snd-opti92x-ad1848
Attempting again at opti92x-ad1848 build from cvs tree taken today :
compilation goes well (all components of alsa).
./configure --with-isapnp=yes --with-sequencer=yes --with-oss=yes --with-debug=detect --with-cards=cs46xx,opti92x-ad1848 make
make install
depmod -a
(depmod returns no unresolved symbols)
gate:~# modprobe snd-opti92x-ad1848 /lib/modules/2.2.24/misc/snd-hwdep.o: unresolved symbol snd_register_oss_device_Rddc5e1d2 /lib/modules/2.2.24/misc/snd-hwdep.o: unresolved symbol snd_info_register_Rfccceac3 /lib/modules/2.2.24/misc/snd-hwdep.o: unresolved symbol snd_unregister_oss_device_Rab87d9aa /lib/modules/2.2.24/misc/snd-hwdep.o: unresolved symbol snd_info_create_module_entry_Rd13be217 /lib/modules/2.2.24/misc/snd-hwdep.o: unresolved symbol snd_ctl_register_ioctl_Rf18647ae /lib/modules/2.2.24/misc/snd-hwdep.o: unresolved symbol snd_ctl_unregister_ioctl_R7ca01faa /lib/modules/2.2.24/misc/snd-hwdep.o: unresolved symbol snd_unregister_device_R15d14211 /lib/modules/2.2.24/misc/snd-hwdep.o: unresolved symbol snd_device_new_R4b610fa9 /lib/modules/2.2.24/misc/snd-hwdep.o: unresolved symbol snd_register_device_Rb4cb86ab /lib/modules/2.2.24/misc/snd-hwdep.o: unresolved symbol snd_info_unregister_Reeb79eb0 /lib/modules/2.2.24/misc/snd-hwdep.o: unresolved symbol snd_card_file_remove_Rcf50c6bd /lib/modules/2.2.24/misc/snd-hwdep.o: unresolved symbol snd_card_file_add_Rbb7360e0 /lib/modules/2.2.24/misc/snd-hwdep.o: unresolved symbol snd_info_free_entry_R1e9a962a snd: Device or resource busy snd-timer: Device or resource busy snd-mpu401-uart: No such file or directory
File snd-mpu401-uart.o exists
Quoted 1 line
From the modules loaded, I see there is a snd-ac97-codec, but it makes
no sense, since the Opti924 is an old ISA card where ac97 didn't even exist...
Signature · 11 lines
ing. Andrei Boros mailto:[email protected] / +40-21-303-1870 Centrul pt. Tehnologia Informatiei Societatea Romana de Radiodifuziune ------------------------------------------------------- This SF.net email is sponsored by: SF.net Giveback Program. SourceForge.net hosts over 70,000 Open Source Projects. See the people who have HELPED US provide better services: Click here: http://sourceforge.net/supporters.php
At Wed, 15 Oct 2003 13:07:22 +0300,
Quoted 12 lines · Andrei Boros
Attempting again at opti92x-ad1848 build from cvs tree taken today :
compilation goes well (all components of alsa).
./configure --with-isapnp=yes --with-sequencer=yes --with-oss=yes --with-debug=detect --with-cards=cs46xx,opti92x-ad1848 make
make install
depmod -a
(depmod returns no unresolved symbols)
Quoted 3 lines
gate:~# modprobe snd-opti92x-ad1848 /lib/modules/2.2.24/misc/snd-hwdep.o: unresolved symbol snd_register_oss_device_Rddc5e1d2
there has been no change about the version symbols in the ALSA codes for very long time.
did you run make clean ?
Takashi
-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program. SourceForge.net hosts over 70,000 Open Source Projects. See the people who have HELPED US provide better services:
Click here: http://sourceforge.net/supporters.php
At Wed, 15 Oct 2003 14:05:27 +0300,
Quoted 31 lines · Andrei Boros
Quoted 15 lines · Takashi Iwai
At Wed, 15 Oct 2003 13:07:22 +0300,
Quoted 12 lines · Andrei Boros
Attempting again at opti92x-ad1848 build from cvs tree taken today :
compilation goes well (all components of alsa).
