ASoC: Intel: byt-max98090: Add GPIO ACPI mapping table
Subsystems (3)
PATCH v2 1/1 ASoC: Intel: byt-max98090: Add GPIO ACPI mapping table
In order to make GPIO ACPI library stricter prepare users of gpiod_get_index() to correctly behave when there no mapping is provided by firmware.
Here we add explicit mapping between _CRS GpioIo() resources and their names used in the driver.
---
- update device node to which the mapping table is attached
- remove idx assignment to 0 (it's by default)
- add Nicolas' tag (sent privately)
sound/soc/intel/boards/byt-max98090.c | 24 ++++++++++++++++++------ 1 file changed, 18 insertions(+), 6 deletions(-)
sound/soc/intel/boards/byt-max98090.c +18 -6
@@ -67,20 +67,27 @@ static struct snd_soc_jack_pin hs_jack_pins[] = {static struct snd_soc_jack_gpio hs_jack_gpios[] = { { - .name ="hp-gpio" , - .idx =0 , + .name ="hp" , .report =SND_JACK_HEADPHONE |SND_JACK_LINEOUT , .debounce_time =200 , }, { - .name ="mic-gpio" , - .idx =1 , + .name ="mic" , .invert =1 , .report =SND_JACK_MICROPHONE , .debounce_time =200 , }, }; +static const struct acpi_gpio_params hp_gpios = {0 ,0 , false }; +static const struct acpi_gpio_params mic_gpios = {1 ,0 , false }; + +static const struct acpi_gpio_mapping acpi_byt_max98090_gpios[] = { + {"hp-gpios" , &hp_gpios,1 }, + {"mic-gpios" , &mic_gpios,1 }, + {}, +}; +static int byt_max98090_init (struct snd_soc_pcm_runtime *runtime) {int ret;
@@ -140,8 +147,9 @@ static struct snd_soc_card byt_max98090_card = {static int byt_max98090_probe (struct platform_device *pdev) { -int ret_val =0 ; +struct device *dev = &pdev->dev;struct byt_max98090_private *priv; +int ret_val; priv =devm_kzalloc (&pdev->dev,sizeof (*priv),GFP_ATOMIC );if (!priv) {
@@ -149,6 +157,10 @@ static int byt_max98090_probe(struct platform_device *pdev)return -ENOMEM ; } + ret_val =devm_acpi_dev_add_driver_gpios (dev->parent, acpi_byt_max98090_gpios); +if (ret_val) +dev_dbg (dev,"Unable to add GPIO mapping table\n" ); + byt_max98090_card.dev = &pdev->dev;snd_soc_card_set_drvdata (&byt_max98090_card, priv); ret_val =devm_snd_soc_register_card (&pdev->dev, &byt_max98090_card);
@@ -158,7 +170,7 @@ static int byt_max98090_probe(struct platform_device *pdev)return ret_val; } -return ret_val; +return 0 ; }static int byt_max98090_remove (struct platform_device *pdev)
Signature · 1 line
2.11.0
sound/soc/intel/boards/byt-max98090.c static struct snd_soc_jack_pin hs_jack_pins[] = { · line 87
Quoted 7 lines · Andy Shevchenko
sound/soc/intel/boards/byt-max98090.c +6
-0+static const struct acpi_gpio_params hp_gpios = {0 ,0 , false }; +static const struct acpi_gpio_params mic_gpios = {1 ,0 , false }; + +static const struct acpi_gpio_mapping acpi_byt_max98090_gpios[] = { + {"hp-gpios" , &hp_gpios,1 }, + {"mic-gpios" , &mic_gpios,1 },
Better to use C99 style init? I'm not always a fan of it, but this seems deserving. From the above, it's difficult to know which zero is for what.
thanks,
Takashi
Quoted 11 lines · Takashi Iwai
sound/soc/intel/boards/byt-max98090.c static struct snd_soc_jack_pin hs_jack_pins[] = { · line 87
Quoted 7 lines · Andy Shevchenko
sound/soc/intel/boards/byt-max98090.c +6
-0+static const struct acpi_gpio_params hp_gpios = {0 ,0 , false }; +static const struct acpi_gpio_params mic_gpios = {1 ,0 , false }; + +static const struct acpi_gpio_mapping acpi_byt_max98090_gpios[] = { + {"hp-gpios" , &hp_gpios,1 }, + {"mic-gpios" , &mic_gpios,1 },Better to use C99 style init?
