ALC880 on medion laptop
Hi,
After the recent success-story with the alsa-cvs drivers (now the sound is OK for playing and the output speakers are ok) I decided to do some more tests. Good news:
for playing, everything is ok, the mixer entries correspond to the output jacks and the internal speakers are muted automatically when I plug a jack on headphone or Front. This is the best behavihour IMHO. One remark : I have a "LFE" (??) output on the alsa-mixer and I don't know wtf... (I havn't a corresponding jack).
I must note that I havn't tested the IEC958 output since I have no compatible device to plug.
Now the bad news:
Recording is completly out of order :(
The laptop owns 2 inputs: mic & line in (labeled audio in) The mixer gives me 6 controls for recording:
In capture:
Capture, Capture 1, Capture 2
In playback:
Input source, Input source 1, Input source 2 which are multi-choice over Mic, Front Mic, Line, CD
I can't get any sound from line in, from mic I can see a concordance between the recorded sound and my voice but it's rather strange. [recorded sample file joined]
The sound is *very* noisy and when I speek I can hear a louder noise, nothing more.
Is it a known problem ?
I hope solutions will be found as for playback, previous results are very encouraging.
Thanks all.
Fabien Devaux
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
Quoted 29 lines · fab
Hi,
After the recent success-story with the alsa-cvs drivers (now the sound is OK for playing and the output speakers are ok) I decided to do some more tests. Good news:
for playing, everything is ok, the mixer entries correspond to the output jacks and the internal speakers are muted automatically when I plug a jack on headphone or Front. This is the best behavihour IMHO. One remark : I have a "LFE" (??) output on the alsa-mixer and I don't know wtf... (I havn't a corresponding jack).
I must note that I havn't tested the IEC958 output since I have no compatible device to plug.Now the bad news:
Recording is completly out of order :(
The laptop owns 2 inputs: mic & line in (labeled audio in) The mixer gives me 6 controls for recording:
In capture:
Capture, Capture 1, Capture 2In playback:
Input source, Input source 1, Input source 2 which are multi-choice over Mic, Front Mic, Line, CDI can't get any sound from line in, from mic I can see a concordance between the recorded sound and my voice but it's rather strange. [recorded sample file joined]
The sound is *very* noisy and when I speek I can hear a louder noise, nothing more.
Quoted 7 lines
Is it a known problem ?
I hope solutions will be found as for playback, previous results are very encouraging.Thanks all.
Fabien Devaux
Oups, the sample recording is here:
http://fab.gnux.info/divers/rec.ogg
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
At Sun, 26 Jun 2005 18:26:29 +0200,
Quoted 10 lines · fab
Hi,
After the recent success-story with the alsa-cvs drivers (now the sound is OK for playing and the output speakers are ok) I decided to do some more tests. Good news:
for playing, everything is ok, the mixer entries correspond to the output jacks and the internal speakers are muted automatically when I plug a jack on headphone or Front. This is the best behavihour IMHO. One remark : I have a "LFE" (??) output on the alsa-mixer and I don't know wtf... (I havn't a corresponding jack).
It's so-called "sub-woofer".
Quoted 14 lines
I must note that I havn't tested the IEC958 output since I have no compatible device to plug.
Now the bad news:
Recording is completly out of order :(
The laptop owns 2 inputs: mic & line in (labeled audio in) The mixer gives me 6 controls for recording:
In capture:
Capture, Capture 1, Capture 2In playback:
Input source, Input source 1, Input source 2 which are multi-choice over Mic, Front Mic, Line, CD
Quoted 7 lines
I can't get any sound from line in, from mic I can see a concordance between the recorded sound and my voice but it's rather strange. [recorded sample file joined]
The sound is *very* noisy and when I speek I can hear a louder noise, nothing more.Is it a known problem ?
Not for me.
Could you elaborate how did you record (together with the asound.state)?
