No sound with intel hda driver on a sony vaio vgx xl100 system
Hi
I can't have any sound on my sony VAIO vgx-xl100 system with the 1.0.14rc2 build on a 2.6.18 kernel (debian)
the output of lspci -nv is :
00:1b.0 0403: 8086:27d8 (rev 01)
Subsystem: 104d:81f7 Flags: bus master, fast devsel, latency 0, IRQ 169 Memory at fdff8000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied>
dmesg gives :
ACPI: PCI interrupt for device 0000:00:1b.0 disabled
PCI: Enabling device 0000:00:1b.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1b.0 to 64
ALSA /home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_intel.c:696:codec_mask = 0x1
ALSA /home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:611:AUD_IN = 6
ALSA /home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:233:
UNMUTE IN: NID=0x6 IDX=0x0
ALSA /home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:233:
UNMUTE IN: NID=0xe IDX=0x0
ALSA /home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:233:
UNMUTE IN: NID=0x7 IDX=0x0
ALSA /home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:217:
UNMUTE OUT: NID=0x7
ALSA /home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:648:
[Capture Source] NID=0x6, #SRC=1
ALSA /home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:651:
[Line] IDX=0x0
ALSA /home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:289:AUD_OUT found 2
ALSA /home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:233:
UNMUTE IN: NID=0xa IDX=0x0
ALSA /home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:217:
UNMUTE OUT: NID=0xa
ALSA /home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:217:
UNMUTE OUT: NID=0xa
ALSA /home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:251:
CONNECT: NID=0x6 IDX=0x0
ALSA /home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:713:
[Master Playback Switch] NID=0x2, DIR=OUT
ALSA /home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:733:
[Master Playback Volume] NID=0x2, DIR=OUT
and the contents of /proc/asound/card0/codec# is :
Codec: SigmaTel CXD9872RD/K
Address: 0
Vendor Id: 0x83847661
Subsystem Id: 0x104d0b00
Revision Id: 0x104201
Default PCM:
rates [0x7e0]: 44100 48000 88200 96000 176400 192000
bits [0xe]: 16 20 24
formats [0x1]: PCMDefault Amp-In caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1 Default Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x02, mute=1 Node 0x02 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0x3c 0x3c]
Power: 0x0
Node 0x03 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0xff 0xff]
Power: 0x0
Node 0x04 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0xff 0xff]
Power: 0x0
Node 0x05 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0x3c 0x3c]
Power: 0x0
Node 0x06 [Audio Input] wcaps 0x1d0541: Stereo
Power: 0x0
Connection: 1
0x07
Node 0x07 [Audio Selector] wcaps 0x300903: Stereo Amp-In
Amp-In caps: N/A
Amp-In vals: [0x00 0x00]
Connection: 1
0x0e
Node 0x08 [Audio Input] wcaps 0x1d0541: Stereo
Power: 0x0
Connection: 1
0x09Node 0x09 [Audio Selector] wcaps 0x300903: Stereo Amp-In
Amp-In caps: N/A
Amp-In vals: [0x80 0x80]
Connection: 1
0x15
Node 0x0a [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x08173c: IN OUT HP Detect
Pin Default 0x02024110: [Jack] Line Out at Ext Front
Conn = 1/4, Color = Green
Pin-ctls: 0xc0: OUT HP
Connection: 1
0x02
Node 0x0b [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x0814: OUT Detect
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
Pin-ctls: 0x00:
Connection: 1
0x04
Node 0x0c [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x0814: OUT Detect
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
Pin-ctls: 0x00:
Connection: 1
0x03
Node 0x0d [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x08173c: IN OUT HP Detect
Pin Default 0x02a19920: [Jack] Mic at Ext Front
Conn = 1/8, Color = Pink
Pin-ctls: 0x24: IN
Connection: 1
0x02
Node 0x0e [Pin Complex] wcaps 0x400081: Stereo
Pincap 0x0824: IN Detect
Pin Default 0x01845121: [Jack] Line In at Ext Rear
Conn = RCA, Color = Red
Pin-ctls: 0x20: IN
Node 0x0f [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x0814: OUT Detect