Here it makes a little advantage over more uglified code.
Quoted 3 lines
I'm not always a fan of it, but this
seems deserving. From the above, it's difficult to know which zero is for what.
I'm not sure it makes sense. Those fields are filed according to ACPI specification and applies to the platform in question. Usually you don't need to look into them on regular basis, perhaps one time per each platform which uses such combination of SoC + ASoC + Codec which is quite unlikely to be more than once twice per year(?).
So, for over few dozens of drivers which are using GPIO ACPI mapping tables this is the first request like this I see.
Thus, if you insist, I can do it, but my vote is "it doesn't worth of doing it at all".
Signature · 6 lines
Andy Shevchenko <[email protected]> Intel Finland Oy _______________________________________________ Alsa-devel mailing list [email protected] http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Quoted 20 lines · Andy Shevchenko
Quoted 11 lines · Takashi Iwai
sound/soc/intel/boards/byt-max98090.c static struct snd_soc_jack_pin hs_jack_pins[] = { · line 87
Quoted 7 lines · Andy Shevchenko
sound/soc/intel/boards/byt-max98090.c +6
-0+static const struct acpi_gpio_params hp_gpios = {0 ,0 , false }; +static const struct acpi_gpio_params mic_gpios = {1 ,0 , false }; + +static const struct acpi_gpio_mapping acpi_byt_max98090_gpios[] = { + {"hp-gpios" , &hp_gpios,1 }, + {"mic-gpios" , &mic_gpios,1 },Better to use C99 style init?
Here it makes a little advantage over more uglified code.
Quoted 3 lines
I'm not always a fan of it, but this
seems deserving. From the above, it's difficult to know which zero is for what.
Quoted 8 lines
I'm not sure it makes sense. Those fields are filed according to ACPI specification and applies to the platform in question. Usually you don't need to look into them on regular basis, perhaps one time per each platform which uses such combination of SoC + ASoC + Codec which is quite unlikely to be more than once twice per year(?).
So, for over few dozens of drivers which are using GPIO ACPI mapping tables this is the first request like this I see.
It's a proof showing that people are just too lazy and copy the first implementation pattern :)
Quoted 2 lines
Thus, if you insist, I can do it, but my vote is "it doesn't worth of doing it at all".
Well, I'm not insisting to change that, but I still think that your argument is rather weak from the code quality POV.
The C99 style initialization is definitely an improvement for understanding the code. The most important question is not about how often changing the code, but about how better a reader can understand and how it give less errors.
It results in more lines? Yes. It's uglier? Depends. So what? It makes clearer and less error-prone.
Hrm, must I do that? No, it's still a kind of matter of taste.
thanks,
Takashi
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Quoted 43 lines · Takashi Iwai
Quoted 31 lines · Andy Shevchenko
Quoted 14 lines · Takashi Iwai
sound/soc/intel/boards/byt-max98090.c static struct snd_soc_jack_pin hs_jack_pins[] = { · line 87
Quoted 10 lines · Andy Shevchenko
+static const struct
acpi_gpio_paramshp_gpios= { 0, 0, false };
+static const structacpi_gpio_paramsmic_gpios= { 1, 0, false };(quoted diff) +2
-0+ +static const struct acpi_gpio_mapping acpi_byt_max98090_gpios[]= {
sound/soc/intel/boards/byt-max98090.c +2
-0+ { "hp-gpios", &hp_gpios, 1 }, + { "mic-gpios", &mic_gpios, 1 },Better to use C99 style init?
Here it makes a little advantage over more uglified code.
