Skip to contentSkip to conversation

snd-opti92x-ad1848

DISCUSSION Andrei Boros 2 participants 5 messages Oct 15, 2003 – Oct 17, 2003 1 message not in the archive

lore
Share & tools
lore
#0 lore raw

Attempting again at opti92x-ad1848 build from cvs tree taken today :

compilation goes well (all components of alsa).

./configure --with-isapnp=yes --with-sequencer=yes --with-oss=yes --with-debug=detect --with-cards=cs46xx,opti92x-ad1848 make
make install
depmod -a
(depmod returns no unresolved symbols)

gate:~# modprobe snd-opti92x-ad1848
/lib/modules/2.2.24/misc/snd-hwdep.o: unresolved symbol
snd_register_oss_device_Rddc5e1d2
/lib/modules/2.2.24/misc/snd-hwdep.o: unresolved symbol
snd_info_register_Rfccceac3
/lib/modules/2.2.24/misc/snd-hwdep.o: unresolved symbol
snd_unregister_oss_device_Rab87d9aa
/lib/modules/2.2.24/misc/snd-hwdep.o: unresolved symbol
snd_info_create_module_entry_Rd13be217
/lib/modules/2.2.24/misc/snd-hwdep.o: unresolved symbol
snd_ctl_register_ioctl_Rf18647ae
/lib/modules/2.2.24/misc/snd-hwdep.o: unresolved symbol
snd_ctl_unregister_ioctl_R7ca01faa
/lib/modules/2.2.24/misc/snd-hwdep.o: unresolved symbol
snd_unregister_device_R15d14211
/lib/modules/2.2.24/misc/snd-hwdep.o: unresolved symbol
snd_device_new_R4b610fa9
/lib/modules/2.2.24/misc/snd-hwdep.o: unresolved symbol
snd_register_device_Rb4cb86ab
/lib/modules/2.2.24/misc/snd-hwdep.o: unresolved symbol
snd_info_unregister_Reeb79eb0
/lib/modules/2.2.24/misc/snd-hwdep.o: unresolved symbol
snd_card_file_remove_Rcf50c6bd
/lib/modules/2.2.24/misc/snd-hwdep.o: unresolved symbol
snd_card_file_add_Rbb7360e0
/lib/modules/2.2.24/misc/snd-hwdep.o: unresolved symbol
snd_info_free_entry_R1e9a962a
snd: Device or resource busy
snd-timer: Device or resource busy
snd-mpu401-uart: No such file or directory

File snd-mpu401-uart.o exists

Quoted 1 line

From the modules loaded, I see there is a snd-ac97-codec, but it makes

no sense, since the Opti924 is an old ISA card where ac97 didn't even exist...

Signature · 11 lines
ing. Andrei Boros
mailto:[email protected] / +40-21-303-1870
Centrul pt. Tehnologia Informatiei
Societatea Romana de Radiodifuziune


-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program.
SourceForge.net hosts over 70,000 Open Source Projects.
See the people who have HELPED US provide better services:
Click here: http://sourceforge.net/supporters.php
#1 lore raw

At Wed, 15 Oct 2003 13:07:22 +0300,

Quoted 12 lines · Andrei Boros

Attempting again at opti92x-ad1848 build from cvs tree taken today :

compilation goes well (all components of alsa).

./configure --with-isapnp=yes --with-sequencer=yes --with-oss=yes --with-debug=detect --with-cards=cs46xx,opti92x-ad1848 make
make install
depmod -a
(depmod returns no unresolved symbols)

Quoted 3 lines
gate:~# modprobe snd-opti92x-ad1848
/lib/modules/2.2.24/misc/snd-hwdep.o: unresolved symbol
snd_register_oss_device_Rddc5e1d2

there has been no change about the version symbols in the ALSA codes for very long time.
did you run make clean ?

Takashi

-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program. SourceForge.net hosts over 70,000 Open Source Projects. See the people who have HELPED US provide better services:
Click here: http://sourceforge.net/supporters.php

A message that is not in the archive (sent off-list or not yet received): [email protected]

#3 lore raw

At Wed, 15 Oct 2003 14:05:27 +0300,

Quoted 31 lines · Andrei Boros
Quoted 15 lines · Takashi Iwai

At Wed, 15 Oct 2003 13:07:22 +0300,

Quoted 12 lines · Andrei Boros

Attempting again at opti92x-ad1848 build from cvs tree taken today :

compilation goes well (all components of alsa).