Pin Default 0x01045111: [Jack] Line Out at Ext Rear
Conn = RCA, Color = Red
Pin-ctls: 0x40: OUT
Connection: 1
0x05
Node 0x10 [Audio Output] wcaps 0x40211: Stereo Digital
PCM:
rates [0x3e0]: 44100 48000 88200 96000 176400
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3Node 0x11 [Pin Complex] wcaps 0x400301: Stereo Digital
Pincap 0x0810: OUT
Pin Default 0x01451112: [Jack] SPDIF Out at Ext Rear
Conn = Optical, Color = Black
Pin-ctls: 0x00:
Connection: 2
0x10* 0x09
Node 0x12 [Audio Input] wcaps 0x140311: Stereo Digital
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
Connection: 1
0x13Node 0x13 [Pin Complex] wcaps 0x440381: Stereo Digital
Pincap 0x0834: IN OUT Detect
Pin Default 0x01c51122: [Jack] SPDIF In at Ext Rear
Conn = Optical, Color = Black
Pin-ctls: 0x00:
Connection: 1
0x18
Node 0x14 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x0820: IN
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
Pin-ctls: 0x20: IN
Node 0x15 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=1 Amp-Out vals: [0x00 0x00]
Connection: 4
0x0a 0x0d* 0x14 0x02
Node 0x16 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
Amp-Out caps: ofs=0x03, nsteps=0x03, stepsize=0x17, mute=0 Amp-Out vals: [0x00]
Node 0x17 [Volume Knob Widget] wcaps 0x600000: Mono Node 0x18 [Audio Output] wcaps 0x40201: Stereo Digital
---------------------------------
Jean-Marc Segretain
mailto:[email protected]
___________________________________________________________________________
Découvrez une nouvelle façon d'obtenir des réponses à toutes vos questions !
Profitez des connaissances, des opinions et des expériences des internautes sur Yahoo! Questions/Réponses
http://fr.answers.yahoo.com
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
Your subsystem ID (104d:81f7) is not listed in the driver currently. The driver is configured to use the generic parser if it can't find a match.
There are two defined models for your codec (vaio, vaio-ar). Try loading the driver with one of those models as follows:
modprobe -r snd-hda-intel # remove driver
modprobe snd-hda-intel model=vaio # reload with model deffinition
Try both model deffinitions to see which works better for you. Report back your results and we'll get it added.
Thanks,
Tobin Davis
Quoted 220 lines · On Mon, 2007-01-22 at 22:22 +0100, [email protected] wrote:
Hi
I can't have any sound on my sony VAIO vgx-xl100 system with the 1.0.14rc2 build on a 2.6.18 kernel (debian)
the output of lspci -nv is :
00:1b.0 0403: 8086:27d8 (rev 01)
Subsystem: 104d:81f7 Flags: bus master, fast devsel, latency 0, IRQ 169 Memory at fdff8000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied>dmesg gives :
ACPI: PCI interrupt for device 0000:00:1b.0 disabled
PCI: Enabling device 0000:00:1b.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1b.0 to 64
ALSA/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_intel.c:696:codec_mask=0x1
ALSA/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:611:AUD_IN= 6
ALSA/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:233:
UNMUTE IN: NID=0x6 IDX=0x0
ALSA/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:233:
UNMUTE IN: NID=0xe IDX=0x0
ALSA/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:233:
UNMUTE IN: NID=0x7 IDX=0x0
ALSA/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:217:
UNMUTE OUT: NID=0x7
ALSA/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:648:
[Capture Source] NID=0x6, #SRC=1
ALSA/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:651:
[Line] IDX=0x0
ALSA/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:289:AUD_OUTfound 2
ALSA/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:233:
UNMUTE IN: NID=0xa IDX=0x0
ALSA/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:217:
UNMUTE OUT: NID=0xa
ALSA/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:217:
UNMUTE OUT: NID=0xa
ALSA/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:251:
CONNECT: NID=0x6 IDX=0x0
ALSA/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:713:
[Master Playback Switch] NID=0x2, DIR=OUT
ALSA/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:733:
[Master Playback Volume] NID=0x2, DIR=OUTand the contents of /proc/asound/card0/codec# is :
Codec: SigmaTel CXD9872RD/K
Address: 0
Vendor Id:0x83847661
Subsystem Id:0x104d0b00
Revision Id:0x104201
Default PCM:rates [0x7e0]: 44100 48000 88200 96000 176400 192000 bits [0xe]: 16 20 24 formats [0x1]: PCMDefault Amp-In caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1 Default Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x02, mute=1 Node
0x02[Audio Output] wcaps0xd0c05: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0x3c0x3c]
Power:0x0
Node0x03[Audio Output] wcaps0xd0c05: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0xff0xff]
Power:0x0
Node0x04[Audio Output] wcaps0xd0c05: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0xff0xff]
Power:0x0
Node0x05[Audio Output] wcaps0xd0c05: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0x3c0x3c]
Power:0x0
Node0x06[Audio Input] wcaps0x1d0541: Stereo
Power:0x0
Connection: 10x07Node
0x07[Audio Selector] wcaps0x300903: Stereo Amp-In
Amp-In caps: N/A
Amp-In vals: [0x000x00]
Connection: 10x0e Node 0x08 [Audio Input] wcaps 0x1d0541: Stereo Power: 0x0 Connection: 1 0x09Node
0x09[Audio Selector] wcaps0x300903: Stereo Amp-In
Amp-In caps: N/A
Amp-In vals: [0x800x80]
Connection: 10x15Node
0x0a[Pin Complex] wcaps0x400181: Stereo
Pincap0x08173c: IN OUT HP Detect
Pin Default0x02024110: [Jack] Line Out at Ext Front
Conn = 1/4, Color = Green
Pin-ctls:0xc0: OUT HP
Connection: 10x02Node
0x0b[Pin Complex] wcaps0x400181: Stereo
Pincap0x0814: OUT Detect
Pin Default0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
Pin-ctls:0x00:
Connection: 10x04Node
0x0c[Pin Complex] wcaps0x400181: Stereo
Pincap0x0814: OUT Detect
Pin Default0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
Pin-ctls:0x00:
Connection: 10x03Node
0x0d[Pin Complex] wcaps0x400181: Stereo
Pincap0x08173c: IN OUT HP Detect
Pin Default0x02a19920: [Jack] Mic at Ext Front
Conn = 1/8, Color = Pink
Pin-ctls:0x24: IN
Connection: 10x02Node
0x0e[Pin Complex] wcaps0x400081: Stereo
Pincap0x0824: IN Detect
Pin Default0x01845121: [Jack] Line In at Ext Rear
Conn = RCA, Color = Red
Pin-ctls:0x20: IN
Node0x0f[Pin Complex] wcaps0x400181: Stereo
Pincap0x0814: OUT Detect
Pin Default0x01045111: [Jack] Line Out at Ext Rear
Conn = RCA, Color = Red
Pin-ctls:0x40: OUT
Connection: 10x05 Node 0x10 [Audio Output] wcaps 0x40211: Stereo Digital PCM: rates [0x3e0]: 44100 48000 88200 96000 176400 bits [0xe]: 16 20 24 formats [0x5]: PCM AC3Node
0x11[Pin Complex] wcaps0x400301: Stereo Digital
Pincap0x0810: OUT
Pin Default0x01451112: [Jack] SPDIF Out at Ext Rear
Conn = Optical, Color = Black
Pin-ctls:0x00:
Connection: 20x10* 0x09 Node 0x12 [Audio Input] wcaps 0x140311: Stereo Digital PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x5]: PCM AC3 Connection: 1 0x13Node
0x13[Pin Complex] wcaps0x440381: Stereo Digital
Pincap0x0834: IN OUT Detect
Pin Default0x01c51122: [Jack] SPDIF In at Ext Rear
Conn = Optical, Color = Black
Pin-ctls:0x00:
Connection: 10x18Node
0x14[Pin Complex] wcaps0x400001: Stereo
Pincap0x0820: IN
Pin Default0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
Pin-ctls:0x20: IN
Node0x15[Audio Selector] wcaps0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=1 Amp-Out vals: [0x000x00]
Connection: 40x0a 0x0d* 0x14 0x02Node
0x16[Beep Generator Widget] wcaps0x70000c: Mono Amp-Out
Amp-Out caps: ofs=0x03, nsteps=0x03, stepsize=0x17, mute=0 Amp-Out vals: [0x00]
Node0x17[Volume Knob Widget] wcaps0x600000: Mono Node0x18[Audio Output] wcaps0x40201: Stereo Digital---------------------------------
Jean-Marc Segretain
mailto:[email protected]___________________________________________________________________________
Découvrez une nouvelle façon d'obtenir des réponses à toutes vos questions !
Profitez des connaissances, des opinions et des expériences des internautes sur Yahoo! Questions/Réponses
http://fr.answers.yahoo.com-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
Signature · 1 line
Tobin Davis <[email protected]>
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
I have tried both model. none of them works.
