Skip to contentSkip to conversation

ALC880 on medion laptop

DISCUSSION fab 2 participants 6 messages Jun 26, 2005 – Jun 27, 2005 3 messages not in the archive

lore
Share & tools
lore

fab

author
#0 lore raw

Hi,
After the recent success-story with the alsa-cvs drivers (now the sound is OK for playing and the output speakers are ok) I decided to do some more tests. Good news:
for playing, everything is ok, the mixer entries correspond to the output jacks and the internal speakers are muted automatically when I plug a jack on headphone or Front. This is the best behavihour IMHO. One remark : I have a "LFE" (??) output on the alsa-mixer and I don't know wtf... (I havn't a corresponding jack).
I must note that I havn't tested the IEC958 output since I have no compatible device to plug.

Now the bad news:
Recording is completly out of order :(
The laptop owns 2 inputs: mic & line in (labeled audio in) The mixer gives me 6 controls for recording:
In capture:
Capture, Capture 1, Capture 2

In playback:
Input source, Input source 1, Input source 2 which are multi-choice over Mic, Front Mic, Line, CD

I can't get any sound from line in, from mic I can see a concordance between the recorded sound and my voice but it's rather strange. [recorded sample file joined]
The sound is *very* noisy and when I speek I can hear a louder noise, nothing more.

Is it a known problem ?
I hope solutions will be found as for playback, previous results are very encouraging.

Thanks all.

Fabien Devaux

-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click

author
#1 lore raw
Quoted 29 lines · fab

Hi,
After the recent success-story with the alsa-cvs drivers (now the sound is OK for playing and the output speakers are ok) I decided to do some more tests. Good news:
for playing, everything is ok, the mixer entries correspond to the output jacks and the internal speakers are muted automatically when I plug a jack on headphone or Front. This is the best behavihour IMHO. One remark : I have a "LFE" (??) output on the alsa-mixer and I don't know wtf... (I havn't a corresponding jack).
I must note that I havn't tested the IEC958 output since I have no compatible device to plug.

Now the bad news:
Recording is completly out of order :(
The laptop owns 2 inputs: mic & line in (labeled audio in) The mixer gives me 6 controls for recording:
In capture:
Capture, Capture 1, Capture 2

In playback:
Input source, Input source 1, Input source 2 which are multi-choice over Mic, Front Mic, Line, CD

I can't get any sound from line in, from mic I can see a concordance between the recorded sound and my voice but it's rather strange. [recorded sample file joined]
The sound is *very* noisy and when I speek I can hear a louder noise, nothing more.

Quoted 7 lines

Is it a known problem ?
I hope solutions will be found as for playback, previous results are very encouraging.

Thanks all.

Fabien Devaux

Oups, the sample recording is here:
http://fab.gnux.info/divers/rec.ogg

-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click

#2 lore raw
In reply to fab

At Sun, 26 Jun 2005 18:26:29 +0200,

Quoted 10 lines · fab

Hi,
After the recent success-story with the alsa-cvs drivers (now the sound is OK for playing and the output speakers are ok) I decided to do some more tests. Good news:
for playing, everything is ok, the mixer entries correspond to the output jacks and the internal speakers are muted automatically when I plug a jack on headphone or Front. This is the best behavihour IMHO. One remark : I have a "LFE" (??) output on the alsa-mixer and I don't know wtf... (I havn't a corresponding jack).

It's so-called "sub-woofer".

Quoted 14 lines

I must note that I havn't tested the IEC958 output since I have no compatible device to plug.

Now the bad news:
Recording is completly out of order :(
The laptop owns 2 inputs: mic & line in (labeled audio in) The mixer gives me 6 controls for recording:
In capture:
Capture, Capture 1, Capture 2

In playback:
Input source, Input source 1, Input source 2 which are multi-choice over Mic, Front Mic, Line, CD

Quoted 7 lines

I can't get any sound from line in, from mic I can see a concordance between the recorded sound and my voice but it's rather strange. [recorded sample file joined]
The sound is *very* noisy and when I speek I can hear a louder noise, nothing more.

Is it a known problem ?

Not for me.

Could you elaborate how did you record (together with the asound.state)?