Quoted 4 lines
I'm not always a fan of it, but this
seems deserving. From the above, it's difficult to know which zero is
for what.I'm not sure it makes sense. Those fields are filed according to ACPI
specification and applies to the platform in question. Usually you don't
need to look into them on regular basis, perhaps one time per each platform which uses such combination of SoC + ASoC + Codec which is quite unlikely to be more than once twice per year(?).Quoted 2 lines
So, for over few dozens of drivers which are using GPIO ACPI mapping tables this is the first request like this I see.
It's a proof showing that people are just too lazy and copy the first implementation pattern :)
Quoted 3 lines
Thus, if you insist, I can do it, but my vote is "it doesn't worth of
doing it at all".
Quoted 7 lines
Well, I'm not insisting to change that, but I still think that your argument is rather weak from the code quality POV.
The C99 style initialization is definitely an improvement for understanding the code. The most important question is not about how often changing the code, but about how better a reader can understand and how it give less errors.
In general I certainly agree with you. In this particular case uglification vs. clearness not in the right balance (to me at least).
Quoted 2 lines
It results in more lines? Yes. It's uglier? Depends. So what? It makes clearer and less error-prone.
Again, above case one has to file all members no matter what, since it's a mapping and explicit better than implicit there. Taking above into consideration the C99 style just adds a noise here for my POV.
Quoted 1 line
Hrm, must I do that? No, it's still a kind of matter of taste.
So, let's agree not to touch this particular case(s)?
Signature · 6 lines
Andy Shevchenko <[email protected]> Intel Finland Oy _______________________________________________ Alsa-devel mailing list [email protected] http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Quoted 59 lines · Andy Shevchenko
Quoted 43 lines · Takashi Iwai
Quoted 31 lines · Andy Shevchenko
Quoted 14 lines · Takashi Iwai
sound/soc/intel/boards/byt-max98090.c static struct snd_soc_jack_pin hs_jack_pins[] = { · line 87
Quoted 10 lines · Andy Shevchenko
+static const struct
acpi_gpio_paramshp_gpios= { 0, 0, false };
+static const structacpi_gpio_paramsmic_gpios= { 1, 0, false };(quoted diff) +2
-0+ +static const struct acpi_gpio_mapping acpi_byt_max98090_gpios[]= {
sound/soc/intel/boards/byt-max98090.c +2
-0+ { "hp-gpios", &hp_gpios, 1 }, + { "mic-gpios", &mic_gpios, 1 },Better to use C99 style init?
Here it makes a little advantage over more uglified code.
Quoted 4 lines
I'm not always a fan of it, but this
seems deserving. From the above, it's difficult to know which zero is
for what.I'm not sure it makes sense. Those fields are filed according to ACPI
specification and applies to the platform in question. Usually you don't
need to look into them on regular basis, perhaps one time per each platform which uses such combination of SoC + ASoC + Codec which is quite unlikely to be more than once twice per year(?).Quoted 2 lines
So, for over few dozens of drivers which are using GPIO ACPI mapping tables this is the first request like this I see.
It's a proof showing that people are just too lazy and copy the first implementation pattern :)
Quoted 3 lines
Thus, if you insist, I can do it, but my vote is "it doesn't worth of
doing it at all".Quoted 7 lines
Well, I'm not insisting to change that, but I still think that your argument is rather weak from the code quality POV.
The C99 style initialization is definitely an improvement for understanding the code. The most important question is not about how often changing the code, but about how better a reader can understand and how it give less errors.
In general I certainly agree with you. In this particular case uglification vs. clearness not in the right balance (to me at least).
Quoted 2 lines
It results in more lines? Yes. It's uglier? Depends. So what? It makes clearer and less error-prone.
Quoted 7 lines
Again, above case one has to file all members no matter what, since it's a mapping and explicit better than implicit there. Taking above into consideration the C99 style just adds a noise here for my POV.
Quoted 1 line
Hrm, must I do that? No, it's still a kind of matter of taste.
So, let's agree not to touch this particular case(s)?