Is there anything I missed ?
Quoted 9 lines · --- Tobin Davis
Your subsystem ID (104d:81f7) is not listed in the driver currently. The driver is configured to use the generic parser if it can't find a match.
There are two defined models for your codec (vaio, vaio-ar). Try loading the driver with one of those models as follows:
modprobe -r snd-hda-intel # remove driver
modprobe snd-hda-intel model=vaio # reload with model deffinition
Quoted 31 lines
Try both model deffinitions to see which works better for you. Report back your results and we'll get it added.
Thanks,
Tobin Davis
Quoted 21 lines · On Mon, 2007-01-22 at 22:22 +0100, [email protected] wrote:
Hi
I can't have any sound on my sony VAIO vgx-xl100 system with the 1.0.14rc2 build on a 2.6.18 kernel (debian)
the output of lspci -nv is :
00:1b.0 0403: 8086:27d8 (rev 01)
Subsystem: 104d:81f7 Flags: bus master, fast devsel, latency 0, IRQ 169 Memory at fdff8000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied>dmesg gives :
ACPI: PCI interrupt for device 0000:00:1b.0 disabled
PCI: Enabling device 0000:00:1b.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1b.0 to 64 ALSA
/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_intel.c:696:
Quoted 4 lines
Quoted 3 lines
codec_mask=0x1
ALSA
/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:611:
Quoted 4 lines
Quoted 3 lines
AUD_IN= 6
ALSA
/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:233:
Quoted 4 lines
Quoted 3 lines
UNMUTE IN: NID=0x6 IDX=0x0
ALSA
/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:233:
Quoted 4 lines
Quoted 3 lines
UNMUTE IN: NID=0xe IDX=0x0
ALSA
/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:233:
Quoted 4 lines
Quoted 3 lines
UNMUTE IN: NID=0x7 IDX=0x0
ALSA
/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:217:
Quoted 4 lines
Quoted 3 lines
UNMUTE OUT: NID=0x7
ALSA
/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:648:
Quoted 4 lines
Quoted 3 lines
[Capture Source] NID=0x6, #SRC=1
ALSA
/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:651:
Quoted 4 lines
Quoted 3 lines
[Line] IDX=0x0
ALSA
/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:289:
Quoted 4 lines
Quoted 3 lines
AUD_OUTfound 2
ALSA
/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:233:
Quoted 4 lines
Quoted 3 lines
UNMUTE IN: NID=0xa IDX=0x0
ALSA
/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:217:
Quoted 4 lines
Quoted 3 lines
UNMUTE OUT: NID=0xa
ALSA
/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:217:
Quoted 4 lines
Quoted 3 lines
UNMUTE OUT: NID=0xa
ALSA
/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:251:
Quoted 4 lines
Quoted 3 lines
CONNECT: NID=0x6 IDX=0x0
ALSA
/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:713:
Quoted 4 lines
Quoted 3 lines
[Master Playback Switch] NID=0x2, DIR=OUT
ALSA
/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:733:
Quoted 97 lines
Quoted 97 lines
[Master Playback Volume] NID=0x2, DIR=OUT
and the contents of /proc/asound/card0/codec# is :
Codec: SigmaTel CXD9872RD/K
Address: 0
Vendor Id:0x83847661
Subsystem Id:0x104d0b00
Revision Id:0x104201
Default PCM:rates [0x7e0]: 44100 48000 88200 96000 176400 192000 bits [0xe]: 16 20 24 formats [0x1]: PCMDefault Amp-In caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1 Default Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x02, mute=1 Node
0x02[Audio Output] wcaps0xd0c05: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0x3c0x3c]
Power:0x0
