin Default 0x02a1902e: [Jack] Mic at Ext Front
Conn = 1/8, Color = Pink
Pin-ctls: 0x24: IN
Connection: 1

     0x0b

Node 0x11 [Pin Complex] wcaps 0x400104: Mono Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0x00]
Pincap 0x0810: OUT
Pin Default 0x500000f2: [N/A] Line Out at Int N/A
Conn = Unknown, Color = Unknown
Pin-ctls: 0x00:
Connection: 1

     0x13

Node 0x12 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x0820: IN
Pin Default 0x500000f3: [N/A] Line Out at Int N/A
Conn = Unknown, Color = Unknown
Pin-ctls: 0x20: IN
Node 0x13 [Audio Mixer] wcaps 0x200100: Mono
Connection: 1

     0x07

Node 0x14 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
Amp-Out caps: ofs=0x03, nsteps=0x03, stepsize=0x17, mute=1 Amp-Out vals: [0x00]

dmesg:

[  493.668000] ALSA 
/home/bphinz/alsa/alsa-hg/alsa-driver/pci/hda/hda_codec.c:1810: hda_codec: 
model 'm4' is selected
[  493.668000] ALSA 
/home/bphinz/alsa/alsa-hg/alsa-driver/pci/hda/hda_codec.c:2339: autoconfig: 
line_outs=1 (0xe/0x0/0x0/0x0/0x0)
[  493.668000] ALSA 
/home/bphinz/alsa/alsa-hg/alsa-driver/pci/hda/hda_codec.c:2343:    
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[  493.668000] ALSA 
/home/bphinz/alsa/alsa-hg/alsa-driver/pci/hda/hda_codec.c:2347:    hp_outs=0 
(0x0/0x0/0x0/0x0/0x0)
[  493.668000] ALSA 
/home/bphinz/alsa/alsa-hg/alsa-driver/pci/hda/hda_codec.c:2355:    inputs: 
mic=0x0, fmic=0x10, line=0x0, fline=0x0, cd=0x0, aux=0x0
[  493.796000] ALSA 
/home/bphinz/alsa/alsa-hg/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/patch_si3054.c:244: 
si3054: cannot initialize. EXT MID = 0000
[  493.796000] ALSA 

/home/bphinz/alsa/alsa-hg/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/patch_si3054.c:256:
Link Frame Detect(FDT) is not ready (line status: 0000)

Thanks,
-brian

Quoted 33 lines

From: Takashi Iwai <[email protected]>
To: "Brian Hinz" <[email protected]>
CC: [email protected]
Subject: Re: [alsa-devel] stac9200 speaker/hp not detected
Date: Wed, 04 Jul 2007 11:27:56 +0200

At Wed, 04 Jul 2007 05:25:39 -0400,

Quoted 5 lines · Brian Hinz

Hi Takashi,

Sorry, I recompiled the driver from the hg sources and hadn't re-run alsamixer to unmute. It still doesn't work though - any suggestions?

Attach the latest information, then.

Takashi

Quoted 14 lines

Thanks,
-brian

Quoted 9 lines

From: Takashi Iwai <[email protected]>
To: "Brian Hinz" <[email protected]>
CC: [email protected]
Subject: Re: [alsa-devel] stac9200 speaker/hp not detected
Date: Wed, 04 Jul 2007 10:43:12 +0200

At Tue, 03 Jul 2007 23:08:42 -0400,

Quoted 1 line · Brian Hinz
Quoted 23 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line

This laptop has only an internal speaker, a headphone out, and a mic

in

Quoted 1 line
Quoted 1 line
Quoted 1 line

(unless there are other outs enabled when the dock is connected).

The

Quoted 1 line
Quoted 1 line
Quoted 1 line

windows INI seems to be setting some gpio bits but I don't

understand

Quoted 17 lines
Quoted 15 lines

how to

Quoted 1 line

map the ini syntax into the alsa driver (or if it needs to be...)

Might be needed, but...

Quoted 5 lines

Node 0x0b [Audio Selector] wcaps 0x300105: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0x80 0x80]
Connection: 1

     0x07

You didn't unmute "Master" mixer switch?