Yeah, that implies it, I don't mind too much details.
thanks,
Takashi
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Quoted 4 lines · Takashi Iwai
Quoted 2 lines · Andy Shevchenko
On Sun, 2017-06-11 at 18:48 +0200, Takashi Iwai wrote:
Quoted 9 lines
Quoted 6 lines
Quoted 4 lines
On Sun, 11 Jun 2017 16:01:13 +0200,
Andy Shevchenko wrote:Hrm, must I do that? No, it's still a kind of matter of taste.
So, let's agree not to touch this particular case(s)?
Yeah, that implies it, I don't mind too much details.
Good.
Thanks for review!
Signature · 6 lines
Andy Shevchenko <[email protected]> Intel Finland Oy _______________________________________________ Alsa-devel mailing list [email protected] http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Quoted 7 lines · Andy Shevchenko
In order to make GPIO ACPI library stricter prepare users of
gpiod_get_index()to correctly behave when there no mapping is provided by firmware.Here we add explicit mapping between
_CRSGpioIo()resources and their names used in the driver.
Mark, we agreed with Takashi that the patch is okay in its initial form. Should I resend it, or maybe you can take it from this thread?
Quoted 83 lines
Reviewed-by Dmitry Torokhov <[email protected]>Tested-by Nicolas Porcel <[email protected]>Signed-off-by Andy Shevchenko <[email protected]>---
- update device node to which the mapping table is attached
- remove idx assignment to 0 (it's by default)
- add Nicolas' tag (sent privately)sound/soc/intel/boards/byt-max98090.c| 24 ++++++++++++++++++------1 file changed, 18 insertions(+), 6 deletions(-)sound/soc/intel/boards/byt-max98090.c +0
-0@@ -67,20 +67,27 @@ static struct snd_soc_jack_pin hs_jack_pins[] = {
static structsnd_soc_jack_gpiohs_jack_gpios[] = { {sound/soc/intel/boards/byt-max98090.c +1
-2- .name = "hp-gpio", - .idx = 0, + .name = "hp",.report =
SND_JACK_HEADPHONE|SND_JACK_LINEOUT,
.debounce_time = 200,
},
{sound/soc/intel/boards/byt-max98090.c +1
-2- .name = "mic-gpio", - .idx = 1, + .name = "mic",.invert = 1,
.report =SND_JACK_MICROPHONE,
.debounce_time = 200,
},
};sound/soc/intel/boards/byt-max98090.c +9
-0+static const struct acpi_gpio_params hp_gpios = {0 ,0 , false }; +static const struct acpi_gpio_params mic_gpios = {1 ,0 , false }; + +static const struct acpi_gpio_mapping acpi_byt_max98090_gpios[] = { + {"hp-gpios" , &hp_gpios,1 }, + {"mic-gpios" , &mic_gpios,1 }, + {}, +}; +static int
byt_max98090_init(struct snd_soc_pcm_runtime *runtime){
int ret;sound/soc/intel/boards/byt-max98090.c +0
-0@@ -140,8 +147,9 @@ static struct snd_soc_card byt_max98090_card = {
static intbyt_max98090_probe(struct platform_device *pdev){sound/soc/intel/boards/byt-max98090.c +1
-1-int ret_val =0 ; +struct device *dev = &pdev->dev;struct
byt_max98090_private*priv;sound/soc/intel/boards/byt-max98090.c +1
-0+int ret_val;
priv =devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_ATOMIC); if (!priv) {sound/soc/intel/boards/byt-max98090.c +0
-0@@ -149,6 +157,10 @@ static int byt_max98090_probe(struct platform_device *pdev) return -ENOMEM; }sound/soc/intel/boards/byt-max98090.c +1
-0+ ret_val = devm_acpi_dev_add_driver_gpios(dev->parent,
acpi_byt_max98090_gpios);sound/soc/intel/boards/byt-max98090.c +3