Node0x03[Audio Output] wcaps0xd0c05: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0xff0xff]
Power:0x0
Node0x04[Audio Output] wcaps0xd0c05: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0xff0xff]
Power:0x0
Node0x05[Audio Output] wcaps0xd0c05: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0x3c0x3c]
Power:0x0
Node0x06[Audio Input] wcaps0x1d0541: Stereo
Power:0x0
Connection: 10x07Node
0x07[Audio Selector] wcaps0x300903: Stereo Amp-In
Amp-In caps: N/A
Amp-In vals: [0x000x00]
Connection: 10x0e Node 0x08 [Audio Input] wcaps 0x1d0541: Stereo Power: 0x0 Connection: 1 0x09Node
0x09[Audio Selector] wcaps0x300903: Stereo Amp-In
Amp-In caps: N/A
Amp-In vals: [0x800x80]
Connection: 10x15Node
0x0a[Pin Complex] wcaps0x400181: Stereo
Pincap0x08173c: IN OUT HP Detect
Pin Default0x02024110: [Jack] Line Out at Ext Front
Conn = 1/4, Color = Green
Pin-ctls:0xc0: OUT HP
Connection: 10x02Node
0x0b[Pin Complex] wcaps0x400181: Stereo
Pincap0x0814: OUT Detect
Pin Default0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
Pin-ctls:0x00:
Connection: 10x04Node
0x0c[Pin Complex] wcaps0x400181: Stereo
Pincap0x0814: OUT Detect
Pin Default0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
Pin-ctls:0x00:
Connection: 10x03Node
0x0d[Pin Complex] wcaps0x400181: Stereo
Pincap0x08173c: IN OUT HP Detect
Pin Default0x02a19920: [Jack] Mic at Ext Front
Conn = 1/8, Color = Pink
Pin-ctls:0x24: IN
Connection: 10x02Node
0x0e[Pin Complex] wcaps0x400081: Stereo
Pincap0x0824: IN Detect
Pin Default0x01845121: [Jack] Line In at Ext Rear
Conn = RCA, Color = Red
Pin-ctls:0x20: IN
Node0x0f[Pin Complex] wcaps0x400181: Stereo
Pincap0x0814: OUT Detect
Pin Default0x01045111: [Jack] Line Out at Ext Rear
Conn = RCA, Color = Red
Pin-ctls:0x40: OUT
Connection: 10x05 Node 0x10 [Audio Output] wcaps 0x40211: Stereo Digital PCM: rates [0x3e0]: 44100 48000 88200 96000 176400 bits [0xe]: 16 20 24 formats [0x5]: PCM AC3Node
0x11[Pin Complex] wcaps0x400301: Stereo Digital
Pincap0x0810: OUT
Pin Default0x01451112: [Jack] SPDIF Out at Ext Rear
Quoted 9 lines
Quoted 8 lines
Conn = Optical, Color = Black
Pin-ctls:0x00:
Connection: 20x10* 0x09 Node 0x12 [Audio Input] wcaps 0x140311: Stereo Digital PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24
=== message truncated ===
___________________________________________________________________________
Découvrez une nouvelle façon d'obtenir des réponses à toutes vos questions !
Profitez des connaissances, des opinions et des expériences des internautes sur Yahoo! Questions/Réponses
http://fr.answers.yahoo.com
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
At Tue, 23 Jan 2007 23:46:42 +0100 (CET),
Quoted 3 lines · <[email protected]> wrote:
I have tried both model. none of them works.
Is there anything I missed ?
Please elaborate what didn't work exactly. If you specified model option, the kernel messages must appear differently. If not, the model option was not passed properly by any reason.
Takashi
Quoted 233 lines
Quoted 9 lines · --- Tobin Davis
Your subsystem ID (104d:81f7) is not listed in the driver currently. The driver is configured to use the generic parser if it can't find a match.
There are two defined models for your codec (vaio, vaio-ar). Try loading the driver with one of those models as follows:
modprobe -r snd-hda-intel # remove driver
modprobe snd-hda-intel model=vaio # reload with model deffinitionQuoted 31 lines
Try both model deffinitions to see which works better for you. Report back your results and we'll get it added.