Takashi
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
A message that is not in the archive (sent off-list or not yet received): [email protected]
At Mon, 27 Jun 2005 18:05:56 +0200,
Quoted 27 lines · fab
Quoted 2 lines
It's so-called "sub-woofer".
ok, I don't have such a jack...
Quoted 22 lines
Quoted 21 lines
I must note that I havn't tested the IEC958 output since I have no compatible device to plug.
Now the bad news:
Recording is completly out of order :(
The laptop owns 2 inputs: mic & line in (labeled audio in) The mixer gives me 6 controls for recording:
In capture:
Capture, Capture 1, Capture 2In playback:
Input source, Input source 1, Input source 2 which are multi-choice over Mic, Front Mic, Line, CDI can't get any sound from line in, from mic I can see a concordance between the recorded sound and my voice but it's rather strange. [recorded sample file joined]
The sound is *very* noisy and when I speek I can hear a louder noise, nothing more.Is it a known problem ?
Quoted 7 lines
Quoted 4 lines
Not for me.
Could you elaborate how did you record (together with the asound.state)?
ok, I can describe you the alsamixer values but I don't know how to give you the "asound.state" (I searched /proc & /sys for it).
I meant "how did you record". Which program did you use with what parameters?
/etc/asound.state is generated after you call "alsactl store" as root. This is done usually by alsasound init script. You can do "alsactl -f test.state store" as a normal user, too.
Takashi
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
A message that is not in the archive (sent off-list or not yet received): [email protected]
At Mon, 27 Jun 2005 18:23:23 +0200,
Quoted 10 lines · fab
[1 <text/plain; us-ascii (7bit)>]
Quoted 5 lines
Quoted 2 lines
ok, I can describe you the alsamixer values but I don't know how to give you the "asound.state" (I searched /proc & /sys for it).
I meant "how did you record". Which program did you use with what parameters?
oh ok, I used audacity (I use it on various computers without issues). I can try with other applications if you want.
For the primary testing, use arecord to eliminate unknown factors. For example,
% arecord -fcd foo.wav
for 44.1kHz or
% arecord -fdat foo.wav
for 48kHz.
If you get noises, try -Dplughw:0 option to skip dsnoop plugin.
Quoted 8 lines
Quoted 3 lines
/etc/asound.stateis generated after you call "alsactl store" as root. This is done usually by alsasound init script. You can do "alsactl -f test.state store" as a normal user, too.Ok, here is the file.
[2 test.state <text/plain; us-ascii (7bit)>]
state.Intel {
(snip)
Quoted 10 lines
control.10 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 35'
iface MIXER
name 'Capture Volume'
value.0 0
value.1 0
}You didn't set this volume. Raise "Capture" volume in alsamixer (press [F4] to move to capture view mode).
Quoted 4 lines
control.16 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
Quoted 8 lines
comment.item.0 Mic
comment.item.1 'Front Mic'
comment.item.2 Line
comment.item.3 CD
iface MIXER
name 'Input Source'
value Mic
}
So, the input comes from the microphone.
I'm not sure whether it's connected from front-mic or mic on your device.
Takashi
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
A message that is not in the archive (sent off-list or not yet received): [email protected]
At Mon, 27 Jun 2005 19:43:56 +0200,
Quoted 8 lines · fab
Quoted 8 lines
For the primary testing, use arecord to eliminate unknown factors. For example,
% arecord -fcd foo.wav
for 44.1kHz or
Quoted 7 lines
Quoted 4 lines
% arecord -fdat foo.wav
for 48kHz.
If you get noises, try -Dplughw:0 option to skip dsnoop plugin.tried with and without -Dplughw:0, same outpout (as in audacity).
OK, but keep using arecord for tests.
Quoted 10 lines
Quoted 2 lines
You didn't set this volume. Raise "Capture" volume in alsamixer (press [F4] to move to capture view mode).
Heh, When I did my tests I raised the volume :)
Quoted 3 lines
So, the input comes from the microphone.
I'm not sure whether it's connected from front-mic or mic on your device.When I record from front-mic I event don't hear noise.
And how about Line-In?
Takashi
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click