-0+if (ret_val) +dev_dbg (dev,"Unable to add GPIO mapping table\n" ); +byt_max98090_card.dev =
&pdev->dev;snd_soc_card_set_drvdata(&byt_max98090_card, priv);ret_val=devm_snd_soc_register_card(&pdev->dev, &byt_max98090_card);sound/soc/intel/boards/byt-max98090.c +0
-0@@ -158,7 +170,7 @@ static int byt_max98090_probe(struct platform_device *pdev) return ret_val; }sound/soc/intel/boards/byt-max98090.c +1
-1-return ret_val; +return 0 ;}
static intbyt_max98090_remove(struct platform_device *pdev)
Signature · 6 lines
Andy Shevchenko <[email protected]> Intel Finland Oy _______________________________________________ Alsa-devel mailing list [email protected] http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Mark Brown
maintainerApplied "ASoC: Intel: byt-max98090: Add GPIO ACPI mapping table" to the asoc tree
In reply to Andy ShevchenkoThe patch
ASoC: Intel: byt-max98090: Add GPIO ACPI mapping table
has been applied to the asoc tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark
Quoted 1 line
From
7c197881e163f34679b941c75500a6c85560b7c9Mon Sep 17 00:00:00 2001
From: Andy Shevchenko <[email protected]>
Date: Sat, 10 Jun 2017 19:37:41 +0300
Subject: [PATCH] ASoC: Intel: byt-max98090: Add GPIO ACPI mapping table
In order to make GPIO ACPI library stricter prepare users of gpiod_get_index() to correctly behave when there no mapping is provided by firmware.
Here we add explicit mapping between _CRS GpioIo() resources and their names used in the driver.
--- sound/soc/intel/boards/byt-max98090.c | 24 ++++++++++++++++++------ 1 file changed, 18 insertions(+), 6 deletions(-)
sound/soc/intel/boards/byt-max98090.c +18 -6
@@ -67,20 +67,27 @@ static struct snd_soc_jack_pin hs_jack_pins[] = {static struct snd_soc_jack_gpio hs_jack_gpios[] = { { - .name ="hp-gpio" , - .idx =0 , + .name ="hp" , .report =SND_JACK_HEADPHONE |SND_JACK_LINEOUT , .debounce_time =200 , }, { - .name ="mic-gpio" , - .idx =1 , + .name ="mic" , .invert =1 , .report =SND_JACK_MICROPHONE , .debounce_time =200 , }, }; +static const struct acpi_gpio_params hp_gpios = {0 ,0 , false }; +static const struct acpi_gpio_params mic_gpios = {1 ,0 , false }; + +static const struct acpi_gpio_mapping acpi_byt_max98090_gpios[] = { + {"hp-gpios" , &hp_gpios,1 }, + {"mic-gpios" , &mic_gpios,1 }, + {}, +}; +static int byt_max98090_init (struct snd_soc_pcm_runtime *runtime) {int ret;
@@ -140,8 +147,9 @@ static struct snd_soc_card byt_max98090_card = {static int byt_max98090_probe (struct platform_device *pdev) { -int ret_val =0 ; +struct device *dev = &pdev->dev;struct byt_max98090_private *priv; +int ret_val; priv =devm_kzalloc (&pdev->dev,sizeof (*priv),GFP_ATOMIC );if (!priv) {
@@ -149,6 +157,10 @@ static int byt_max98090_probe(struct platform_device *pdev)return -ENOMEM ; } + ret_val =devm_acpi_dev_add_driver_gpios (dev->parent, acpi_byt_max98090_gpios); +if (ret_val) +dev_dbg (dev,"Unable to add GPIO mapping table\n" ); + byt_max98090_card.dev = &pdev->dev;snd_soc_card_set_drvdata (&byt_max98090_card, priv); ret_val =devm_snd_soc_register_card (&pdev->dev, &byt_max98090_card);
@@ -158,7 +170,7 @@ static int byt_max98090_probe(struct platform_device *pdev)return ret_val; } -return ret_val; +return 0 ; }static int byt_max98090_remove (struct platform_device *pdev)
Signature · 1 line
2.11.0