Thanks,
Tobin Davis
Quoted 21 lines · On Mon, 2007-01-22 at 22:22 +0100, [email protected] wrote:
Hi
I can't have any sound on my sony VAIO vgx-xl100 system with the 1.0.14rc2 build on a 2.6.18 kernel (debian)
the output of lspci -nv is :
00:1b.0 0403: 8086:27d8 (rev 01)
Subsystem: 104d:81f7 Flags: bus master, fast devsel, latency 0, IRQ 169 Memory at fdff8000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied>dmesg gives :
ACPI: PCI interrupt for device 0000:00:1b.0 disabled
PCI: Enabling device 0000:00:1b.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1b.0 to 64 ALSA
/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_intel.c:696:Quoted 4 lines
Quoted 3 lines
codec_mask=0x1
ALSA
/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:611:Quoted 4 lines
Quoted 3 lines
AUD_IN= 6
ALSA
/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:233:Quoted 4 lines
Quoted 3 lines
UNMUTE IN: NID=0x6 IDX=0x0
ALSA
/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:233:Quoted 4 lines
Quoted 3 lines
UNMUTE IN: NID=0xe IDX=0x0
ALSA
/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:233:Quoted 4 lines
Quoted 3 lines
UNMUTE IN: NID=0x7 IDX=0x0
ALSA
/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:217:Quoted 4 lines
Quoted 3 lines
UNMUTE OUT: NID=0x7
ALSA
/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:648:Quoted 4 lines
Quoted 3 lines
[Capture Source] NID=0x6, #SRC=1
ALSA
/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:651:Quoted 4 lines
Quoted 3 lines
[Line] IDX=0x0
ALSA
/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:289:Quoted 4 lines
Quoted 3 lines
AUD_OUTfound 2
ALSA
/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:233:Quoted 4 lines
Quoted 3 lines
UNMUTE IN: NID=0xa IDX=0x0
ALSA
/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:217:Quoted 4 lines
Quoted 3 lines
UNMUTE OUT: NID=0xa
ALSA
/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:217:Quoted 4 lines
Quoted 3 lines
UNMUTE OUT: NID=0xa
ALSA
/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:251:Quoted 4 lines
Quoted 3 lines
CONNECT: NID=0x6 IDX=0x0
ALSA
/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:713:Quoted 4 lines
Quoted 3 lines
[Master Playback Switch] NID=0x2, DIR=OUT
ALSA
/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:733:Quoted 97 lines
Quoted 97 lines
[Master Playback Volume] NID=0x2, DIR=OUT
and the contents of /proc/asound/card0/codec# is :
Codec: SigmaTel CXD9872RD/K
Address: 0
Vendor Id:0x83847661
Subsystem Id:0x104d0b00
Revision Id:0x104201
Default PCM:rates [0x7e0]: 44100 48000 88200 96000 176400 192000 bits [0xe]: 16 20 24 formats [0x1]: PCMDefault Amp-In caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1 Default Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x02, mute=1 Node
0x02[Audio Output] wcaps0xd0c05: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0x3c0x3c]
Power:0x0
Node0x03[Audio Output] wcaps0xd0c05: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0xff0xff]
Power:0x0
Node0x04[Audio Output] wcaps0xd0c05: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0xff0xff]
Power:0x0
Node0x05[Audio Output] wcaps0xd0c05: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0x3c0x3c]
Power:0x0
Node0x06[Audio Input] wcaps0x1d0541: Stereo
Power:0x0
Connection: 10x07Node
0x07[Audio Selector] wcaps0x300903: Stereo Amp-In
Amp-In caps: N/A
Amp-In vals: [0x000x00]
Connection: 10x0e Node 0x08 [Audio Input] wcaps 0x1d0541: Stereo Power: 0x0 Connection: 1 0x09Node
0x09[Audio Selector] wcaps0x300903: Stereo Amp-In
Amp-In caps: N/A
Amp-In vals: [0x800x80]
Connection: 10x15Node
0x0a[Pin Complex] wcaps0x400181: Stereo
Pincap0x08173c: IN OUT HP Detect
Pin Default0x02024110: [Jack] Line Out at Ext Front
Conn = 1/4, Color = Green
Pin-ctls:0xc0: OUT HP
Connection: 10x02Node
0x0b[Pin Complex] wcaps0x400181: Stereo
Pincap0x0814: OUT Detect
Pin Default0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
Pin-ctls:0x00:
Connection: 10x04Node
0x0c[Pin Complex] wcaps0x400181: Stereo
Pincap0x0814: OUT Detect
Pin Default0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
Pin-ctls:0x00:
Connection: 10x03Node
0x0d[Pin Complex] wcaps0x400181: Stereo
Pincap0x08173c: IN OUT HP Detect
Pin Default0x02a19920: [Jack] Mic at Ext Front
Conn = 1/8, Color = Pink
Pin-ctls:0x24: IN
Connection: 10x02Node
0x0e[Pin Complex] wcaps0x400081: Stereo
Pincap0x0824: IN Detect
Pin Default0x01845121: [Jack] Line In at Ext Rear
Conn = RCA, Color = Red
Pin-ctls:0x20: IN
Node0x0f[Pin Complex] wcaps0x400181: Stereo
Pincap0x0814: OUT Detect
Pin Default0x01045111: [Jack] Line Out at Ext Rear
Conn = RCA, Color = Red
Pin-ctls:0x40: OUT
Connection: 10x05 Node 0x10 [Audio Output] wcaps 0x40211: Stereo Digital PCM: rates [0x3e0]: 44100 48000 88200 96000 176400 bits [0xe]: 16 20 24 formats [0x5]: PCM AC3Node
0x11[Pin Complex] wcaps0x400301: Stereo Digital
Pincap0x0810: OUT
Pin Default0x01451112: [Jack] SPDIF Out at Ext RearQuoted 9 lines
Quoted 8 lines
Conn = Optical, Color = Black
Pin-ctls:0x00:
Connection: 20x10* 0x09 Node 0x12 [Audio Input] wcaps 0x140311: Stereo Digital PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24=== message truncated ===
___________________________________________________________________________
Découvrez une nouvelle façon d'obtenir des réponses à toutes vos questions !