Takashi

-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click

A message that is not in the archive (sent off-list or not yet received): [email protected]

#4 lore raw

At Mon, 27 Jun 2005 18:05:56 +0200,

Quoted 27 lines · fab
Quoted 2 lines

It's so-called "sub-woofer".

ok, I don't have such a jack...

Quoted 22 lines
Quoted 21 lines

I must note that I havn't tested the IEC958 output since I have no compatible device to plug.

Now the bad news:
Recording is completly out of order :(
The laptop owns 2 inputs: mic & line in (labeled audio in) The mixer gives me 6 controls for recording:
In capture:
Capture, Capture 1, Capture 2

In playback:
Input source, Input source 1, Input source 2 which are multi-choice over Mic, Front Mic, Line, CD

I can't get any sound from line in, from mic I can see a concordance between the recorded sound and my voice but it's rather strange. [recorded sample file joined]
The sound is *very* noisy and when I speek I can hear a louder noise, nothing more.

Is it a known problem ?

Quoted 7 lines
Quoted 4 lines

Not for me.

Could you elaborate how did you record (together with the asound.state)?

ok, I can describe you the alsamixer values but I don't know how to give you the "asound.state" (I searched /proc & /sys for it).

I meant "how did you record". Which program did you use with what parameters?

/etc/asound.state is generated after you call "alsactl store" as root. This is done usually by alsasound init script. You can do "alsactl -f test.state store" as a normal user, too.

Takashi

-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click

A message that is not in the archive (sent off-list or not yet received): [email protected]

#6 lore raw

At Mon, 27 Jun 2005 18:23:23 +0200,

Quoted 10 lines · fab

[1 <text/plain; us-ascii (7bit)>]

Quoted 5 lines
Quoted 2 lines

ok, I can describe you the alsamixer values but I don't know how to give you the "asound.state" (I searched /proc & /sys for it).

I meant "how did you record". Which program did you use with what parameters?

oh ok, I used audacity (I use it on various computers without issues). I can try with other applications if you want.

For the primary testing, use arecord to eliminate unknown factors. For example,

% arecord -fcd foo.wav

for 44.1kHz or

% arecord -fdat foo.wav

for 48kHz.
If you get noises, try -Dplughw:0 option to skip dsnoop plugin.

Quoted 8 lines
Quoted 3 lines

/etc/asound.state is generated after you call "alsactl store" as root. This is done usually by alsasound init script. You can do "alsactl -f test.state store" as a normal user, too.

Ok, here is the file.

[2 test.state <text/plain; us-ascii (7bit)>]
state.Intel {

(snip)

Quoted 10 lines
	control.10 {
		comment.access 'read write'
		comment.type INTEGER
		comment.count 2
		comment.range '0 - 35'
		iface MIXER
		name 'Capture Volume'
		value.0 0
		value.1 0
	}

You didn't set this volume. Raise "Capture" volume in alsamixer (press [F4] to move to capture view mode).

Quoted 4 lines

control.16 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1

Quoted 8 lines

comment.item.0 Mic
comment.item.1 'Front Mic'
comment.item.2 Line
comment.item.3 CD
iface MIXER
name 'Input Source'
value Mic
}

So, the input comes from the microphone.
I'm not sure whether it's connected from front-mic or mic on your device.

Takashi

-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click

A message that is not in the archive (sent off-list or not yet received): [email protected]

#8 lore raw

At Mon, 27 Jun 2005 19:43:56 +0200,

Quoted 8 lines · fab
Quoted 8 lines

For the primary testing, use arecord to eliminate unknown factors. For example,

% arecord -fcd foo.wav

for 44.1kHz or

Quoted 7 lines
Quoted 4 lines

% arecord -fdat foo.wav

for 48kHz.
If you get noises, try -Dplughw:0 option to skip dsnoop plugin.

tried with and without -Dplughw:0, same outpout (as in audacity).

OK, but keep using arecord for tests.

Quoted 10 lines
Quoted 2 lines

You didn't set this volume. Raise "Capture" volume in alsamixer (press [F4] to move to capture view mode).

Heh, When I did my tests I raised the volume :)

Quoted 3 lines

So, the input comes from the microphone.
I'm not sure whether it's connected from front-mic or mic on your device.

When I record from front-mic I event don't hear noise.

And how about Line-In?

Takashi

-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click