./configure --with-isapnp=yes --with-sequencer=yes --with-oss=yes --with-debug=detect --with-cards=cs46xx,opti92x-ad1848 make
make install
depmod -a
(depmod returns no unresolved symbols)

Quoted 7 lines
Quoted 3 lines
gate:~# modprobe snd-opti92x-ad1848
/lib/modules/2.2.24/misc/snd-hwdep.o: unresolved symbol
snd_register_oss_device_Rddc5e1d2

there has been no change about the version symbols in the ALSA codes for very long time.
did you run make clean ?

Actually I erased the entire alsa-driver, alsa-kernel and alsa-oss directories and get a fresh, clean copy with cvs just before I did the above.

Quoted 7 lines

Ok, I am rechecking my steps.
- Delete alsa-driver, alsa-kernel, alsa-oss directories.
- also /lib/modules/2.2.24/misc/snd*.o
- getting latest with cvs
- in alsa-driver, cvscompile. I stop it when it gets to the configure stage so I can give coonfigure my set of parameters.
- make

unload all ALSA (and isapnp, pnp) modules before the following.

Quoted 11 lines

- make install
- depmod -a
- modprobe ....

Odd, i get only one unresolved symbol now (now I also deleted alsa-oss, which i did not before.
ok, here it is :

gate:~/install/alsa-cvs/alsa-driver# modprobe snd-opti92x-ad1848
/lib/modules/2.2.24/misc/snd-opti92x-ad1848.o: unresolved symbol
isapnp_resource_change_R09b965af
snd: Device or resource busy

it must be the old isapnp module which wasn't unloaded.

Takashi

-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program. SourceForge.net hosts over 70,000 Open Source Projects. See the people who have HELPED US provide better services:
Click here: http://sourceforge.net/supporters.php

#4 lore raw
Quoted 5 lines

unload all ALSA (and isapnp, pnp) modules before the following.

it must be the old isapnp module which wasn't unloaded.

I checked that no sound related modules are loaded. I removed snd*.o from the /lib/modules...
I did make install, depmod -a

My /etc/modules.conf reads :

alias char-major-116            snd
options snd                     cards_limit=2
alias snd-card-0                snd-cs46xx
alias snd-card-1                snd-opti92x-ad1848
options snd-opti-92x-ad1848     index=1 isapnp=1 id="Opti924" port=0x220

irq=5 dma1=0 fm_port=0x388 mpu_port=0x300 mpu_irq=7

(i also have a hercules fortissimo 2, the cs46xx which works fine)

So now I am sure no sound related modules are loaded. modprobe snd-opti92x-ad1848 says /lib/modules/2.2.24/misc/snd-opti92x-ad1848.o: unresolved symbol isapnp_resource_change_R09b965af
snd: Device or resource busy

I see that snd-isapnp is not loaded

Again, I unload _all_ modules.
I do modprobe snd-isapnp by hand
dmesg

isapnp: Card 'OPTi Audio 16'
isapnp: 1 Plug & Play card detected total

below is the contents of /proc/isapnp

gate:~# modprobe snd-opti92x-ad1848
/lib/modules/2.2.24/misc/snd-opti92x-ad1848.o: init_module: Device or
resource busy
snd: Device or resource busy

I take a look at the /proc/isapnp and I see that the device did not get enabled

At this point I am out of ideas...

Card 1 'OPT0924:OPTi Audio 16' PnP version 1.0
Logical device 0 'OPT0000:Pro Audio 16'

    Device is not active
    Active port 0x220
    Resources 0
      Priority preferred
      Port 0x220-0x240, align 0x1f, size 0x10, 10-bit address decoding
      Port 0x130-0x3f0, align 0x3, size 0x8, 10-bit address decoding
    Resources 1
      Priority acceptable
      Port 0x380-0x380, align 0xf, size 0xc, 10-bit address decoding
      IRQ 5,7,10 High-Edge
      DMA 0,1,3 8-bit compatible
      Alternate resources 1:1
        Priority acceptable
        Port 0x380-0x3f0, align 0xf, size 0xc, 10-bit address decoding
        IRQ 5,7,2/9,10,11 High-Edge
        DMA 0,1,3 8-bit compatible
        DMA 0,1,3 8-bit compatible
  Logical device 1 'OPT0001:Game Port'
    Compatible device PNPb02f
    Device is not active
    Resources 0
      Priority acceptable
      Port 0x201-0x201, align 0x0, size 0x1, 10-bit address decoding
      Alternate resources 0:1
        Priority acceptable
        Port 0x100-0x3f0, align 0xf, size 0x2, 10-bit address decoding
  Logical device 2 'OPT0002:MPU401'
    Device is not active
    Active port 0x300
    Active IRQ 9 [0x2]
    Resources 0
      Priority preferred
      Port 0x300-0x330, align 0xf, size 0x2, 10-bit address decoding
      IRQ 5,7,2/9,10 High-Edge
  Logical device 3 'OPT0003:CD'
    Compatible device PNP0600
    Device is active
    Active port 0x376,0x170
    Active IRQ 15 [0x2]
    Resources 0
      Priority preferred
      IRQ 15 High-Edge
    Resources 1
      Priority acceptable
      Port 0x376-0x376, align 0xf, size 0x2, 10-bit address decoding
      Port 0x170-0x170, align 0xf, size 0x8, 10-bit address decoding
      Alternate resources 1:1
        Priority acceptable
        Port 0x376-0x3f6, align 0xf, size 0x2, 10-bit address decoding
        Port 0x170-0x3f0, align 0xf, size 0x8, 10-bit address decoding
  Logical device 4 'OPT0004:Modem'
    Compatible device PNP0500
    Device is not active
    Resources 0
      Priority preferred
      IRQ 3,4,5,7,2/9,10,11 High-Edge
    Resources 1
      Priority acceptable
      Port 0x2e8-0x2f8, align 0xf, size 0x8, 10-bit address decoding
      Alternate resources 1:1
        Priority acceptable
        Port 0x3e8-0x3f8, align 0xf, size 0x8, 10-bit address decoding
      Alternate resources 1:2
        Priority acceptable
        Port 0x100-0x3f0, align 0xf, size 0x8, 10-bit address decoding
  Logical device 5 'OPT0005:OPT924'
    Device is not active
    Active port 0x30d
    Resources 0
      Priority preferred
      Port 0x30d-0x3ed, align 0x1f, size 0x9, 10-bit address decoding
    Resources 1
      Priority acceptable
      IRQ 5,10,11 High-Edge
Signature · 11 lines
ing. Andrei Boros
mailto:[email protected] / +40-21-303-1870
Centrul pt. Tehnologia Informatiei
Societatea Romana de Radiodifuziune


-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program.
SourceForge.net hosts over 70,000 Open Source Projects.
See the people who have HELPED US provide better services:
Click here: http://sourceforge.net/supporters.php
#5 lore raw

At Thu, 16 Oct 2003 09:48:02 +0300,

Quoted 37 lines · Andrei Boros
Quoted 6 lines

unload all ALSA (and isapnp, pnp) modules before the following.

it must be the old isapnp module which wasn't unloaded.

I checked that no sound related modules are loaded. I removed snd*.o from the /lib/modules...
I did make install, depmod -a

My /etc/modules.conf reads :

alias char-major-116            snd
options snd                     cards_limit=2
alias snd-card-0                snd-cs46xx
alias snd-card-1                snd-opti92x-ad1848
options snd-opti-92x-ad1848     index=1 isapnp=1 id="Opti924" port=0x220

irq=5 dma1=0 fm_port=0x388 mpu_port=0x300 mpu_irq=7

(i also have a hercules fortissimo 2, the cs46xx which works fine)

So now I am sure no sound related modules are loaded. modprobe snd-opti92x-ad1848 says /lib/modules/2.2.24/misc/snd-opti92x-ad1848.o: unresolved symbol isapnp_resource_change_R09b965af
snd: Device or resource busy

I see that snd-isapnp is not loaded

Again, I unload _all_ modules.
I do modprobe snd-isapnp by hand
dmesg

isapnp: Card 'OPTi Audio 16'
isapnp: 1 Plug & Play card detected total

below is the contents of /proc/isapnp

Quoted 7 lines
gate:~# modprobe snd-opti92x-ad1848
/lib/modules/2.2.24/misc/snd-opti92x-ad1848.o: init_module: Device or
resource busy
snd: Device or resource busy

I take a look at the /proc/isapnp and I see that the device did not get enabled

the devices are activated by the alsa driver. so it's ok. the problem is that the detection of device failed by some reason.

Takashi

-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program. SourceForge.net hosts over 70,000 Open Source Projects. See the people who have HELPED US provide better services:
Click here: http://sourceforge.net/supporters.php