Profitez des connaissances, des opinions et des expériences des internautes sur Yahoo! Questions/Réponses
http://fr.answers.yahoo.com
Quoted 10 lines
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
When i force model "vaio" dmesg gives :
ACPI: PCI interrupt for device 0000:00:1b.0 disabled
PCI: Enabling device 0000:00:1b.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1b.0 to 64
ALSA /home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_intel.c:696:codec_mask = 0x1
ALSA /home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/hda_codec.c:1739: hda_codec:
model 'vaio' is selected
When i force "vaio-ar" :
ACPI: PCI interrupt for device 0000:00:1b.0 disabled
PCI: Enabling device 0000:00:1b.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1b.0 to 64
ALSA /home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_intel.c:696:codec_mask = 0x1
ALSA /home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/hda_codec.c:1739: hda_codec:
model 'vaio-ar' is selected
What other information so you need ?
Jean-Marc
Quoted 31 lines · --- Takashi Iwai
At Tue, 23 Jan 2007 23:46:42 +0100 (CET),
Quoted 3 lines · <[email protected]> wrote:
I have tried both model. none of them works.
Is there anything I missed ?Please elaborate what didn't work exactly. If you specified model option, the kernel messages must appear differently. If not, the model option was not passed properly by any reason.
Takashi
Quoted 17 lines
Quoted 14 lines · --- Tobin Davis
Your subsystem ID (104d:81f7) is not listed in the driver currently. The driver is configured to use the generic parser if it can't find a match.
There are two defined models for your codec (vaio, vaio-ar). Try loading the driver with one of those models as follows:
modprobe -r snd-hda-intel # remove driver
modprobe snd-hda-intel model=vaio # reload with model deffinitionTry both model deffinitions to see which works better for you. Report back your results and we'll get it added.
Thanks,
Quoted 28 lines
Quoted 7 lines
Quoted 7 lines
Tobin Davis
Quoted 3 lines · On Mon, 2007-01-22 at 22:22 +0100, [email protected] wrote:
Hi
I can't have any sound on my sony VAIO vgx-xl100 system with the
1.0.14rc2
Quoted 20 lines
Quoted 19 lines
Quoted 18 lines
build on a 2.6.18 kernel (debian)
the output of lspci -nv is :
00:1b.0 0403: 8086:27d8 (rev 01)
Subsystem: 104d:81f7 Flags: bus master, fast devsel, latency 0, IRQ 169 Memory at fdff8000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied>dmesg gives :
ACPI: PCI interrupt for device 0000:00:1b.0 disabled
PCI: Enabling device 0000:00:1b.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1b.0 to 64 ALSA
___________________________________________________________________________
Découvrez une nouvelle façon d'obtenir des réponses à toutes vos questions !
Profitez des connaissances, des opinions et des expériences des internautes sur Yahoo! Questions/Réponses
http://fr.answers.yahoo.com
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
At Thu, 25 Jan 2007 23:20:22 +0100 (CET),
Quoted 25 lines · <[email protected]> wrote:
When i force model "vaio" dmesg gives :
ACPI: PCI interrupt for device 0000:00:1b.0 disabled
PCI: Enabling device 0000:00:1b.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1b.0 to 64
ALSA/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_intel.c:696:codec_mask=0x1
ALSA/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/hda_codec.c:1739:hda_codec:
model 'vaio' is selectedWhen i force "vaio-ar" :
ACPI: PCI interrupt for device 0000:00:1b.0 disabled
PCI: Enabling device 0000:00:1b.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1b.0 to 64
ALSA/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_intel.c:696:codec_mask=0x1
ALSA/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/hda_codec.c:1739:hda_codec:
model 'vaio-ar' is selected
Quoted 1 line
What other information so you need ?