./configure --with-isapnp=yes --with-sequencer=yes --with-oss=yes --with-debug=detect --with-cards=cs46xx,opti92x-ad1848 make
make install
depmod -a
(depmod returns no unresolved symbols)Quoted 7 lines
Quoted 3 lines
gate:~# modprobe snd-opti92x-ad1848 /lib/modules/2.2.24/misc/snd-hwdep.o: unresolved symbol snd_register_oss_device_Rddc5e1d2there has been no change about the version symbols in the ALSA codes for very long time.
did you run make clean ?Actually I erased the entire alsa-driver, alsa-kernel and alsa-oss directories and get a fresh, clean copy with cvs just before I did the above.
Quoted 7 lines
Ok, I am rechecking my steps.
- Delete alsa-driver, alsa-kernel, alsa-oss directories.
- also/lib/modules/2.2.24/misc/snd*.o
- getting latest with cvs
- in alsa-driver, cvscompile. I stop it when it gets to the configure stage so I can give coonfigure my set of parameters.
- make
unload all ALSA (and isapnp, pnp) modules before the following.
Quoted 11 lines
- make install
- depmod -a
- modprobe ....Odd, i get only one unresolved symbol now (now I also deleted alsa-oss, which i did not before.
ok, here it is :gate:~/install/alsa-cvs/alsa-driver# modprobe snd-opti92x-ad1848 /lib/modules/2.2.24/misc/snd-opti92x-ad1848.o: unresolved symbol isapnp_resource_change_R09b965af snd: Device or resource busy
it must be the old isapnp module which wasn't unloaded.
Takashi
-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program. SourceForge.net hosts over 70,000 Open Source Projects. See the people who have HELPED US provide better services:
Click here: http://sourceforge.net/supporters.php
Quoted 5 lines
unload all ALSA (and isapnp, pnp) modules before the following.
it must be the old isapnp module which wasn't unloaded.
I checked that no sound related modules are loaded. I removed snd*.o from the /lib/modules...
I did make install, depmod -a
My /etc/modules.conf reads :
alias char-major-116 snd options snd cards_limit=2 alias snd-card-0 snd-cs46xx alias snd-card-1 snd-opti92x-ad1848 options snd-opti-92x-ad1848 index=1 isapnp=1 id="Opti924" port=0x220
irq=5 dma1=0 fm_port=0x388 mpu_port=0x300 mpu_irq=7
(i also have a hercules fortissimo 2, the cs46xx which works fine)
So now I am sure no sound related modules are loaded. modprobe snd-opti92x-ad1848 says /lib/modules/2.2.24/misc/snd-opti92x-ad1848.o: unresolved symbol isapnp_resource_change_R09b965af
snd: Device or resource busy
I see that snd-isapnp is not loaded
Again, I unload _all_ modules.
I do modprobe snd-isapnp by hand
dmesg
isapnp: Card 'OPTi Audio 16'
isapnp: 1 Plug & Play card detected total
below is the contents of /proc/isapnp
gate:~# modprobe snd-opti92x-ad1848 /lib/modules/2.2.24/misc/snd-opti92x-ad1848.o: init_module: Device or resource busy snd: Device or resource busy
I take a look at the /proc/isapnp and I see that the device did not get enabled
At this point I am out of ideas...
Card 1 'OPT0924:OPTi Audio 16' PnP version 1.0
Logical device 0 'OPT0000:Pro Audio 16'
Device is not active
Active port 0x220
Resources 0
Priority preferred
Port 0x220-0x240, align 0x1f, size 0x10, 10-bit address decoding
Port 0x130-0x3f0, align 0x3, size 0x8, 10-bit address decoding
Resources 1
Priority acceptable
Port 0x380-0x380, align 0xf, size 0xc, 10-bit address decoding
IRQ 5,7,10 High-Edge
DMA 0,1,3 8-bit compatible
Alternate resources 1:1
Priority acceptable
Port 0x380-0x3f0, align 0xf, size 0xc, 10-bit address decoding
IRQ 5,7,2/9,10,11 High-Edge
DMA 0,1,3 8-bit compatible
DMA 0,1,3 8-bit compatible
Logical device 1 'OPT0001:Game Port'
Compatible device PNPb02f
Device is not active
Resources 0
Priority acceptable
Port 0x201-0x201, align 0x0, size 0x1, 10-bit address decoding
Alternate resources 0:1
Priority acceptable
Port 0x100-0x3f0, align 0xf, size 0x2, 10-bit address decoding
Logical device 2 'OPT0002:MPU401'
Device is not active
Active port 0x300
Active IRQ 9 [0x2]
Resources 0
Priority preferred
Port 0x300-0x330, align 0xf, size 0x2, 10-bit address decoding
IRQ 5,7,2/9,10 High-Edge
Logical device 3 'OPT0003:CD'
Compatible device PNP0600
Device is active
Active port 0x376,0x170
Active IRQ 15 [0x2]
Resources 0
Priority preferred
IRQ 15 High-Edge
Resources 1
Priority acceptable
Port 0x376-0x376, align 0xf, size 0x2, 10-bit address decoding
Port 0x170-0x170, align 0xf, size 0x8, 10-bit address decoding
Alternate resources 1:1
Priority acceptable
Port 0x376-0x3f6, align 0xf, size 0x2, 10-bit address decoding
Port 0x170-0x3f0, align 0xf, size 0x8, 10-bit address decoding
Logical device 4 'OPT0004:Modem'
Compatible device PNP0500
Device is not active
Resources 0
Priority preferred
IRQ 3,4,5,7,2/9,10,11 High-Edge
Resources 1
Priority acceptable
Port 0x2e8-0x2f8, align 0xf, size 0x8, 10-bit address decoding
Alternate resources 1:1
Priority acceptable
Port 0x3e8-0x3f8, align 0xf, size 0x8, 10-bit address decoding
Alternate resources 1:2
Priority acceptable
Port 0x100-0x3f0, align 0xf, size 0x8, 10-bit address decoding
Logical device 5 'OPT0005:OPT924'
Device is not active
Active port 0x30d
Resources 0
Priority preferred
Port 0x30d-0x3ed, align 0x1f, size 0x9, 10-bit address decoding
Resources 1
Priority acceptable
IRQ 5,10,11 High-EdgeSignature · 11 lines
ing. Andrei Boros mailto:[email protected] / +40-21-303-1870 Centrul pt. Tehnologia Informatiei Societatea Romana de Radiodifuziune ------------------------------------------------------- This SF.net email is sponsored by: SF.net Giveback Program. SourceForge.net hosts over 70,000 Open Source Projects. See the people who have HELPED US provide better services: Click here: http://sourceforge.net/supporters.php
At Thu, 16 Oct 2003 09:48:02 +0300,
Quoted 37 lines · Andrei Boros
Quoted 6 lines
unload all ALSA (and isapnp, pnp) modules before the following.
it must be the old isapnp module which wasn't unloaded.
I checked that no sound related modules are loaded. I removed snd*.o from the
/lib/modules...
I did make install, depmod -aMy
/etc/modules.confreads :alias char-major-116 snd options snd cards_limit=2 alias snd-card-0 snd-cs46xx alias snd-card-1 snd-opti92x-ad1848 options snd-opti-92x-ad1848 index=1 isapnp=1 id="Opti924" port=0x220irq=5 dma1=0 fm_port=0x388 mpu_port=0x300 mpu_irq=7
(i also have a hercules fortissimo 2, the cs46xx which works fine)
So now I am sure no sound related modules are loaded. modprobe snd-opti92x-ad1848 says
/lib/modules/2.2.24/misc/snd-opti92x-ad1848.o: unresolved symbolisapnp_resource_change_R09b965af
snd: Device or resource busyI see that snd-isapnp is not loaded
Again, I unload _all_ modules.
I do modprobe snd-isapnp by hand
dmesgisapnp: Card 'OPTi Audio 16'
isapnp: 1 Plug & Play card detected totalbelow is the contents of
/proc/isapnp
Quoted 7 lines
gate:~# modprobe snd-opti92x-ad1848 /lib/modules/2.2.24/misc/snd-opti92x-ad1848.o: init_module: Device or resource busy snd: Device or resource busyI take a look at the
/proc/isapnpand I see that the device did not get enabled
the devices are activated by the alsa driver. so it's ok. the problem is that the detection of device failed by some reason.
Takashi
-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program. SourceForge.net hosts over 70,000 Open Source Projects. See the people who have HELPED US provide better services:
Click here: http://sourceforge.net/supporters.php