Takashi

_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

author
#6 lore raw

OK, after a few days of familiarizing myself with the hda and stac9200 specs, I think I see what's going on. I tossed out the pin config settings from the windows driver and simply derived a set based on the stac9200 datasheet and my best guesses as to how the hardware is actually configured.
At this point, dmesg shows:

line_outs=0 (0x0/0x0/0x0/0x0/0x0)
speaker_outs=1 (0xe/0x0/0x0/0x0/0x0)
hp_outs=1 (0xd/0x0/0x0/0x0/0x0)
inputs: mic=0x10, fmic=0x0, line=0x0, fline=0x0, cd=0x0, aux=0x0

which corresponds at least to the number of external ports. Still no sound, BUT, /proc/asound/card0/codec#0 shows something interesting (heh, actually it's shown it all along, ignorance is bliss I guess...):

...
Node 0x08 [Pin Complex] wcaps 0x430681: Stereo Digital
Pincap 0x0810024: IN EAPD Detect
Pin Default 0x40c001fd: [N/A] SPDIF In at Ext N/A
Conn = Unknown, Color = Unknown
Pin-ctls: 0x00:
Power: 0x0
...

the DigInPin is showing EAPD control. I wasn't sure about the meaning of the "Power: 0x0" line in /proc/asound/card0/codec#0 so I put some debug statements into patch_sigmatel.c to dump the DigInPin power state and EAPD registers:

[ 5701.644000] hda_codec: DigInPin PwrState: 00000033
[ 5701.644000] hda_codec: EAPD Config: 00000000

According to the stac9200 datasheet, a PwrState of 0x3 means that the node is powered down. A value of 0 on the EAPD pin means power down the external amp, and a 1 means power up the amp if PwrState is < 0x2. If PwrState >= 0x2, Pin47 is tri-stated. And Pin47 is ... GPIO3 (AKA: SPDIF_IN, EAPD)! The stac9200 datasheet also states that "an external pull-down is required if EAPD must be low when Pin Widget is powered down."

So I assume that I need to reconfigure this pin to drive a 1 and power up the external amp, but what is the correct way to do this? Does the pin config matter much, or do I just need to set the PwrState bits? I see that in stac92xx_enable_eapd GPIO0 is configured as CMOS before it's enabled. Since GPIO3 is a digital I/O I obviously don't have to do that. Any suggestions before I take the red pill?

Attached is my latest /proc/asound/card0/codec#0

Thanks,
-brian

Codec: SigmaTel STAC9200
Address: 0
Vendor Id: 0x83847690
Subsystem Id: 0x107b0205
Revision Id: 0x102201
No Modem Function Group found
Default PCM:

    rates [0x7e0]: 44100 48000 88200 96000 176400 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM

Default Amp-In caps: N/A
Default Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1 Node 0x02 [Audio Output] wcaps 0xd0401: Stereo
Power: 0x0
Node 0x03 [Audio Input] wcaps 0x1d0541: Stereo
Power: 0x0
Connection: 1

     0x0a
Node 0x04 [Audio Input] wcaps 0x140311: Stereo Digital
  PCM:
    rates [0x160]: 44100 48000 96000
    bits [0xe]: 16 20 24
    formats [0x5]: PCM AC3
  Connection: 1
     0x08
Node 0x05 [Audio Output] wcaps 0x40211: Stereo Digital
  PCM:
    rates [0x1e0]: 44100 48000 88200 96000
    bits [0xe]: 16 20 24
    formats [0x5]: PCM AC3
Node 0x06 [Vendor Defined Widget] wcaps 0xf30201: Stereo Digital
Node 0x07 [Audio Selector] wcaps 0x300901: Stereo
  Connection: 3
     0x02* 0x08 0x0a

Node 0x08 [Pin Complex] wcaps 0x430681: Stereo Digital
Pincap 0x0810024: IN EAPD Detect
Pin Default 0x40c001fd: [N/A] SPDIF In at Ext N/A
Conn = Unknown, Color = Unknown
Pin-ctls: 0x00:
Power: 0x0
Node 0x09 [Pin Complex] wcaps 0x400301: Stereo Digital
Pincap 0x0810: OUT
Pin Default 0x404001fe: [N/A] SPDIF Out at Ext N/A
Conn = Unknown, Color = Unknown
Pin-ctls: 0x00:
Connection: 2

     0x05* 0x0a

Node 0x0a [Audio Selector] wcaps 0x30090d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1 Amp-Out vals: [0x0d 0x0d]
Connection: 1

     0x0c

Node 0x0b [Audio Selector] wcaps 0x300105: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0x1f 0x1f]
Connection: 1

     0x07

Node 0x0c [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-Out vals: [0x04 0x04]
Connection: 5

     0x10* 0x0f 0x0e 0x0d 0x12

Node 0x0d [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x083f: IN OUT HP Detect
Pin Default 0x042110f1: [Jack] HP Out at Ext Right
Conn = 1/8, Color = Black
Pin-ctls: 0xc0: OUT HP
Connection: 1

     0x0b

Node 0x0e [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x083f: IN OUT HP Detect
Pin Default 0x90100110: [Fixed] Speaker at Int N/A
Conn = Unknown, Color = Unknown
Pin-ctls: 0x00:
Connection: 1

     0x0b

Node 0x0f [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x0837: IN OUT Detect
Pin Default 0x400101ff: [N/A] Line Out at Ext N/A
Conn = 1/8, Color = Unknown
Pin-ctls: 0x20: IN
Connection: 1

     0x0b

Node 0x10 [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x081737: IN OUT Detect
Pin Default 0x04a110f2: [Jack] Mic at Ext Right
Conn = 1/8, Color = Black
Pin-ctls: 0x24: IN
Connection: 1

     0x0b

Node 0x11 [Pin Complex] wcaps 0x400104: Mono Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0x00]
Pincap 0x0810: OUT
Pin Default 0x401001f3: [N/A] Speaker at Ext N/A
Conn = Unknown, Color = Unknown
Pin-ctls: 0x00:
Connection: 1

     0x13

Node 0x12 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x0820: IN
Pin Default 0x409001f4: [N/A] Aux at Ext N/A
Conn = Unknown, Color = Unknown
Pin-ctls: 0x20: IN
Node 0x13 [Audio Mixer] wcaps 0x200100: Mono
Connection: 1

     0x07

Node 0x14 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
Amp-Out caps: ofs=0x03, nsteps=0x03, stepsize=0x17, mute=1 Amp-Out vals: [0x00]

Quoted 30 lines

From: Takashi Iwai <[email protected]>
To: "Brian Hinz" <[email protected]>
CC: [email protected]
Subject: Re: [alsa-devel] stac9200 speaker/hp not detected
Date: Thu, 05 Jul 2007 12:28:56 +0200

At Wed, 04 Jul 2007 15:08:15 -0400,

Quoted 3 lines · Brian Hinz

I found the stac9200 datasheet and went through it, comparing it to the windows ini file and I don't see any obvious issues - everything looks

like

Quoted 1 line

it's muxed right, except for the fact that there is physically no spdif

jack

Quoted 1 line

on this particular machine. The GPIO stuff looks like maybe it's mic

boost

Quoted 1 line

or something, but what are these init verbs?

GPIO can be used for different purposes depending on the implementation. But, I'm not sure whether the missing GPIO setup is the culprit or not. Anyway, you can set spec->gpio_mute in patch_9200().

If it doesn't help, try to change the pin config. You can ignore the first two pins for 0x08 and 0x09, which are for SPDIF I/O. The rest are analog pins and can be configured flexibly. The value 0x90110010 corresponds to a built-in speaker, for example.

Takashi

#7 lore raw

At Sun, 08 Jul 2007 12:54:54 -0400,

Quoted 25 lines · Brian Hinz

OK, after a few days of familiarizing myself with the hda and stac9200 specs, I think I see what's going on. I tossed out the pin config settings from the windows driver and simply derived a set based on the stac9200 datasheet and my best guesses as to how the hardware is actually configured.
At this point, dmesg shows:

line_outs=0 (0x0/0x0/0x0/0x0/0x0)
speaker_outs=1 (0xe/0x0/0x0/0x0/0x0)
hp_outs=1 (0xd/0x0/0x0/0x0/0x0)
inputs: mic=0x10, fmic=0x0, line=0x0, fline=0x0, cd=0x0, aux=0x0

which corresponds at least to the number of external ports. Still no sound, BUT, /proc/asound/card0/codec#0 shows something interesting (heh, actually it's shown it all along, ignorance is bliss I guess...):

...
Node 0x08 [Pin Complex] wcaps 0x430681: Stereo Digital
Pincap 0x0810024: IN EAPD Detect
Pin Default 0x40c001fd: [N/A] SPDIF In at Ext N/A
Conn = Unknown, Color = Unknown
Pin-ctls: 0x00:
Power: 0x0
...

Quoted 6 lines

the DigInPin is showing EAPD control. I wasn't sure about the meaning of the "Power: 0x0" line in /proc/asound/card0/codec#0 so I put some debug statements into patch_sigmatel.c to dump the DigInPin power state and EAPD registers:

[ 5701.644000] hda_codec: DigInPin PwrState: 00000033

Hm, how can it be? The proc file shows it's 0 (= all power-on), and you see a different value?

Quoted 8 lines
[ 5701.644000] hda_codec: EAPD Config: 00000000

According to the stac9200 datasheet, a PwrState of 0x3 means that the node is powered down. A value of 0 on the EAPD pin means power down the external amp, and a 1 means power up the amp if PwrState is < 0x2. If PwrState >= 0x2, Pin47 is tri-stated. And Pin47 is ... GPIO3 (AKA: SPDIF_IN, EAPD)! The stac9200 datasheet also states that "an external pull-down is required if EAPD must be low when Pin Widget is powered down."

I'm a bit skeptical about this relation. SPDIF-IN was used for the EAPD control on many boards with ac97 codecs, but EAPD is usually controlled via AC_VERB_SET_EAPD_BTLENABLE verb to the specific pin widget on HD-audio codecs. GPIO may be required for some weird setting, but it's nowhere defined in the datasheet.

BTW, how did you find out that the HP pin is 0x0d and the speaker is 0x0e?

Takashi