The facts: What did you test and didn't work as expected?
Note that the mixer appearance should be different from the state without model option.
Takashi
Quoted 72 lines
Jean-Marc
Quoted 31 lines · --- Takashi Iwai
At Tue, 23 Jan 2007 23:46:42 +0100 (CET),
Quoted 3 lines · <[email protected]> wrote:
I have tried both model. none of them works.
Is there anything I missed ?Please elaborate what didn't work exactly. If you specified model option, the kernel messages must appear differently. If not, the model option was not passed properly by any reason.
Takashi
Quoted 17 lines
Quoted 14 lines · --- Tobin Davis
Your subsystem ID (104d:81f7) is not listed in the driver currently. The driver is configured to use the generic parser if it can't find a match.
There are two defined models for your codec (vaio, vaio-ar). Try loading the driver with one of those models as follows:
modprobe -r snd-hda-intel # remove driver
modprobe snd-hda-intel model=vaio # reload with model deffinitionTry both model deffinitions to see which works better for you. Report back your results and we'll get it added.
Thanks,
Quoted 28 lines
Quoted 7 lines
Quoted 7 lines
Tobin Davis
Quoted 3 lines · On Mon, 2007-01-22 at 22:22 +0100, [email protected] wrote:
Hi
I can't have any sound on my sony VAIO vgx-xl100 system with the
1.0.14rc2
Quoted 20 lines
Quoted 19 lines
Quoted 18 lines
build on a 2.6.18 kernel (debian)
the output of lspci -nv is :
00:1b.0 0403: 8086:27d8 (rev 01)
Subsystem: 104d:81f7 Flags: bus master, fast devsel, latency 0, IRQ 169 Memory at fdff8000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied>dmesg gives :
ACPI: PCI interrupt for device 0000:00:1b.0 disabled
PCI: Enabling device 0000:00:1b.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1b.0 to 64 ALSA
Quoted 5 lines
___________________________________________________________________________
Découvrez une nouvelle façon d'obtenir des réponses à toutes vos questions !
Profitez des connaissances, des opinions et des expériences des internautes sur Yahoo! Questions/Réponses
http://fr.answers.yahoo.com
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
What i have tested :
using aplay or any other player do not give any sound, with or without the model option.
e.g. aplay /usr/lib/openoffice/share/gallery/sounds/gong.wav do not give any sound in my speakers
The mixer changes when i force the model :
without "model" option : only "master" and "pcm" playback exist with "vaio" option, one "capture device appears, with 2 parameters : line-in and microphone
with "vaio-ar", two more capture devices appear : line-in and microphone.
The "master" and "pcm" device are not muted.
Is there anoter parameter i missed to unmute the sound ?
Jean-Marc
Quoted 12 lines · --- Takashi Iwai
At Thu, 25 Jan 2007 23:20:22 +0100 (CET),
Quoted 9 lines · <[email protected]> wrote:
When i force model "vaio" dmesg gives :
ACPI: PCI interrupt for device 0000:00:1b.0 disabled
PCI: Enabling device 0000:00:1b.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1b.0 to 64 ALSA
/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_intel.c:696:
Quoted 14 lines
Quoted 2 lines
codec_mask=0x1
ALSA/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/hda_codec.c:1739:
hda_codec:Quoted 10 lines
model 'vaio' is selected
When i force "vaio-ar" :
ACPI: PCI interrupt for device 0000:00:1b.0 disabled
PCI: Enabling device 0000:00:1b.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1b.0 to 64 ALSA
/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_intel.c:696:
Quoted 7 lines
Quoted 2 lines
codec_mask=0x1
ALSA/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/hda_codec.c:1739:
hda_codec:Quoted 3 lines
model 'vaio-ar' is selected
What other information so you need ?
Quoted 7 lines
The facts: What did you test and didn't work as expected?
Note that the mixer appearance should be different from the state without model option.
Takashi
___________________________________________________________________________
Découvrez une nouvelle façon d'obtenir des réponses à toutes vos questions !
Profitez des connaissances, des opinions et des expériences des internautes sur Yahoo! Questions/Réponses
http://fr.answers.yahoo.com
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV