Grey noise with HDA Intel PCH
Hello,
when having my soundcard not muted, I get to hear grey noise over the speakers or over the headphone, depending if I have a headphone plugged in or not. I did not experience this constant hearing of grey noise under Windows, so I suspect, that their is some problem with the linux driver but I do not have any idea, what it could be. Therefore, I attached the alsa-info.sh output, maybe that could give somebody a clue.
Thank you for your time, with best regards,
Julian Wollrath
alsa-info.sh Output:
!!################################
!!ALSA Information Script v 0.4.63
!!################################
!!Script ran on: Thu Aug 14 09:16:55 UTC 2014
!!Linux Distribution
!!------------------
Debian GNU/Linux jessie/sid \n \l PRETTY_NAME="Debian GNU/Linux jessie/sid" NAME="Debian GNU/Linux" ID=debian HOME_URL="http://www.debian.org/" SUPPORT_URL="http://www.debian.org/support/" BUG_REPORT_URL="https://bugs.debian.org/"
!!DMI Information
!!---------------
Manufacturer: LENOVO Product Name: 23250BM Product Version: ThinkPad X230 Firmware Version: G2ETA1WW (2.61 )
!!Kernel Information
!!------------------
Kernel release: 3.16.1 Operating System: GNU/Linux Architecture: x86_64 Processor: unknown SMP Enabled: Yes
!!ALSA Version
!!------------
Driver version: k3.16.1 Library version: 1.0.28 Utilities version: 1.0.28
!!Loaded ALSA modules
!!-------------------
snd_hda_intelthinkpad_acpi
!!Sound Servers on this system
!!----------------------------
No sound servers found.
!!Soundcards recognised by ALSA
!!-----------------------------
0 [PCH ]: HDA-Intel - HDA Intel PCH
HDA Intel PCH at 0xf2530000 irq 45
29 [ThinkPadEC ]: ThinkPad EC - ThinkPad Console Audio Control
ThinkPad Console Audio Control at EC reg 0x30, fwunknown
!!PCI Soundcards installed in the system
!!--------------------------------------
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
!!Advanced information - PCI Vendor/Device/Subsystem ID's !!-------------------------------------------------------
00:1b.0 0403: 8086:1e20 (rev 04)
Subsystem: 17aa:21fa
!!Modprobe options (Sound related)
!!--------------------------------
snd_pcsp: index=-2snd_usb_audio: index=-2snd_atiixp_modem: index=-2snd_intel8x0m: index=-2snd_via82xx_modem: index=-2
!!Loaded sound module options
!!---------------------------
!!Module: snd_hda_intel
align_buffer_size : -1
bdl_pos_adj :
1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1beep_mode :
Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
enable :
Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Yenable_msi : -1 id :
(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) index :
-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1jackpoll_ms :
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 model :
(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) patch :
(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) position_fix :
-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1power_save : 1 power_save_controller : Y probe_mask :
-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1probe_only :
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0single_cmd : N snoop : Y
!!Module: thinkpad_acpi
brightness_enable : 2
brightness_mode : 4
enable : Y
experimental : 0
fan_control : N
force_load : N
id : ThinkPadEC
index : -536870912
volume_capabilities : 0
volume_control : N
volume_mode : 3
!!HDA-Intel Codec information
!!---------------------------
--startcollapse--
Codec: Realtek ALC269VC
Address: 0
AFG Function Id: 0x1 (unsol 1)
Vendor Id: 0x10ec0269
Subsystem Id: 0x17aa21fa
Revision Id: 0x100203
No Modem Function Group found
Default PCM:
rates [0x5f0]: 32000 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCMDefault Amp-In caps: N/A
Default Amp-Out caps: N/A
State of AFG node 0x01:
Power states: D0 D1 D2 D3 CLKSTOP EPSS
Power: setting=D0, actual=D0
GPIO: io=2, o=0, i=0, unsolicited=1, wake=0
IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Control: name="Speaker Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Device: name="ALC269VC Analog", type="Audio", device=0
Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0
Amp-Out vals: [0x13 0x13]
Converter: stream=8, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Control: name="Headphone Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0
Amp-Out vals: [0x13 0x13]
Converter: stream=8, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x04 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x05 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x06 [Audio Output] wcaps 0x611: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0x5f0]: 32000 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x08 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1 Amp-In vals: [0x97 0x97]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1
0x23
Node 0x09 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Control: name="Capture Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Capture Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Device: name="ALC269VC Analog", type="Audio", device=0
Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1
Amp-In vals: [0xbf 0xbf]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1
0x22
Node 0x0a [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Control: name="Mic Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Mic Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Dock Mic Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=1, ofs=0
Control: name="Dock Mic Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=1, ofs=0
Control: name="Beep Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=4, ofs=0
Control: name="Beep Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=4, ofs=0
Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80
0x80] Connection: 5
0x18 0x19 0x1a 0x1b 0x1dNode 0x0c [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00]
Connection: 2
0x02 0x0b
Node 0x0d [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00]
Connection: 2
0x03 0x0b
Node 0x0e [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x0f [Audio Mixer] wcaps 0x20010a: Mono Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00] [0x80]
Connection: 2
0x02 0x0b
Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x12 [Pin Complex] wcaps 0x40040b: Stereo Amp-In
Control: name="Internal Mic Boost Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Internal Mic Phantom Jack", index=0, device=0 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00]
Pincap 0x00000020: IN
Pin Default 0x90a60140: [Fixed] Mic at Int N/A
Conn = Digital, Color = Unknown
DefAssociation = 0x4, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x14 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Control: name="Speaker Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Speaker Phantom Jack", index=0, device=0
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x00010014: OUT EAPD Detect
EAPD 0x2: EAPD
Pin Default 0x90170110: [Fixed] Speaker at Int N/A
Conn = Analog, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 2
0x0c* 0x0d
Node 0x15 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Control: name="Headphone Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Headphone Jack", index=0, device=0
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x0001001c: OUT HP EAPD Detect
EAPD 0x2: EAPD
Pin Default 0x03211020: [Jack] HP Out at Ext Left
Conn = 1/8, Color = Black
DefAssociation = 0x2, Sequence = 0x0
Pin-ctls: 0xc0: OUT HP
Unsolicited: tag=01, enabled=1
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 2
0x0c 0x0d*Node 0x16 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x17 [Pin Complex] wcaps 0x40050c: Mono Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80]
Pincap 0x00000010: OUT
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1
0x0f
Node 0x18 [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out
Control: name="Mic Boost Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Mic Jack", index=0, device=0
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x00003734: IN OUT Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x03a11830: [Jack] Mic at Ext Left
Conn = 1/8, Color = Black
DefAssociation = 0x3, Sequence = 0x0
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=04, enabled=1
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 2
0x0c* 0x0d
Node 0x19 [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out
Control: name="Dock Mic Boost Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Dock Mic Jack", index=0, device=0
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x00003734: IN OUT Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=03, enabled=1
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 2
0x0c* 0x0dNode 0x1a [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80]
Pincap 0x0000373c: IN OUT HP Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN VREF_HIZ
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 2
0x0c* 0x0d
Node 0x1b [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out
Control: name="Headphone Playback Switch", index=1, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Dock Headphone Jack", index=0, device=0
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x00003734: IN OUT Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT VREF_HIZ
Unsolicited: tag=02, enabled=1
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 2
0x0c 0x0d*Node 0x1c [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x1d [Pin Complex] wcaps 0x400400: Mono
Pincap 0x00000020: IN
Pin Default 0x40138205: [N/A] Speaker at Ext N/A
Conn = ATAPI, Color = Purple DefAssociation = 0x0, Sequence = 0x5
Pin-ctls: 0x20: IN
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x1e [Pin Complex] wcaps 0x400781: Stereo Digital
Pincap 0x00000014: OUT Detect
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1
0x06
Node 0x1f [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
Processing caps: benign=0, ncoeff=37
Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x22 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x800x80] [0x80 0x80] [0x00 0x00] Connection: 7
0x18 0x19 0x1a 0x1b 0x1d 0x0b 0x12
Node 0x23 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x800x80] [0x80 0x80] Connection: 6
0x18 0x19 0x1a 0x1b 0x1d 0x0b
Codec: Intel PantherPoint HDMI
Address: 3
AFG Function Id: 0x1 (unsol 0)
Vendor Id: 0x80862806
Subsystem Id: 0x80860101
Revision Id: 0x100000
No Modem Function Group found
Default PCM:
rates [0x0]:
bits [0x0]:
formats [0x0]:Default Amp-In caps: N/A
Default Amp-Out caps: N/A
State of AFG node 0x01:
Power states: D0 D3 CLKSTOP EPSS
Power: setting=D0, actual=D0, Clock-stop-OK
GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
Node 0x02 [Audio Output] wcaps 0x6611: 8-Channels Digital
Converter: stream=0, channel=0
Digital: Enabled
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
bits [0x1e]: 16 20 24 32
formats [0x5]: PCM AC3 Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Node 0x03 [Audio Output] wcaps 0x6611: 8-Channels Digital
Converter: stream=0, channel=0
Digital: Enabled
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
bits [0x1e]: 16 20 24 32
formats [0x5]: PCM AC3 Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Node 0x04 [Audio Output] wcaps 0x6611: 8-Channels Digital
Converter: stream=0, channel=0
Digital: Enabled
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
bits [0x1e]: 16 20 24 32
formats [0x5]: PCM AC3 Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Node 0x05 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
Control: name="HDMI/DP,pcm=3 Jack", index=0, device=0
Control: name="IEC958 Playback Con Mask", index=0, device=0
Control: name="IEC958 Playback Pro Mask", index=0, device=0
Control: name="IEC958 Playback Default", index=0, device=0
Control: name="IEC958 Playback Switch", index=0, device=0
Control: name="ELD", index=0, device=3
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00]
Pincap 0x09000094: OUT Detect HBR HDMI DP
Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=01, enabled=1
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1
0x02
Node 0x06 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
Control: name="HDMI/DP,pcm=7 Jack", index=0, device=0
Control: name="IEC958 Playback Con Mask", index=1, device=0
Control: name="IEC958 Playback Pro Mask", index=1, device=0
Control: name="IEC958 Playback Default", index=1, device=0
Control: name="IEC958 Playback Switch", index=1, device=0
Control: name="ELD", index=0, device=7
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00]
Pincap 0x09000094: OUT Detect HBR HDMI DP
Pin Default 0x18560020: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x2, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=02, enabled=1
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1
0x03
Node 0x07 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
Control: name="HDMI/DP,pcm=8 Jack", index=0, device=0
Control: name="IEC958 Playback Con Mask", index=2, device=0
Control: name="IEC958 Playback Pro Mask", index=2, device=0
Control: name="IEC958 Playback Default", index=2, device=0
Control: name="IEC958 Playback Switch", index=2, device=0
Control: name="ELD", index=0, device=8
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00]
Pincap 0x09000094: OUT Detect HBR HDMI DP
Pin Default 0x18560030: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x3, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=03, enabled=1
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1
0x04
Node 0x08 [Vendor Defined Widget] wcaps 0xf00000: Mono --endcollapse--
!!ALSA Device nodes
!!-----------------
crw-rw----+ 1 root audio 116, 3 Aug 14 10:30 /dev/snd/controlC0 crw-rw----+ 1 root audio 116, 2 Aug 14 10:30 /dev/snd/controlC29 crw-rw----+ 1 root audio 116, 9 Aug 14 10:30 /dev/snd/hwC0D0 crw-rw----+ 1 root audio 116, 10 Aug 14 10:30 /dev/snd/hwC0D3 crw-rw----+ 1 root audio 116, 5 Aug 14 10:30 /dev/snd/pcmC0D0c crw-rw----+ 1 root audio 116, 4 Aug 14 11:01 /dev/snd/pcmC0D0p crw-rw----+ 1 root audio 116, 6 Aug 14 10:30 /dev/snd/pcmC0D3p crw-rw----+ 1 root audio 116, 7 Aug 14 10:30 /dev/snd/pcmC0D7p crw-rw----+ 1 root audio 116, 8 Aug 14 10:30 /dev/snd/pcmC0D8p
crw-rw----+ 1 root audio 116, 33 Aug 14 10:30 /dev/snd/timer
/dev/snd/by-path:
total 0
drwxr-xr-x 2 root root 80 Aug 14 10:30 .
drwxr-xr-x 3 root root 260 Aug 14 10:30 ..
lrwxrwxrwx 1 root root 12 Aug 14 10:30 pci-0000:00:1b.0 -> ../controlC0 lrwxrwxrwx 1 root root 13 Aug 14 10:30 platform-thinkpad_acpi -> ../controlC29
!!Aplay/Arecord output
!!--------------------
APLAY
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC269VC Analog [ALC269VC Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 8: HDMI 2 [HDMI 2]
Subdevices: 1/1
Subdevice #0: subdevice #0
ARECORD
**** List of CAPTURE Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC269VC Analog [ALC269VC Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
!!Amixer output
!!-------------
!!-------Mixer controls for card 0 [PCH]
Card hw:0 'PCH'/'HDA Intel PCH at 0xf2530000 irq 45'
Mixer name : 'Intel PantherPoint HDMI'
Components : 'HDA:10ec0269,17aa21fa,00100203
HDA:80862806,80860101,00100000' Controls : 50
Simple ctrls : 17
Simple mixer control 'Master',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono
Limits: Playback 0 - 87
Mono: Playback 19 [22%] [-51.00dB] [on]
Simple mixer control 'Headphone',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 87
Mono:
Front Left: Playback 87 [100%] [0.00dB] [on] Front Right: Playback 87 [100%] [0.00dB] [on]
Simple mixer control 'Headphone',1
Capabilities: pswitch
Playback channels: Front Left - Front Right
Mono:
Front Left: Playback [on]
Front Right: Playback [on]
Simple mixer control 'Speaker',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 87
Mono:
Front Left: Playback 87 [100%] [0.00dB] [on] Front Right: Playback 87 [100%] [0.00dB] [on]
Simple mixer control 'PCM',0
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 255 [100%] [0.00dB]
Front Right: Playback 255 [100%] [0.00dB]
Simple mixer control 'Mic',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 0 [0%] [-34.50dB] [on]
Front Right: Playback 0 [0%] [-34.50dB] [on]
Simple mixer control 'Mic Boost',0
Capabilities: volume
Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 0 [0%] [0.00dB]
Front Right: 0 [0%] [0.00dB]
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'IEC958',1
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'IEC958',2
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'Beep',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 0 [0%] [-34.50dB] [off] Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch
Capture channels: Front Left - Front Right
Limits: Capture 0 - 63
Front Left: Capture 63 [100%] [30.00dB] [off] Front Right: Capture 63 [100%] [30.00dB] [off]
Simple mixer control 'Auto-Mute Mode',0
Capabilities: enum
Items: 'Disabled' 'Enabled'
Item0: 'Enabled'
Simple mixer control 'Digital',0
Capabilities: cvolume
Capture channels: Front Left - Front Right
Limits: Capture 0 - 120
Front Left: Capture 60 [50%] [0.00dB]
Front Right: Capture 60 [50%] [0.00dB]
Simple mixer control 'Dock Mic',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 0 [0%] [-34.50dB] [off] Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'Dock Mic Boost',0
Capabilities: volume
Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 0 [0%] [0.00dB]
Front Right: 0 [0%] [0.00dB]
Simple mixer control 'Internal Mic Boost',0
Capabilities: volume
Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 0 [0%] [0.00dB]
Front Right: 0 [0%] [0.00dB]
!!-------Mixer controls for card 29 [ThinkPadEC]
Card hw:29 'ThinkPadEC'/'ThinkPad Console Audio Control at EC reg 0x30,
fw unknown' Mixer name : 'ThinkPad EC (unknown)'
Components : ''
Controls : 1
Simple ctrls : 1
Simple mixer control 'Console',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
!!Alsactl output
!!--------------
--startcollapse--
state.PCH {
control.1 {
iface MIXER
name 'Speaker Playback Volume'
value.0 87
value.1 87
comment {
access 'read write'
type INTEGER
count 2
range '0 - 87'
dbmin -6525
dbmax 0
dbvalue.0 0
dbvalue.1 0
}
}
control.2 {
iface MIXER
name 'Speaker Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.3 {
iface MIXER
name 'Headphone Playback Volume'
value.0 87
value.1 87
comment {
access 'read write'
type INTEGER
count 2
range '0 - 87'
dbmin -6525
dbmax 0
dbvalue.0 0
dbvalue.1 0
}
}
control.4 {
iface MIXER
name 'Headphone Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.5 {
iface MIXER
name 'Headphone Playback Switch'
index 1
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.6 {
iface MIXER
name 'Mic Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -3450
dbmax 1200
dbvalue.0 -3450
dbvalue.1 -3450
}
}
control.7 {
iface MIXER
name 'Mic Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.8 {
iface MIXER
name 'Dock Mic Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -3450
dbmax 1200
dbvalue.0 -3450
dbvalue.1 -3450
}
}
control.9 {
iface MIXER
name 'Dock Mic Playback Switch'
value.0 false
value.1 false
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.10 {
iface MIXER
name 'Auto-Mute Mode'
value Enabled
comment {
access 'read write'
type ENUMERATED
count 1
item.0 Disabled
item.1 Enabled
}
}
control.11 {
iface MIXER
name 'Capture Volume'
value.0 63
value.1 63
comment {
access 'read write'
type INTEGER
count 2
range '0 - 63'
dbmin -1725
dbmax 3000
dbvalue.0 3000
dbvalue.1 3000
}
}
control.12 {
iface MIXER
name 'Capture Switch'
value.0 false
value.1 false
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.13 {
iface MIXER
name 'Mic Boost Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 3'
dbmin 0
dbmax 3000
dbvalue.0 0
dbvalue.1 0
}
}
control.14 {
iface MIXER
name 'Dock Mic Boost Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 3'
dbmin 0
dbmax 3000
dbvalue.0 0
dbvalue.1 0
}
}
control.15 {
iface MIXER
name 'Internal Mic Boost Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 3'
dbmin 0
dbmax 3000
dbvalue.0 0
dbvalue.1 0
}
}
control.16 {
iface MIXER
name 'Master Playback Volume'
value 19
comment {
access 'read write'
type INTEGER
count 1
range '0 - 87'
dbmin -6525
dbmax 0
dbvalue.0 -5100
}
}
control.17 {
iface MIXER
name 'Master Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.18 {
iface CARD
name 'Mic Jack'
value false
comment {
access read
type BOOLEAN
count 1
}
}
control.19 {
iface CARD
name 'Dock Mic Jack'
value false
comment {
access read
type BOOLEAN
count 1
}
}
control.20 {
iface CARD
name 'Internal Mic Phantom Jack'
value true
comment {
access read
type BOOLEAN
count 1
}
}
control.21 {
iface CARD
name 'Speaker Phantom Jack'
value true
comment {
access read
type BOOLEAN
count 1
}
}
control.22 {
iface CARD
name 'Headphone Jack'
value true
comment {
access read
type BOOLEAN
count 1
}
}
control.23 {
iface CARD
name 'Dock Headphone Jack'
value false
comment {
access read
type BOOLEAN
count 1
}
}
control.24 {
iface MIXER
name 'Beep Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -3450
dbmax 1200
dbvalue.0 -3450
dbvalue.1 -3450
}
}
control.25 {
iface MIXER
name 'Beep Playback Switch'
value.0 false
value.1 false
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.26 {
iface PCM
name 'Playback Channel Map'
value.0 3
value.1 4
value.2 0
value.3 0
comment {
access read
type INTEGER
count 4
range '0 - 36'
}
}
control.27 {
iface PCM
name 'Capture Channel Map'
value.0 0
value.1 0
comment {
access read
type INTEGER
count 2
range '0 - 36'
}
}
control.28 {
iface CARD
name 'HDMI/DP,pcm=3 Jack'
value false
comment {
access read
type BOOLEAN
count 1
}
}
control.29 {
iface MIXER
name 'IEC958 Playback Con Mask'
value
'0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment { access read
type IEC958
count 1
}
}
control.30 {
iface MIXER
name 'IEC958 Playback Pro Mask'
value
'0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment { access read
type IEC958
count 1
}
}
control.31 {
iface MIXER
name 'IEC958 Playback Default'
value
'0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment { access 'read write'
type IEC958
count 1
}
}
control.32 {
iface MIXER
name 'IEC958 Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.33 {
iface PCM
device 3
name ELD
value ''
comment {
access 'read volatile'
type BYTES
count 0
}
}
control.34 {
iface CARD
name 'HDMI/DP,pcm=7 Jack'
value false
comment {
access read
type BOOLEAN
count 1
}
}
control.35 {
iface MIXER
name 'IEC958 Playback Con Mask'
index 1
value
'0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment { access read
type IEC958
count 1
}
}
control.36 {
iface MIXER
name 'IEC958 Playback Pro Mask'
index 1
value
'0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment { access read
type IEC958
count 1
}
}
control.37 {
iface MIXER
name 'IEC958 Playback Default'
index 1
value
'0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment { access 'read write'
type IEC958
count 1
}
}
control.38 {
iface MIXER
name 'IEC958 Playback Switch'
index 1
value true
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.39 {
iface PCM
device 7
name ELD
value ''
comment {
access 'read volatile'
type BYTES
count 0
}
}
control.40 {
iface CARD
name 'HDMI/DP,pcm=8 Jack'
value false
comment {
access read
type BOOLEAN
count 1
}
}
control.41 {
iface MIXER
name 'IEC958 Playback Con Mask'
index 2
value
'0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment { access read
type IEC958
count 1
}
}
control.42 {
iface MIXER
name 'IEC958 Playback Pro Mask'
index 2
value
'0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment { access read
type IEC958
count 1
}
}
control.43 {
iface MIXER
name 'IEC958 Playback Default'
index 2
value
'0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment { access 'read write'
type IEC958
count 1
}
}
control.44 {
iface MIXER
name 'IEC958 Playback Switch'
index 2
value true
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.45 {
iface PCM
device 8
name ELD
value ''
comment {
access 'read volatile'
type BYTES
count 0
}
}
control.46 {
iface PCM
device 3
name 'Playback Channel Map'
value.0 0
value.1 0
value.2 0
value.3 0
value.4 0
value.5 0
value.6 0
value.7 0
comment {
access 'read write'
type INTEGER
count 8
range '0 - 36'
}
}
control.47 {
iface PCM
device 7
name 'Playback Channel Map'
value.0 0
value.1 0
value.2 0
value.3 0
value.4 0
value.5 0
value.6 0
value.7 0
comment {
access 'read write'
type INTEGER
count 8
range '0 - 36'
}
}
control.48 {
iface PCM
device 8
name 'Playback Channel Map'
value.0 0
value.1 0
value.2 0
value.3 0
value.4 0
value.5 0
value.6 0
value.7 0
comment {
access 'read write'
type INTEGER
count 8
range '0 - 36'
}
}
control.49 {
iface MIXER
name 'PCM Playback Volume'
value.0 255
value.1 255
comment {
access 'read write user'
type INTEGER
count 2
range '0 - 255'
tlv '0000000100000008ffffec1400000014'
dbmin -5100
dbmax 0
dbvalue.0 0
dbvalue.1 0
}
}
control.50 {
iface MIXER
name 'Digital Capture Volume'
value.0 60
value.1 60
comment {
access 'read write user'
type INTEGER
count 2
range '0 - 120'
tlv '0000000100000008fffff44800000032'
dbmin -3000
dbmax 3000
dbvalue.0 0
dbvalue.1 0
}
}
}
state.ThinkPadEC {
control.1 {
iface MIXER
name 'Console Playback Switch'
value true
comment {
access read
type BOOLEAN
count 1
}
}
}--endcollapse--
!!All Loaded Modules
!!------------------
Moduleacpi_call
arc4
iwldvm
uvcvideox86_pkg_temp_thermalintel_powerclampintel_rapl
ecbvideobuf2_vmallocvideobuf2_memops
coretempvideobuf2_corekvm_intel
mac80211
btusb
bluetooth
crc16snd_hda_codec_hdmi
i915v4l2_common
kvm
videodevsnd_hda_codec_realteksnd_hda_codec_generic
iwlwifi
cfg80211snd_hda_inteli2c_algo_bitdrm_kms_helper
drm
evdevsnd_hda_controllerthinkpad_acpi
wmi
pcspkrsnd_hda_codec
psmouse
nvramserio_raw
rfkillsnd_hwdepi2c_i801snd_pcmsnd_timer
sndtpm_tis
soundcore
tpmi2c_core
battery
ac
video
button
processorsch_fq
fuse
autofs4dm_cryptdm_modsd_modcrc_t10difcrct10dif_genericcrct10dif_pclmulcrct10dif_commoncrc32_pclmulcrc32c_intelghash_clmulni_intel
ahci
libahciehci_pcixhci_hcdehci_hcd
libatasdhci_pci
sdhciscsi_mod
usbcore
e1000emmc_coreusb_common
ptppps_core
thermalthermal_sys
!!Sysfs Files
!!-----------
/sys/class/sound/hwC0D0/init_pin_configs:0x12 0x90a601400x14 0x901701100x15 0x032110200x17 0x411111f00x18 0x03a118300x19 0x411111f00x1a 0x411111f00x1b 0x411111f00x1d 0x401382050x1e 0x411111f0
/sys/class/sound/hwC0D0/driver_pin_configs:0x19 0x23a110400x1b 0x2121103f
/sys/class/sound/hwC0D0/user_pin_configs:
/sys/class/sound/hwC0D0/init_verbs:
/sys/class/sound/hwC0D0/hints:
/sys/class/sound/hwC0D3/init_pin_configs:0x05 0x185600100x06 0x185600200x07 0x18560030
/sys/class/sound/hwC0D3/driver_pin_configs:
/sys/class/sound/hwC0D3/user_pin_configs:
/sys/class/sound/hwC0D3/init_verbs:
/sys/class/sound/hwC0D3/hints:
!!ALSA/HDA dmesg
!!--------------
[ 15.620516] [drm] Initialized drm 1.1.0 20060810 [ 15.750496] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X [ 15.810710] cfg80211: Calling CRDA to update world regulatory domain -- [ 15.858672] iwlwifi 0000:03:00.0: irq 46 for MSI/MSI-X [ 15.937398] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 15.937403] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 15.937406] sound hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0) [ 15.937408] sound hdaudioC0D0: mono: mono_out=0x0 [ 15.937410] sound hdaudioC0D0: inputs: [ 15.937413] sound hdaudioC0D0: Mic=0x18 [ 15.937415] sound hdaudioC0D0: Dock Mic=0x19 [ 15.937417] sound hdaudioC0D0: Internal Mic=0x12 [ 15.941372] usb 1-1.4: new full-speed USB device number 5 using ehci-pci -- [ 15.972070] Console: switching to colour dummy device 80x25 [ 15.980930] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input8 [ 15.981282] input: HDA Intel PCH Mic
as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 15.981677]
input: HDA Intel PCH Dock Mic
as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 15.981779]
input: HDA Intel PCH Headphone
as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 15.981879]
input: HDA Intel PCH Dock Headphone
as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 15.982280]
input: HDA Intel PCH HDMI/DP,pcm=3
as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 15.982802]
input: HDA Intel PCH HDMI/DP,pcm=7
as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 15.983440]
input: HDA Intel PCH HDMI/DP,pcm=8
as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 15.993203]
i915 0000:00:02.0: irq 47 for MSI/MSI-X
Quoted 5 lines · Julian Wollrath
when having my soundcard not muted, I get to hear grey noise over the speakers or over the headphone
Simple mixer control 'Master',0
Mono: Playback 19 [22%] [-51.00dB] [on]
This is rather low. A lower signal level implies a worse signal-to- noise ratio.
Quoted 3 lines
Simple mixer control 'Mic',0
Front Left: Playback 0 [0%] [-34.50dB] [on]
Front Right: Playback 0 [0%] [-34.50dB] [on]
This plays any noise from the mic input.
Regards,
Clemens
Am Thu, 14 Aug 2014 12:20:11 +0200
schrieb Clemens Ladisch <[email protected]>:
Quoted 9 lines
Quoted 5 lines · Julian Wollrath
when having my soundcard not muted, I get to hear grey noise over the speakers or over the headphone
Simple mixer control 'Master',0
Mono: Playback 19 [22%] [-51.00dB] [on]This is rather low. A lower signal level implies a worse signal-to- noise ratio.
It is also hearable, with the volume turned up higher and when nothing is playing.
Quoted 5 lines
Quoted 3 lines
Simple mixer control 'Mic',0
Front Left: Playback 0 [0%] [-34.50dB] [on]
Front Right: Playback 0 [0%] [-34.50dB] [on]This plays any noise from the mic input.
Turning it off makes no difference since capture is turned off anyway:
Quoted 6 lines
Quoted 6 lines
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch
Capture channels: Front Left - Front Right
Limits: Capture 0 - 63
Front Left: Capture 63 [100%] [30.00dB] [off]
Front Right: Capture 63 [100%] [30.00dB] [off]
Cheers,
Julian
At Thu, 14 Aug 2014 12:46:16 +0200,
Quoted 16 lines · Julian Wollrath
Am Thu, 14 Aug 2014 12:20:11 +0200
schrieb Clemens Ladisch <[email protected]>:Quoted 9 lines
Quoted 5 lines · Julian Wollrath
when having my soundcard not muted, I get to hear grey noise over the speakers or over the headphone
Simple mixer control 'Master',0
Mono: Playback 19 [22%] [-51.00dB] [on]This is rather low. A lower signal level implies a worse signal-to- noise ratio.
It is also hearable, with the volume turned up higher and when nothing is playing.
Quoted 6 lines
Quoted 5 lines
Quoted 3 lines
Simple mixer control 'Mic',0
Front Left: Playback 0 [0%] [-34.50dB] [on]
Front Right: Playback 0 [0%] [-34.50dB] [on]This plays any noise from the mic input.
Turning it off makes no difference since capture is turned off anyway:
This is a loopback mixer element, it has nothing to do with capture stream.
The likely culprit of the static noises is the signal from the analog loopback. In some cases, you can disable the whole loopback via "Loopback Mixing" mixer element on the fly. In some cases, you'd need to disable each mixer input (e.g. "Mic Playback Switch"). In some cases (e.g. on some Sony and Dell laptops), you'd need to disable the complete analog loopback at the initialization.
The last one can be done via the early patching or sysfs reconfiguration, pass "mixer_nid = 0" hint. See HD-Audio.txt for a brief instruction.
Takashi
Quoted 18 lines
Quoted 7 lines
Quoted 5 lines
Quoted 3 lines
Simple mixer control 'Mic',0
Front Left: Playback 0 [0%] [-34.50dB] [on]
Front Right: Playback 0 [0%] [-34.50dB] [on]This plays any noise from the mic input.
Turning it off makes no difference since capture is turned off anyway:
This is a loopback mixer element, it has nothing to do with capture stream.
The likely culprit of the static noises is the signal from the analog loopback. In some cases, you can disable the whole loopback via "Loopback Mixing" mixer element on the fly. In some cases, you'd need to disable each mixer input (e.g. "Mic Playback Switch"). In some cases (e.g. on some Sony and Dell laptops), you'd need to disable the complete analog loopback at the initialization.
Quoted 3 lines
The last one can be done via the early patching or sysfs reconfiguration, pass "
mixer_nid= 0" hint. See HD-Audio.txt for a brief instruction.
Sadly, that did not help.
Cheers,
Julian
At Thu, 14 Aug 2014 16:07:37 +0200,
Quoted 19 lines · Julian Wollrath
Quoted 19 lines
Quoted 8 lines
Quoted 6 lines
Quoted 4 lines
Simple mixer control 'Mic',0
Front Left: Playback 0 [0%] [-34.50dB] [on]
Front Right: Playback 0 [0%] [-34.50dB] [on]This plays any noise from the mic input.
Turning it off makes no difference since capture is turned off anyway:
This is a loopback mixer element, it has nothing to do with capture stream.
The likely culprit of the static noises is the signal from the analog loopback. In some cases, you can disable the whole loopback via "Loopback Mixing" mixer element on the fly. In some cases, you'd need to disable each mixer input (e.g. "Mic Playback Switch"). In some cases (e.g. on some Sony and Dell laptops), you'd need to disable the complete analog loopback at the initialization.
Quoted 4 lines
Quoted 3 lines
The last one can be done via the early patching or sysfs reconfiguration, pass "
mixer_nid= 0" hint. See HD-Audio.txt for a brief instruction.Sadly, that did not help.
Give alsa-info.sh output after your change to verify whether you did correctly.
Takashi
Am Thu, 14 Aug 2014 16:09:51 +0200
schrieb Takashi Iwai <[email protected]>:
Quoted 22 lines
At Thu, 14 Aug 2014 16:07:37 +0200,
Quoted 20 lines · Julian Wollrath
Quoted 20 lines
Quoted 8 lines
Quoted 6 lines
Quoted 4 lines
Simple mixer control 'Mic',0
Front Left: Playback 0 [0%] [-34.50dB] [on]
Front Right: Playback 0 [0%] [-34.50dB] [on]This plays any noise from the mic input.
Turning it off makes no difference since capture is turned off anyway:
This is a loopback mixer element, it has nothing to do with capture stream.
The likely culprit of the static noises is the signal from the analog loopback. In some cases, you can disable the whole loopback via "Loopback Mixing" mixer element on the fly. In some cases, you'd need to disable each mixer input (e.g. "Mic Playback Switch"). In some cases (e.g. on some Sony and Dell laptops), you'd need to disable the complete analog loopback at the initialization.
Quoted 7 lines
Quoted 4 lines
Quoted 3 lines
The last one can be done via the early patching or sysfs reconfiguration, pass "
mixer_nid= 0" hint. See HD-Audio.txt for a brief instruction.Sadly, that did not help.
Give
alsa-info.shoutput after your change to verify whether you did correctly.
Here it is, cheers:
!!################################
!!ALSA Information Script v 0.4.63
!!################################
!!Script ran on: Thu Aug 14 14:37:19 UTC 2014
!!Linux Distribution
!!------------------
Debian GNU/Linux jessie/sid \n \l PRETTY_NAME="Debian GNU/Linux jessie/sid" NAME="Debian GNU/Linux" ID=debian HOME_URL="http://www.debian.org/" SUPPORT_URL="http://www.debian.org/support/" BUG_REPORT_URL="https://bugs.debian.org/"
!!DMI Information
!!---------------
Manufacturer: LENOVO Product Name: 23250BM Product Version: ThinkPad X230 Firmware Version: G2ETA1WW (2.61 )
!!Kernel Information
!!------------------
Kernel release: 3.16.1 Operating System: GNU/Linux Architecture: x86_64 Processor: unknown SMP Enabled: Yes
!!ALSA Version
!!------------
Driver version: k3.16.1 Library version: 1.0.28 Utilities version: 1.0.28
!!Loaded ALSA modules
!!-------------------
snd_hda_intelthinkpad_acpi
!!Sound Servers on this system
!!----------------------------
No sound servers found.
!!Soundcards recognised by ALSA
!!-----------------------------
0 [PCH ]: HDA-Intel - HDA Intel PCH
HDA Intel PCH at 0xf2530000 irq 42
29 [ThinkPadEC ]: ThinkPad EC - ThinkPad Console Audio Control
ThinkPad Console Audio Control at EC reg 0x30, fw unknown!!PCI Soundcards installed in the system
!!--------------------------------------
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
!!Advanced information - PCI Vendor/Device/Subsystem ID's !!-------------------------------------------------------
00:1b.0 0403: 8086:1e20 (rev 04)
Subsystem: 17aa:21fa
!!Modprobe options (Sound related)
!!--------------------------------
snd_pcsp: index=-2snd_usb_audio: index=-2snd_atiixp_modem: index=-2snd_intel8x0m: index=-2snd_via82xx_modem: index=-2
!!Loaded sound module options
!!---------------------------
!!Module: snd_hda_intel
align_buffer_size : -1 bdl_pos_adj : 1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 beep_mode : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y enable_msi : -1 id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 jackpoll_ms : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 model : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) patch : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) position_fix : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 power_save : 1 power_save_controller : Y probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 probe_only : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 single_cmd : N snoop : Y
!!Module: thinkpad_acpi
brightness_enable : 2
brightness_mode : 4
enable : Y
experimental : 0
fan_control : N
force_load : N
id : ThinkPadEC
index : -536870912
volume_capabilities : 0
volume_control : N
volume_mode : 3
!!HDA-Intel Codec information
!!---------------------------
--startcollapse--
Codec: Realtek ALC269VC
Address: 0
AFG Function Id: 0x1 (unsol 1)
Vendor Id: 0x10ec0269
Subsystem Id: 0x17aa21fa
Revision Id: 0x100203
No Modem Function Group found
Default PCM:
rates [0x5f0]: 32000 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCMDefault Amp-In caps: N/A
Default Amp-Out caps: N/A
State of AFG node 0x01:
Power states: D0 D1 D2 D3 CLKSTOP EPSS
Power: setting=D0, actual=D0
GPIO: io=2, o=0, i=0, unsolicited=1, wake=0
IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Control: name="Speaker Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Device: name="ALC269VC Analog", type="Audio", device=0
Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0
Amp-Out vals: [0x00 0x00]
Converter: stream=0, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Control: name="Headphone Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0
Amp-Out vals: [0x00 0x00]
Converter: stream=0, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x04 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x05 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x06 [Audio Output] wcaps 0x611: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0x5f0]: 32000 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x08 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1 Amp-In vals: [0x97 0x97]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1
0x23
Node 0x09 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Control: name="Capture Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Capture Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Device: name="ALC269VC Analog", type="Audio", device=0
Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1
Amp-In vals: [0x80 0x80]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1
0x22
Node 0x0a [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Control: name="Beep Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=4, ofs=0
Control: name="Beep Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=4, ofs=0
Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Connection: 5
0x18 0x19 0x1a 0x1b 0x1dNode 0x0c [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x80 0x80]
Connection: 2
0x02 0x0b
Node 0x0d [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x80 0x80]
Connection: 2
0x03 0x0b
Node 0x0e [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x0f [Audio Mixer] wcaps 0x20010a: Mono Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00] [0x80]
Connection: 2
0x02 0x0b
Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x12 [Pin Complex] wcaps 0x40040b: Stereo Amp-In
Control: name="Internal Mic Boost Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Internal Mic Phantom Jack", index=0, device=0 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00]
Pincap 0x00000020: IN
Pin Default 0x90a60140: [Fixed] Mic at Int N/A
Conn = Digital, Color = Unknown
DefAssociation = 0x4, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x14 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Control: name="Speaker Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Speaker Phantom Jack", index=0, device=0
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x00010014: OUT EAPD Detect
EAPD 0x2: EAPD
Pin Default 0x90170110: [Fixed] Speaker at Int N/A
Conn = Analog, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 2
0x0c* 0x0d
Node 0x15 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Control: name="Headphone Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Headphone Jack", index=0, device=0
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x0001001c: OUT HP EAPD Detect
EAPD 0x2: EAPD
Pin Default 0x03211020: [Jack] HP Out at Ext Left
Conn = 1/8, Color = Black
DefAssociation = 0x2, Sequence = 0x0
Pin-ctls: 0xc0: OUT HP
Unsolicited: tag=01, enabled=1
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 2
0x0c 0x0d*Node 0x16 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x17 [Pin Complex] wcaps 0x40050c: Mono Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80]
Pincap 0x00000010: OUT
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1
0x0f
Node 0x18 [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out
Control: name="Mic Boost Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Mic Jack", index=0, device=0
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x00003734: IN OUT Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x03a11830: [Jack] Mic at Ext Left
Conn = 1/8, Color = Black
DefAssociation = 0x3, Sequence = 0x0
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=04, enabled=1
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 2
0x0c* 0x0d
Node 0x19 [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out
Control: name="Dock Mic Boost Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Dock Mic Jack", index=0, device=0
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x00003734: IN OUT Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=03, enabled=1
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 2
0x0c* 0x0dNode 0x1a [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80]
Pincap 0x0000373c: IN OUT HP Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00: VREF_HIZ
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 2
0x0c* 0x0d
Node 0x1b [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out
Control: name="Headphone Playback Switch", index=1, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Dock Headphone Jack", index=0, device=0
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x00003734: IN OUT Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT VREF_HIZ
Unsolicited: tag=02, enabled=1
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 2
0x0c 0x0d*Node 0x1c [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x1d [Pin Complex] wcaps 0x400400: Mono
Pincap 0x00000020: IN
Pin Default 0x40138205: [N/A] Speaker at Ext N/A
Conn = ATAPI, Color = Purple DefAssociation = 0x0, Sequence = 0x5
Pin-ctls: 0x00:
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x1e [Pin Complex] wcaps 0x400781: Stereo Digital
Pincap 0x00000014: OUT Detect
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1
0x06
Node 0x1f [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
Processing caps: benign=0, ncoeff=37
Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x22 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x00 0x00]
Connection: 7
0x18 0x19 0x1a 0x1b 0x1d 0x0b 0x12
Node 0x23 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Connection: 6
0x18 0x19 0x1a 0x1b 0x1d 0x0b
Codec: Intel PantherPoint HDMI
Address: 3
AFG Function Id: 0x1 (unsol 0)
Vendor Id: 0x80862806
Subsystem Id: 0x80860101
Revision Id: 0x100000
No Modem Function Group found
Default PCM:
rates [0x0]:
bits [0x0]:
formats [0x0]:Default Amp-In caps: N/A
Default Amp-Out caps: N/A
State of AFG node 0x01:
Power states: D0 D3 CLKSTOP EPSS
Power: setting=D0, actual=D0, Clock-stop-OK
GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
Node 0x02 [Audio Output] wcaps 0x6611: 8-Channels Digital
Converter: stream=0, channel=0
Digital: Enabled
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
bits [0x1e]: 16 20 24 32
formats [0x5]: PCM AC3 Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Node 0x03 [Audio Output] wcaps 0x6611: 8-Channels Digital
Converter: stream=0, channel=0
Digital: Enabled
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
bits [0x1e]: 16 20 24 32
formats [0x5]: PCM AC3 Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Node 0x04 [Audio Output] wcaps 0x6611: 8-Channels Digital
Converter: stream=0, channel=0
Digital: Enabled
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
bits [0x1e]: 16 20 24 32
formats [0x5]: PCM AC3 Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Node 0x05 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
Control: name="HDMI/DP,pcm=3 Jack", index=0, device=0
Control: name="IEC958 Playback Con Mask", index=0, device=0
Control: name="IEC958 Playback Pro Mask", index=0, device=0
Control: name="IEC958 Playback Default", index=0, device=0
Control: name="IEC958 Playback Switch", index=0, device=0
Control: name="ELD", index=0, device=3
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00]
Pincap 0x09000094: OUT Detect HBR HDMI DP
Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=01, enabled=1
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1
0x02
Node 0x06 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
Control: name="HDMI/DP,pcm=7 Jack", index=0, device=0
Control: name="IEC958 Playback Con Mask", index=1, device=0
Control: name="IEC958 Playback Pro Mask", index=1, device=0
Control: name="IEC958 Playback Default", index=1, device=0
Control: name="IEC958 Playback Switch", index=1, device=0
Control: name="ELD", index=0, device=7
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00]
Pincap 0x09000094: OUT Detect HBR HDMI DP
Pin Default 0x18560020: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x2, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=02, enabled=1
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1
0x03
Node 0x07 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
Control: name="HDMI/DP,pcm=8 Jack", index=0, device=0
Control: name="IEC958 Playback Con Mask", index=2, device=0
Control: name="IEC958 Playback Pro Mask", index=2, device=0
Control: name="IEC958 Playback Default", index=2, device=0
Control: name="IEC958 Playback Switch", index=2, device=0
Control: name="ELD", index=0, device=8
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00]
Pincap 0x09000094: OUT Detect HBR HDMI DP
Pin Default 0x18560030: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x3, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=03, enabled=1
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1
0x04
Node 0x08 [Vendor Defined Widget] wcaps 0xf00000: Mono --endcollapse--
!!ALSA Device nodes
!!-----------------
crw-rw----+ 1 root audio 116, 3 Aug 14 16:05 /dev/snd/controlC0 crw-rw----+ 1 root audio 116, 2 Aug 14 10:30 /dev/snd/controlC29 crw-rw----+ 1 root audio 116, 9 Aug 14 16:05 /dev/snd/hwC0D0 crw-rw----+ 1 root audio 116, 10 Aug 14 16:05 /dev/snd/hwC0D3 crw-rw----+ 1 root audio 116, 5 Aug 14 16:32 /dev/snd/pcmC0D0c crw-rw----+ 1 root audio 116, 4 Aug 14 16:32 /dev/snd/pcmC0D0p crw-rw----+ 1 root audio 116, 6 Aug 14 16:36 /dev/snd/pcmC0D3p crw-rw----+ 1 root audio 116, 7 Aug 14 16:36 /dev/snd/pcmC0D7p crw-rw----+ 1 root audio 116, 8 Aug 14 16:36 /dev/snd/pcmC0D8p
crw-rw----+ 1 root audio 116, 33 Aug 14 10:30 /dev/snd/timer
/dev/snd/by-path:
total 0
drwxr-xr-x 2 root root 80 Aug 14 16:05 .
drwxr-xr-x 3 root root 260 Aug 14 16:36 ..
lrwxrwxrwx 1 root root 12 Aug 14 16:05 pci-0000:00:1b.0 -> ../controlC0 lrwxrwxrwx 1 root root 13 Aug 14 10:30 platform-thinkpad_acpi -> ../controlC29
!!Aplay/Arecord output
!!--------------------
APLAY
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC269VC Analog [ALC269VC Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 8: HDMI 2 [HDMI 2]
Subdevices: 1/1
Subdevice #0: subdevice #0
ARECORD
**** List of CAPTURE Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC269VC Analog [ALC269VC Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
!!Amixer output
!!-------------
!!-------Mixer controls for card 0 [PCH]
Card hw:0 'PCH'/'HDA Intel PCH at 0xf2530000 irq 42'
Mixer name : 'Intel PantherPoint HDMI'
Components : 'HDA:10ec0269,17aa21fa,00100203 HDA:80862806,80860101,00100000'
Controls : 46
Simple ctrls : 15
Simple mixer control 'Master',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono
Limits: Playback 0 - 87
Mono: Playback 0 [0%] [-65.25dB] [on]
Simple mixer control 'Headphone',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 87
Mono:
Front Left: Playback 87 [100%] [0.00dB] [on] Front Right: Playback 87 [100%] [0.00dB] [on]
Simple mixer control 'Headphone',1
Capabilities: pswitch
Playback channels: Front Left - Front Right
Mono:
Front Left: Playback [on]
Front Right: Playback [on]
Simple mixer control 'Speaker',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 87
Mono:
Front Left: Playback 87 [100%] [0.00dB] [on] Front Right: Playback 87 [100%] [0.00dB] [on]
Simple mixer control 'PCM',0
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 255 [100%] [0.00dB]
Front Right: Playback 255 [100%] [0.00dB]
Simple mixer control 'Mic Boost',0
Capabilities: volume
Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 0 [0%] [0.00dB]
Front Right: 0 [0%] [0.00dB]
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'IEC958',1
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'IEC958',2
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'Beep',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 0 [0%] [-34.50dB] [off] Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch
Capture channels: Front Left - Front Right
Limits: Capture 0 - 63
Front Left: Capture 0 [0%] [-17.25dB] [off]
Front Right: Capture 0 [0%] [-17.25dB] [off]
Simple mixer control 'Auto-Mute Mode',0
Capabilities: enum
Items: 'Disabled' 'Enabled'
Item0: 'Enabled'
Simple mixer control 'Digital',0
Capabilities: cvolume
Capture channels: Front Left - Front Right
Limits: Capture 0 - 120
Front Left: Capture 60 [50%] [0.00dB]
Front Right: Capture 60 [50%] [0.00dB]
Simple mixer control 'Dock Mic Boost',0
Capabilities: volume
Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 0 [0%] [0.00dB]
Front Right: 0 [0%] [0.00dB]
Simple mixer control 'Internal Mic Boost',0
Capabilities: volume
Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 0 [0%] [0.00dB]
Front Right: 0 [0%] [0.00dB]
!!-------Mixer controls for card 29 [ThinkPadEC]
Card hw:29 'ThinkPadEC'/'ThinkPad Console Audio Control at EC reg 0x30, fw unknown'
Mixer name : 'ThinkPad EC (unknown)'
Components : ''
Controls : 1
Simple ctrls : 1
Simple mixer control 'Console',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
!!Alsactl output
!!--------------
--startcollapse--
state.PCH {
control.49 {
iface MIXER
name 'PCM Playback Volume'
value.0 255
value.1 255
comment {
access 'read write user'
type INTEGER
count 2
range '0 - 255'
tlv '0000000100000008ffffec1400000014'
dbmin -5100
dbmax 0
dbvalue.0 0
dbvalue.1 0
}
}
control.50 {
iface MIXER
name 'Digital Capture Volume'
value.0 60
value.1 60
comment {
access 'read write user'
type INTEGER
count 2
range '0 - 120'
tlv '0000000100000008fffff44800000032'
dbmin -3000
dbmax 3000
dbvalue.0 0
dbvalue.1 0
}
}
control.51 {
iface MIXER
name 'Speaker Playback Volume'
value.0 87
value.1 87
comment {
access 'read write'
type INTEGER
count 2
range '0 - 87'
dbmin -6525
dbmax 0
dbvalue.0 0
dbvalue.1 0
}
}
control.52 {
iface MIXER
name 'Speaker Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.53 {
iface MIXER
name 'Headphone Playback Volume'
value.0 87
value.1 87
comment {
access 'read write'
type INTEGER
count 2
range '0 - 87'
dbmin -6525
dbmax 0
dbvalue.0 0
dbvalue.1 0
}
}
control.54 {
iface MIXER
name 'Headphone Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.55 {
iface MIXER
name 'Headphone Playback Switch'
index 1
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.56 {
iface MIXER
name 'Auto-Mute Mode'
value Enabled
comment {
access 'read write'
type ENUMERATED
count 1
item.0 Disabled
item.1 Enabled
}
}
control.57 {
iface MIXER
name 'Capture Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 63'
dbmin -1725
dbmax 3000
dbvalue.0 -1725
dbvalue.1 -1725
}
}
control.58 {
iface MIXER
name 'Capture Switch'
value.0 false
value.1 false
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.59 {
iface MIXER
name 'Mic Boost Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 3'
dbmin 0
dbmax 3000
dbvalue.0 0
dbvalue.1 0
}
}
control.60 {
iface MIXER
name 'Dock Mic Boost Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 3'
dbmin 0
dbmax 3000
dbvalue.0 0
dbvalue.1 0
}
}
control.61 {
iface MIXER
name 'Internal Mic Boost Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 3'
dbmin 0
dbmax 3000
dbvalue.0 0
dbvalue.1 0
}
}
control.62 {
iface MIXER
name 'Master Playback Volume'
value 0
comment {
access 'read write'
type INTEGER
count 1
range '0 - 87'
dbmin -6525
dbmax 0
dbvalue.0 -6525
}
}
control.63 {
iface MIXER
name 'Master Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.64 {
iface CARD
name 'Mic Jack'
value false
comment {
access read
type BOOLEAN
count 1
}
}
control.65 {
iface CARD
name 'Dock Mic Jack'
value false
comment {
access read
type BOOLEAN
count 1
}
}
control.66 {
iface CARD
name 'Internal Mic Phantom Jack'
value true
comment {
access read
type BOOLEAN
count 1
}
}
control.67 {
iface CARD
name 'Speaker Phantom Jack'
value true
comment {
access read
type BOOLEAN
count 1
}
}
control.68 {
iface CARD
name 'Headphone Jack'
value false
comment {
access read
type BOOLEAN
count 1
}
}
control.69 {
iface CARD
name 'Dock Headphone Jack'
value false
comment {
access read
type BOOLEAN
count 1
}
}
control.70 {
iface MIXER
name 'Beep Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -3450
dbmax 1200
dbvalue.0 -3450
dbvalue.1 -3450
}
}
control.71 {
iface MIXER
name 'Beep Playback Switch'
value.0 false
value.1 false
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.72 {
iface PCM
name 'Playback Channel Map'
value.0 0
value.1 0
value.2 0
value.3 0
comment {
access read
type INTEGER
count 4
range '0 - 36'
}
}
control.73 {
iface PCM
name 'Capture Channel Map'
value.0 0
value.1 0
comment {
access read
type INTEGER
count 2
range '0 - 36'
}
}
control.74 {
iface CARD
name 'HDMI/DP,pcm=3 Jack'
value false
comment {
access read
type BOOLEAN
count 1
}
}
control.75 {
iface MIXER
name 'IEC958 Playback Con Mask'
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.76 {
iface MIXER
name 'IEC958 Playback Pro Mask'
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.77 {
iface MIXER
name 'IEC958 Playback Default'
value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access 'read write'
type IEC958
count 1
}
}
control.78 {
iface MIXER
name 'IEC958 Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.79 {
iface PCM
device 3
name ELD
value ''
comment {
access 'read volatile'
type BYTES
count 0
}
}
control.80 {
iface CARD
name 'HDMI/DP,pcm=7 Jack'
value false
comment {
access read
type BOOLEAN
count 1
}
}
control.81 {
iface MIXER
name 'IEC958 Playback Con Mask'
index 1
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.82 {
iface MIXER
name 'IEC958 Playback Pro Mask'
index 1
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.83 {
iface MIXER
name 'IEC958 Playback Default'
index 1
value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access 'read write'
type IEC958
count 1
}
}
control.84 {
iface MIXER
name 'IEC958 Playback Switch'
index 1
value true
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.85 {
iface PCM
device 7
name ELD
value ''
comment {
access 'read volatile'
type BYTES
count 0
}
}
control.86 {
iface CARD
name 'HDMI/DP,pcm=8 Jack'
value false
comment {
access read
type BOOLEAN
count 1
}
}
control.87 {
iface MIXER
name 'IEC958 Playback Con Mask'
index 2
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.88 {
iface MIXER
name 'IEC958 Playback Pro Mask'
index 2
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.89 {
iface MIXER
name 'IEC958 Playback Default'
index 2
value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access 'read write'
type IEC958
count 1
}
}
control.90 {
iface MIXER
name 'IEC958 Playback Switch'
index 2
value true
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.91 {
iface PCM
device 8
name ELD
value ''
comment {
access 'read volatile'
type BYTES
count 0
}
}
control.92 {
iface PCM
device 3
name 'Playback Channel Map'
value.0 0
value.1 0
value.2 0
value.3 0
value.4 0
value.5 0
value.6 0
value.7 0
comment {
access 'read write'
type INTEGER
count 8
range '0 - 36'
}
}
control.93 {
iface PCM
device 7
name 'Playback Channel Map'
value.0 0
value.1 0
value.2 0
value.3 0
value.4 0
value.5 0
value.6 0
value.7 0
comment {
access 'read write'
type INTEGER
count 8
range '0 - 36'
}
}
control.94 {
iface PCM
device 8
name 'Playback Channel Map'
value.0 0
value.1 0
value.2 0
value.3 0
value.4 0
value.5 0
value.6 0
value.7 0
comment {
access 'read write'
type INTEGER
count 8
range '0 - 36'
}
}
}
state.ThinkPadEC {
control.1 {
iface MIXER
name 'Console Playback Switch'
value true
comment {
access read
type BOOLEAN
count 1
}
}
}--endcollapse--
!!All Loaded Modules
!!------------------
Modulesnd_hda_intelsnd_hda_controlleracpi_call
arc4
iwldvm
uvcvideox86_pkg_temp_thermalintel_powerclampintel_rapl
ecbvideobuf2_vmallocvideobuf2_memops
coretempvideobuf2_corekvm_intel
mac80211
btusb
bluetooth
crc16snd_hda_codec_hdmi
i915v4l2_common
kvm
videodevsnd_hda_codec_realteksnd_hda_codec_generic
iwlwifi
cfg80211i2c_algo_bitdrm_kms_helper
drm
evdevthinkpad_acpi
wmi
pcspkrsnd_hda_codec
psmouse
nvramserio_raw
rfkillsnd_hwdepi2c_i801snd_pcmsnd_timer
sndtpm_tis
soundcore
tpmi2c_core
battery
ac
video
button
processorsch_fq
fuse
autofs4dm_cryptdm_modsd_modcrc_t10difcrct10dif_genericcrct10dif_pclmulcrct10dif_commoncrc32_pclmulcrc32c_intelghash_clmulni_intel
ahci
libahciehci_pcixhci_hcdehci_hcd
libatasdhci_pci
sdhciscsi_mod
usbcore
e1000emmc_coreusb_common
ptppps_core
thermalthermal_sys
!!Sysfs Files
!!-----------
/sys/class/sound/hwC0D0/init_pin_configs:0x12 0x90a601400x14 0x901701100x15 0x032110200x17 0x411111f00x18 0x03a118300x19 0x411111f00x1a 0x411111f00x1b 0x411111f00x1d 0x401382050x1e 0x411111f0
/sys/class/sound/hwC0D0/driver_pin_configs:0x19 0x23a110400x1b 0x2121103f
/sys/class/sound/hwC0D0/user_pin_configs:
/sys/class/sound/hwC0D0/init_verbs:
/sys/class/sound/hwC0D0/hints:mixer_nid = 0
/sys/class/sound/hwC0D3/init_pin_configs:0x05 0x185600100x06 0x185600200x07 0x18560030
/sys/class/sound/hwC0D3/driver_pin_configs:
/sys/class/sound/hwC0D3/user_pin_configs:
/sys/class/sound/hwC0D3/init_verbs:
/sys/class/sound/hwC0D3/hints:mixer_nid = 0
!!ALSA/HDA dmesg
!!--------------
[ 15.620516] [drm] Initialized drm 1.1.0 20060810 [ 15.750496] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X [ 15.810710] cfg80211: Calling CRDA to update world regulatory domain -- [ 15.858672] iwlwifi 0000:03:00.0: irq 46 for MSI/MSI-X [ 15.937398] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 15.937403] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 15.937406] sound hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0) [ 15.937408] sound hdaudioC0D0: mono: mono_out=0x0 [ 15.937410] sound hdaudioC0D0: inputs: [ 15.937413] sound hdaudioC0D0: Mic=0x18 [ 15.937415] sound hdaudioC0D0: Dock Mic=0x19 [ 15.937417] sound hdaudioC0D0: Internal Mic=0x12 [ 15.941372] usb 1-1.4: new full-speed USB device number 5 using ehci-pci -- [ 15.972070] Console: switching to colour dummy device 80x25 [ 15.980930] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input8 [ 15.981282] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 15.981677] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 15.981779] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 15.981879] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 15.982280] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 15.982802] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 15.983440] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 15.993203] i915 0000:00:02.0: irq 47 for MSI/MSI-X -- [ 9223.815516] PM: early resume of devices complete after 0.179 msecs [ 9223.817054] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X [ 9223.821360] sd 0:0:0:0: [sda] Starting disk -- [16902.718548] thinkpad_acpi: EC reports that Thermal Table has changed [17642.535959] sound hdaudioC0D0: hda-codec: reconfiguring [17642.535968] sound hdaudioC0D0: The codec is being used, can't reconfigure. [17648.622377] sound hdaudioC0D0: hda-codec: reconfiguring [17648.622390] sound hdaudioC0D0: The codec is being used, can't reconfigure. [17653.593640] sound hdaudioC0D0: hda-codec: reconfiguring [17653.774079] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [17653.774088] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [17653.774093] sound hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0) [17653.774096] sound hdaudioC0D0: mono: mono_out=0x0 [17653.774099] sound hdaudioC0D0: inputs: [17653.774103] sound hdaudioC0D0: Mic=0x18 [17653.774106] sound hdaudioC0D0: Dock Mic=0x19 [17653.774110] sound hdaudioC0D0: Internal Mic=0x12 [17653.781727] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20 [17653.781859] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21 [17653.781965] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22 [17653.783034] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input23 [17738.381478] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X [17738.392430] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [17738.392436] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [17738.392439] sound hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0) [17738.392442] sound hdaudioC0D0: mono: mono_out=0x0 [17738.392444] sound hdaudioC0D0: inputs: [17738.392447] sound hdaudioC0D0: Mic=0x18 [17738.392450] sound hdaudioC0D0: Dock Mic=0x19 [17738.392453] sound hdaudioC0D0: Internal Mic=0x12 [17738.404382] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input24 [17738.405074] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input25 [17738.405205] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input26 [17738.405330] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input27 [17738.405450] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input28 [17738.405574] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input29 [17738.405694] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input30 [17738.405824] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input31 [18364.339218] sound hdaudioC0D0: hda-codec: reconfiguring [18364.487827] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [18364.487836] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [18364.487842] sound hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0) [18364.487846] sound hdaudioC0D0: mono: mono_out=0x0 [18364.487850] sound hdaudioC0D0: inputs: [18364.487857] sound hdaudioC0D0: Mic=0x18 [18364.487862] sound hdaudioC0D0: Dock Mic=0x19 [18364.487868] sound hdaudioC0D0: Internal Mic=0x12 [18364.494857] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input33 [18364.494993] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input34 [18364.495663] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input35 [18364.495776] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input36 [18413.769537] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X [18413.779385] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [18413.779393] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [18413.779398] sound hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0) [18413.779401] sound hdaudioC0D0: mono: mono_out=0x0 [18413.779404] sound hdaudioC0D0: inputs: [18413.779409] sound hdaudioC0D0: Mic=0x18 [18413.779413] sound hdaudioC0D0: Dock Mic=0x19 [18413.779417] sound hdaudioC0D0: Internal Mic=0x12 [18413.790868] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input37 [18413.791430] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input38 [18413.791545] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input39 [18413.791656] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input40 [18413.791765] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input41 [18413.791871] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input42 [18413.791979] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input43 [18413.792090] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input44 [18521.453302] PM: Syncing filesystems ... done. -- [18522.594204] PM: early resume of devices complete after 0.300 msecs [18522.594666] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X [18522.603774] sd 0:0:0:0: [sda] Starting disk -- [18528.579816] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [18668.483113] sound hdaudioC0D0: hda-codec: reconfiguring [18668.643431] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [18668.643436] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [18668.643439] sound hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0) [18668.643441] sound hdaudioC0D0: mono: mono_out=0x0 [18668.643443] sound hdaudioC0D0: inputs: [18668.643446] sound hdaudioC0D0: Mic=0x18 [18668.643449] sound hdaudioC0D0: Dock Mic=0x19 [18668.643451] sound hdaudioC0D0: Internal Mic=0x12 [18668.653153] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input46 [18668.653407] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input47 [18668.653602] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input48 [18668.654583] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input49 [18914.483047] sound hdaudioC0D3: hda-codec: reconfiguring [18914.483053] sound hdaudioC0D3: The codec is being used, can't reconfigure. [18920.062663] sound hdaudioC0D3: hda-codec: reconfiguring [18920.148759] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input50 [18920.148923] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input51 [18920.149077] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input52
At Thu, 14 Aug 2014 16:39:14 +0200,
Quoted 26 lines · Julian Wollrath
Am Thu, 14 Aug 2014 16:09:51 +0200
schrieb Takashi Iwai <[email protected]>:Quoted 22 lines
At Thu, 14 Aug 2014 16:07:37 +0200,
Quoted 20 lines · Julian Wollrath
Quoted 20 lines
Quoted 8 lines
Quoted 6 lines
Quoted 4 lines
Simple mixer control 'Mic',0
Front Left: Playback 0 [0%] [-34.50dB] [on]
Front Right: Playback 0 [0%] [-34.50dB] [on]This plays any noise from the mic input.
Turning it off makes no difference since capture is turned off anyway:
This is a loopback mixer element, it has nothing to do with capture stream.
The likely culprit of the static noises is the signal from the analog loopback. In some cases, you can disable the whole loopback via "Loopback Mixing" mixer element on the fly. In some cases, you'd need to disable each mixer input (e.g. "Mic Playback Switch"). In some cases (e.g. on some Sony and Dell laptops), you'd need to disable the complete analog loopback at the initialization.
Quoted 8 lines
Quoted 7 lines
Quoted 4 lines
Quoted 3 lines
The last one can be done via the early patching or sysfs reconfiguration, pass "
mixer_nid= 0" hint. See HD-Audio.txt for a brief instruction.Sadly, that did not help.
Give
alsa-info.shoutput after your change to verify whether you did correctly.Here it is, cheers:
Thanks. The setup looks OK, the path is:
DAC (0x02) -> mixer (0x0c) -> mixer (0x14)
and the mixer mutes the loopback path (index 1).
Is it the state where you still hear the static noise?
Also, what if you use the module option for snd-hda-intel model=nofixup or model=generic?
Takashi
Am Thu, 14 Aug 2014 16:47:46 +0200
schrieb Takashi Iwai <[email protected]>:
Quoted 35 lines
At Thu, 14 Aug 2014 16:39:14 +0200,
Quoted 33 lines · Julian Wollrath
Am Thu, 14 Aug 2014 16:09:51 +0200
schrieb Takashi Iwai <[email protected]>:Quoted 29 lines
At Thu, 14 Aug 2014 16:07:37 +0200,
Quoted 20 lines · Julian Wollrath
Quoted 20 lines
Quoted 8 lines
Quoted 6 lines
Quoted 4 lines
Simple mixer control 'Mic',0
Front Left: Playback 0 [0%] [-34.50dB] [on]
Front Right: Playback 0 [0%] [-34.50dB] [on]This plays any noise from the mic input.
Turning it off makes no difference since capture is turned off anyway:
This is a loopback mixer element, it has nothing to do with capture stream.
The likely culprit of the static noises is the signal from the analog loopback. In some cases, you can disable the whole loopback via "Loopback Mixing" mixer element on the fly. In some cases, you'd need to disable each mixer input (e.g. "Mic Playback Switch"). In some cases (e.g. on some Sony and Dell laptops), you'd need to disable the complete analog loopback at the initialization.
Quoted 4 lines
Quoted 3 lines
The last one can be done via the early patching or sysfs reconfiguration, pass "
mixer_nid= 0" hint. See HD-Audio.txt for a brief instruction.Sadly, that did not help.
Give
alsa-info.shoutput after your change to verify whether you did correctly.
Quoted 7 lines
Quoted 1 line
Here it is, cheers:
Thanks. The setup looks OK, the path is:
DAC (0x02) -> mixer (0x0c) -> mixer (0x14)
and the mixer mutes the loopback path (index 1).Is it the state where you still hear the static noise?
Yes, the alsa-info.sh script was executed, while hearing the static noise.
Quoted 2 lines
Also, what if you use the module option for snd-hda-intel model=nofixup or model=generic?
That did not change anything either. Passing the "mixer_nid = 0" hint also did not get rid of the static noise, when loading snd-hda-intel with model=nofixup resp. model=generic.
Cheers,
Julian
At Thu, 14 Aug 2014 17:04:59 +0200,
Quoted 41 lines · Julian Wollrath
Am Thu, 14 Aug 2014 16:47:46 +0200
schrieb Takashi Iwai <[email protected]>:Quoted 37 lines
At Thu, 14 Aug 2014 16:39:14 +0200,
Quoted 34 lines · Julian Wollrath
Am Thu, 14 Aug 2014 16:09:51 +0200
schrieb Takashi Iwai <[email protected]>:Quoted 22 lines
At Thu, 14 Aug 2014 16:07:37 +0200,
Quoted 20 lines · Julian Wollrath
Quoted 20 lines
Quoted 8 lines
Quoted 6 lines
Quoted 4 lines
Simple mixer control 'Mic',0
Front Left: Playback 0 [0%] [-34.50dB] [on]
Front Right: Playback 0 [0%] [-34.50dB] [on]This plays any noise from the mic input.
Turning it off makes no difference since capture is turned off anyway:
This is a loopback mixer element, it has nothing to do with capture stream.
The likely culprit of the static noises is the signal from the analog loopback. In some cases, you can disable the whole loopback via "Loopback Mixing" mixer element on the fly. In some cases, you'd need to disable each mixer input (e.g. "Mic Playback Switch"). In some cases (e.g. on some Sony and Dell laptops), you'd need to disable the complete analog loopback at the initialization.
Quoted 7 lines
Quoted 4 lines
Quoted 3 lines
The last one can be done via the early patching or sysfs reconfiguration, pass "
mixer_nid= 0" hint. See HD-Audio.txt for a brief instruction.Sadly, that did not help.
Give
alsa-info.shoutput after your change to verify whether you did correctly.Here it is, cheers:
Quoted 7 lines
Quoted 5 lines
Thanks. The setup looks OK, the path is:
DAC (0x02) -> mixer (0x0c) -> mixer (0x14)
and the mixer mutes the loopback path (index 1).Is it the state where you still hear the static noise?
Yes, the
alsa-info.shscript was executed, while hearing the static noise.
OK. And if you mute "Speaker" or "Headphone", the noise is gone, too, right?
Quoted 5 lines
Quoted 2 lines
Also, what if you use the module option for snd-hda-intel model=nofixup or model=generic?
That did not change anything either. Passing the "
mixer_nid= 0" hint also did not get rid of the static noise, when loading snd-hda-intel with model=nofixup resp. model=generic.
Did you reboot with setting the option in /etc/modprobe.d/*? Reloading the module might not work for such a problem.
In either way, there should be some difference in alsa-info.sh output, e.g. more (or less) mixer items with the model option.
Takashi
Am Thu, 14 Aug 2014 17:11:32 +0200
schrieb Takashi Iwai <[email protected]>:
Quoted 47 lines
At Thu, 14 Aug 2014 17:04:59 +0200,
Quoted 45 lines · Julian Wollrath
Am Thu, 14 Aug 2014 16:47:46 +0200
schrieb Takashi Iwai <[email protected]>:Quoted 41 lines
At Thu, 14 Aug 2014 16:39:14 +0200,
Quoted 26 lines · Julian Wollrath
Am Thu, 14 Aug 2014 16:09:51 +0200
schrieb Takashi Iwai <[email protected]>:Quoted 22 lines
At Thu, 14 Aug 2014 16:07:37 +0200,
Quoted 20 lines · Julian Wollrath
Quoted 20 lines
Quoted 8 lines
Quoted 6 lines
Quoted 4 lines
Simple mixer control 'Mic',0
Front Left: Playback 0 [0%] [-34.50dB] [on]
Front Right: Playback 0 [0%] [-34.50dB] [on]This plays any noise from the mic input.
Turning it off makes no difference since capture is turned off anyway:
This is a loopback mixer element, it has nothing to do with capture stream.
The likely culprit of the static noises is the signal from the analog loopback. In some cases, you can disable the whole loopback via "Loopback Mixing" mixer element on the fly. In some cases, you'd need to disable each mixer input (e.g. "Mic Playback Switch"). In some cases (e.g. on some Sony and Dell laptops), you'd need to disable the complete analog loopback at the initialization.
Quoted 8 lines
Quoted 7 lines
Quoted 4 lines
Quoted 3 lines
The last one can be done via the early patching or sysfs reconfiguration, pass "
mixer_nid= 0" hint. See HD-Audio.txt for a brief instruction.Sadly, that did not help.
Give
alsa-info.shoutput after your change to verify whether you did correctly.Here it is, cheers:
Thanks. The setup looks OK, the path is:
DAC (0x02) -> mixer (0x0c) -> mixer (0x14)
and the mixer mutes the loopback path (index 1).
Quoted 6 lines
Quoted 3 lines
Quoted 1 line
Is it the state where you still hear the static noise?
Yes, the
alsa-info.shscript was executed, while hearing the static noise.OK. And if you mute "Speaker" or "Headphone", the noise is gone, too, right?
No, if I mute "Speaker" (the internal laptop speaker) it is not gone. It is only gone, if I mute "Master" or have a headphone plugged in and mute "Headphone" or "Master".
More fascinating, it is not present, if the speaker is not muted and I disable powersaving via "echo '0' > '/sys/module/snd_hda_intel/parameters/power_save'" but even then, it is still present on the headphone.
Quoted 8 lines
Quoted 5 lines
Quoted 2 lines
Also, what if you use the module option for snd-hda-intel model=nofixup or model=generic?
That did not change anything either. Passing the "
mixer_nid= 0" hint also did not get rid of the static noise, when loading snd-hda-intel with model=nofixup resp. model=generic.Did you reboot with setting the option in
/etc/modprobe.d/*? Reloading the module might not work for such a problem.
No, I just unloaded every sound-related module and than loaded the module via "modprobe snd-hda-intel model=..." again.
Quoted 2 lines
In either way, there should be some difference in
alsa-info.shoutput, e.g. more (or less) mixer items with the model option.
The difference is their, all the "Dock ..." entries were missing, when loading with the model="..." option.
Cheers,
Julian
Am Thu, 14 Aug 2014 17:26:58 +0200
schrieb Julian Wollrath <[email protected]>:
Quoted 57 lines
Am Thu, 14 Aug 2014 17:11:32 +0200
schrieb Takashi Iwai <[email protected]>:Quoted 48 lines
At Thu, 14 Aug 2014 17:04:59 +0200,
Quoted 46 lines · Julian Wollrath
Am Thu, 14 Aug 2014 16:47:46 +0200
schrieb Takashi Iwai <[email protected]>:Quoted 42 lines
At Thu, 14 Aug 2014 16:39:14 +0200,
Quoted 27 lines · Julian Wollrath
Am Thu, 14 Aug 2014 16:09:51 +0200
schrieb Takashi Iwai <[email protected]>:Quoted 23 lines
At Thu, 14 Aug 2014 16:07:37 +0200,
Quoted 21 lines · Julian Wollrath
Quoted 21 lines
Quoted 8 lines
Quoted 6 lines
Quoted 4 lines
Simple mixer control 'Mic',0
Front Left: Playback 0 [0%] [-34.50dB] [on]
Front Right: Playback 0 [0%] [-34.50dB] [on]This plays any noise from the mic input.
Turning it off makes no difference since capture is turned off anyway:
This is a loopback mixer element, it has nothing to do with capture stream.
The likely culprit of the static noises is the signal from the analog loopback. In some cases, you can disable the whole loopback via "Loopback Mixing" mixer element on the fly. In some cases, you'd need to disable each mixer input (e.g. "Mic Playback Switch"). In some cases (e.g. on some Sony and Dell laptops), you'd need to disable the complete analog loopback at the initialization.
Quoted 8 lines
Quoted 7 lines
Quoted 4 lines
Quoted 3 lines
The last one can be done via the early patching or sysfs reconfiguration, pass "
mixer_nid= 0" hint. See HD-Audio.txt for a brief instruction.Sadly, that did not help.
Give
alsa-info.shoutput after your change to verify whether you did correctly.Here it is, cheers:
Thanks. The setup looks OK, the path is:
DAC (0x02) -> mixer (0x0c) -> mixer (0x14)
and the mixer mutes the loopback path (index 1).Quoted 6 lines
Quoted 3 lines
Quoted 1 line
Is it the state where you still hear the static noise?
Yes, the
alsa-info.shscript was executed, while hearing the static noise.OK. And if you mute "Speaker" or "Headphone", the noise is gone, too, right?
Quoted 8 lines
No, if I mute "Speaker" (the internal laptop speaker) it is not gone. It is only gone, if I mute "Master" or have a headphone plugged in and mute "Headphone" or "Master".
More fascinating, it is not present, if the speaker is not muted and I disable powersaving via "echo '0' > '
/sys/module/snd_hda_intel/parameters/power_save'" but even then, it is still present on the headphone.
And it is also present, if I mute only the speaker.
Quoted 18 lines
Quoted 8 lines
Quoted 5 lines
Quoted 2 lines
Also, what if you use the module option for snd-hda-intel model=nofixup or model=generic?
That did not change anything either. Passing the "
mixer_nid= 0" hint also did not get rid of the static noise, when loading snd-hda-intel with model=nofixup resp. model=generic.Did you reboot with setting the option in
/etc/modprobe.d/*? Reloading the module might not work for such a problem.No, I just unloaded every sound-related module and than loaded the module via "modprobe snd-hda-intel model=..." again.
Quoted 2 lines
In either way, there should be some difference in
alsa-info.shoutput, e.g. more (or less) mixer items with the model option.The difference is their, all the "Dock ..." entries were missing, when loading with the model="..." option.
Cheers,
Julian
At Thu, 14 Aug 2014 17:26:58 +0200,
Quoted 52 lines · Julian Wollrath
Am Thu, 14 Aug 2014 17:11:32 +0200
schrieb Takashi Iwai <[email protected]>:Quoted 48 lines
At Thu, 14 Aug 2014 17:04:59 +0200,
Quoted 46 lines · Julian Wollrath
Am Thu, 14 Aug 2014 16:47:46 +0200
schrieb Takashi Iwai <[email protected]>:Quoted 42 lines
At Thu, 14 Aug 2014 16:39:14 +0200,
Quoted 26 lines · Julian Wollrath
Am Thu, 14 Aug 2014 16:09:51 +0200
schrieb Takashi Iwai <[email protected]>:Quoted 22 lines
At Thu, 14 Aug 2014 16:07:37 +0200,
Quoted 20 lines · Julian Wollrath
Quoted 20 lines
Quoted 8 lines
Quoted 6 lines
Quoted 4 lines
Simple mixer control 'Mic',0
Front Left: Playback 0 [0%] [-34.50dB] [on]
Front Right: Playback 0 [0%] [-34.50dB] [on]This plays any noise from the mic input.
Turning it off makes no difference since capture is turned off anyway:
This is a loopback mixer element, it has nothing to do with capture stream.
The likely culprit of the static noises is the signal from the analog loopback. In some cases, you can disable the whole loopback via "Loopback Mixing" mixer element on the fly. In some cases, you'd need to disable each mixer input (e.g. "Mic Playback Switch"). In some cases (e.g. on some Sony and Dell laptops), you'd need to disable the complete analog loopback at the initialization.
Quoted 8 lines
Quoted 7 lines
Quoted 4 lines
Quoted 3 lines
The last one can be done via the early patching or sysfs reconfiguration, pass "
mixer_nid= 0" hint. See HD-Audio.txt for a brief instruction.Sadly, that did not help.
Give
alsa-info.shoutput after your change to verify whether you did correctly.Here it is, cheers:
Thanks. The setup looks OK, the path is:
DAC (0x02) -> mixer (0x0c) -> mixer (0x14)
and the mixer mutes the loopback path (index 1).Is it the state where you still hear the static noise?
Quoted 8 lines
Quoted 5 lines
Quoted 2 lines
Yes, the
alsa-info.shscript was executed, while hearing the static noise.OK. And if you mute "Speaker" or "Headphone", the noise is gone, too, right?
No, if I mute "Speaker" (the internal laptop speaker) it is not gone. It is only gone, if I mute "Master" or have a headphone plugged in and mute "Headphone" or "Master".
Interesting. The "Speaker" mute changes "Speaker Playback Switch", and as you can see in alsa-info.sh output, this toggles the mute of the speaker pin NID 0x14, i.e. the endpoint. If "Master" influences, it means to mute *both* Headphone and Speaker mutes would work. Could you check this?
Quoted 4 lines
More fascinating, it is not present, if the speaker is not muted and I disable powersaving via "echo '0' > '
/sys/module/snd_hda_intel/parameters/power_save'" but even then, it is still present on the headphone.
Hm. Is the noise audible when you playback a PCM stream, too? For example, you can play a silent stream.
Quoted 10 lines
Quoted 8 lines
Quoted 5 lines
Quoted 2 lines
Also, what if you use the module option for snd-hda-intel model=nofixup or model=generic?
That did not change anything either. Passing the "
mixer_nid= 0" hint also did not get rid of the static noise, when loading snd-hda-intel with model=nofixup resp. model=generic.Did you reboot with setting the option in
/etc/modprobe.d/*? Reloading the module might not work for such a problem.No, I just unloaded every sound-related module and than loaded the module via "modprobe snd-hda-intel model=..." again.
Then always test with reboot. The problem is about the vendor-specific setups, and it's often sticky unless the cold boot. At best, do the cold boot. The warm boot doesn't cure always.
Quoted 4 lines
Quoted 2 lines
In either way, there should be some difference in
alsa-info.shoutput, e.g. more (or less) mixer items with the model option.The difference is their, all the "Dock ..." entries were missing, when loading with the model="..." option.
Yes, and you should also see the difference in the kernel messages.
Another thing to check is to swap the DAC assignment. There was a similar problem on some Sony laptops, and we had to swap the DAC assignment since the hardware seems to have some implicit assumption of the DAC. A test patch is below.
Takashi
---
sound/pci/hda/patch_realtek.c +24 -1
@@ -3280,6 +3280,22 @@ static void alc269_fixup_pincfg_no_hp_to_lineout(struct hda_codec *codec, spec->parse_flags =HDA_PINCFG_NO_HP_FIXUP ; } +static void alc269_fixup_thinkpad_dac_bind (struct hda_codec *codec, +const struct hda_fixup *fix, +int action) +{ +struct alc_spec *spec = codec->spec; +static hda_nid_t preferred_pairs[] = { +0x15 ,0x02 , +0x1b ,0x02 , +0x14 ,0x03 , +0 , + }; + +if (action ==HDA_FIXUP_ACT_PRE_PROBE ) + spec->gen.preferred_dacs = preferred_pairs; +} +static void alc269_fixup_hweq (struct hda_codec *codec,const struct hda_fixup *fix,int action) {
@@ -4358,6 +4374,7 @@ enum {ALC269_FIXUP_HP_LINE1_MIC1_LED ,ALC269_FIXUP_INV_DMIC ,ALC269_FIXUP_LENOVO_DOCK , +ALC269_FIXUP_THINKPAD_DAC_BIND ,ALC269_FIXUP_NO_SHUTUP ,ALC286_FIXUP_SONY_MIC_NO_PRESENCE , ALC269_FIXUP_PINCFG_NO_HP_TO_LINEOUT,
@@ -4576,6 +4593,12 @@ static const struct hda_fixup alc269_fixups[] = { .chained = true, .chain_id =ALC269_FIXUP_PINCFG_NO_HP_TO_LINEOUT }, + [ALC269_FIXUP_THINKPAD_DAC_BIND] = { + .type = HDA_FIXUP_FUNC, + .v.func = alc269_fixup_thinkpad_dac_bind, + .chained = true, + .chain_id = ALC269_FIXUP_LENOVO_DOCK, + }, [ALC269_FIXUP_PINCFG_NO_HP_TO_LINEOUT] = { .type = HDA_FIXUP_FUNC, .v.func = alc269_fixup_pincfg_no_hp_to_lineout,
@@ -5044,7 +5067,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {SND_PCI_QUIRK (0x17aa ,0x21ca ,"Thinkpad L412" ,ALC269_FIXUP_SKU_IGNORE ),SND_PCI_QUIRK (0x17aa ,0x21e9 ,"Thinkpad Edge 15" ,ALC269_FIXUP_SKU_IGNORE ),SND_PCI_QUIRK (0x17aa ,0x21f6 ,"Thinkpad T530" ,ALC269_FIXUP_LENOVO_DOCK ), -SND_PCI_QUIRK (0x17aa ,0x21fa ,"Thinkpad X230" ,ALC269_FIXUP_LENOVO_DOCK ), +SND_PCI_QUIRK (0x17aa ,0x21fa ,"Thinkpad X230" ,ALC269_FIXUP_THINKPAD_DAC_BIND ),SND_PCI_QUIRK (0x17aa ,0x21f3 ,"Thinkpad T430" ,ALC269_FIXUP_LENOVO_DOCK ),SND_PCI_QUIRK (0x17aa ,0x21fb ,"Thinkpad T430s" ,ALC269_FIXUP_LENOVO_DOCK ), SND_PCI_QUIRK(0x17aa, 0x2203, "Thinkpad X230 Tablet", ALC269_FIXUP_LENOVO_DOCK),
Quoted 14 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Thanks. The setup looks OK, the path is:
DAC (0x02) -> mixer (0x0c) -> mixer (0x14)
and the mixer mutes the loopback path (index 1).Is it the state where you still hear the static noise?
Quoted 8 lines
Quoted 5 lines
Quoted 2 lines
Yes, the
alsa-info.shscript was executed, while hearing the static noise.OK. And if you mute "Speaker" or "Headphone", the noise is gone, too, right?
No, if I mute "Speaker" (the internal laptop speaker) it is not gone. It is only gone, if I mute "Master" or have a headphone plugged in and mute "Headphone" or "Master".
Quoted 5 lines
Interesting. The "Speaker" mute changes "Speaker Playback Switch", and as you can see in
alsa-info.shoutput, this toggles the mute of the speaker pin NID0x14, i.e. the endpoint. If "Master" influences, it means to mute *both* Headphone and Speaker mutes would work. Could you check this?
Muting both Headphone and Speaker does not work for the static noise on the speaker.
Quoted 7 lines
Quoted 4 lines
More fascinating, it is not present, if the speaker is not muted and I disable powersaving via "echo '0' > '
/sys/module/snd_hda_intel/parameters/power_save'" but even then, it is still present on the headphone.Hm. Is the noise audible when you playback a PCM stream, too? For example, you can play a silent stream.
Yes, then it is audible.
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 5 lines
Quoted 2 lines
Also, what if you use the module option for snd-hda-intel model=nofixup or model=generic?
That did not change anything either. Passing the "
mixer_nid= 0" hint also did not get rid of the static noise, when loading snd-hda-intel with model=nofixup resp. model=generic.
Quoted 8 lines
Quoted 4 lines
Quoted 2 lines
Did you reboot with setting the option in
/etc/modprobe.d/*? Reloading the module might not work for such a problem.No, I just unloaded every sound-related module and than loaded the module via "modprobe snd-hda-intel model=..." again.
Then always test with reboot. The problem is about the vendor-specific setups, and it's often sticky unless the cold boot. At best, do the cold boot. The warm boot doesn't cure always.
Ok, I tested with a reboot but that did not help.
Quoted 11 lines
Quoted 4 lines
Quoted 2 lines
In either way, there should be some difference in
alsa-info.shoutput, e.g. more (or less) mixer items with the model option.The difference is their, all the "Dock ..." entries were missing, when loading with the model="..." option.
Yes, and you should also see the difference in the kernel messages.
Another thing to check is to swap the DAC assignment. There was a similar problem on some Sony laptops, and we had to swap the DAC assignment since the hardware seems to have some implicit assumption of the DAC. A test patch is below.
Thanks, but sadly the patch did not help.
Cheers,
Julian
Quoted 70 lines
Takashi
---
(quoted diff) +0
-0
b/sound/pci/hda/patch_realtek.cindex6b38ec3c6e57..10c47a0e6c70100644 ---a/sound/pci/hda/patch_realtek.c
+++b/sound/pci/hda/patch_realtek.csound/pci/hda/patch_realtek.c +16
-0@@ -3280,6 +3280,22 @@ static void alc269_fixup_pincfg_no_hp_to_lineout(struct hda_codec *codec, spec->parse_flags = HDA_PINCFG_NO_HP_FIXUP; } +static void alc269_fixup_thinkpad_dac_bind (struct hda_codec *codec, +const struct hda_fixup *fix, +int action) +{ +struct alc_spec *spec = codec->spec; +static hda_nid_t preferred_pairs[] = { +0x15 ,0x02 , +0x1b ,0x02 , +0x14 ,0x03 , +0 , + }; + +if (action ==HDA_FIXUP_ACT_PRE_PROBE ) + spec->gen.preferred_dacs = preferred_pairs; +} +static void alc269_fixup_hweq (struct hda_codec *codec, const struct hda_fixup *fix, intaction) {
sound/pci/hda/patch_realtek.c +7
-0@@ -4358,6 +4374,7 @@ enum {ALC269_FIXUP_HP_LINE1_MIC1_LED ,ALC269_FIXUP_INV_DMIC ,ALC269_FIXUP_LENOVO_DOCK , +ALC269_FIXUP_THINKPAD_DAC_BIND ,ALC269_FIXUP_NO_SHUTUP ,ALC286_FIXUP_SONY_MIC_NO_PRESENCE , ALC269_FIXUP_PINCFG_NO_HP_TO_LINEOUT,@@ -4576,6 +4593,12 @@ static const struct hda_fixup alc269_fixups[] = { .chained = true, .chain_id =ALC269_FIXUP_PINCFG_NO_HP_TO_LINEOUT }, + [ALC269_FIXUP_THINKPAD_DAC_BIND] = { + .type = HDA_FIXUP_FUNC, + .v.func = alc269_fixup_thinkpad_dac_bind, + .chained = true, + .chain_id = ALC269_FIXUP_LENOVO_DOCK, + }, [ALC269_FIXUP_PINCFG_NO_HP_TO_LINEOUT] = { .type = HDA_FIXUP_FUNC, .v.func = alc269_fixup_pincfg_no_hp_to_lineout,@@ -5044,7 +5067,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x17aa, 0x21ca, "Thinkpad L412",
ALC269_FIXUP_SKU_IGNORE),SND_PCI_QUIRK(0x17aa, 0x21e9, "Thinkpad Edge 15", ALC269_FIXUP_SKU_IGNORE),SND_PCI_QUIRK(0x17aa, 0x21f6, "Thinkpad T530", ALC269_FIXUP_LENOVO_DOCK),(quoted diff) +0
-1- SND_PCI_QUIRK(0x17aa, 0x21fa, "Thinkpad X230",
ALC269_FIXUP_LENOVO_DOCK),(quoted diff) +1
-0+ SND_PCI_QUIRK(0x17aa, 0x21fa, "Thinkpad X230",
ALC269_FIXUP_THINKPAD_DAC_BIND),SND_PCI_QUIRK(0x17aa, 0x21f3, "Thinkpad T430", ALC269_FIXUP_LENOVO_DOCK),SND_PCI_QUIRK(0x17aa, 0x21fb, "Thinkpad T430s", ALC269_FIXUP_LENOVO_DOCK),SND_PCI_QUIRK(0x17aa, 0x2203, "Thinkpad X230 Tablet", ALC269_FIXUP_LENOVO_DOCK), _______________________________________________ Alsa-devel mailing list [email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
At Thu, 14 Aug 2014 18:29:19 +0200,
Quoted 15 lines · Julian Wollrath
Quoted 15 lines
Quoted 14 lines
Quoted 11 lines
Quoted 8 lines
Quoted 6 lines
Thanks. The setup looks OK, the path is:
DAC (0x02) -> mixer (0x0c) -> mixer (0x14)
and the mixer mutes the loopback path (index 1).Is it the state where you still hear the static noise?
Yes, the
alsa-info.shscript was executed, while hearing the static noise.OK. And if you mute "Speaker" or "Headphone", the noise is gone, too, right?
No, if I mute "Speaker" (the internal laptop speaker) it is not gone. It is only gone, if I mute "Master" or have a headphone plugged in and mute "Headphone" or "Master".
Quoted 7 lines
Quoted 5 lines
Interesting. The "Speaker" mute changes "Speaker Playback Switch", and as you can see in
alsa-info.shoutput, this toggles the mute of the speaker pin NID0x14, i.e. the endpoint. If "Master" influences, it means to mute *both* Headphone and Speaker mutes would work. Could you check this?Muting both Headphone and Speaker does not work for the static noise on the speaker.
Then check what's the difference in codec proc content between the two
cases: Master=mute and Headphone+Speaker=mute.
Quoted 30 lines
Quoted 7 lines
Quoted 4 lines
More fascinating, it is not present, if the speaker is not muted and I disable powersaving via "echo '0' > '
/sys/module/snd_hda_intel/parameters/power_save'" but even then, it is still present on the headphone.Hm. Is the noise audible when you playback a PCM stream, too? For example, you can play a silent stream.
Yes, then it is audible.
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 5 lines
Quoted 2 lines
Also, what if you use the module option for snd-hda-intel model=nofixup or model=generic?
That did not change anything either. Passing the "
mixer_nid= 0" hint also did not get rid of the static noise, when loading snd-hda-intel with model=nofixup resp. model=generic.Quoted 8 lines
Quoted 4 lines
Quoted 2 lines
Did you reboot with setting the option in
/etc/modprobe.d/*? Reloading the module might not work for such a problem.No, I just unloaded every sound-related module and than loaded the module via "modprobe snd-hda-intel model=..." again.
Then always test with reboot. The problem is about the vendor-specific setups, and it's often sticky unless the cold boot. At best, do the cold boot. The warm boot doesn't cure always.
Ok, I tested with a reboot but that did not help.
Quoted 5 lines
Quoted 4 lines
Quoted 2 lines
In either way, there should be some difference in
alsa-info.shoutput, e.g. more (or less) mixer items with the model option.The difference is their, all the "Dock ..." entries were missing, when loading with the model="..." option.
Quoted 7 lines
Quoted 6 lines
Yes, and you should also see the difference in the kernel messages.
Another thing to check is to swap the DAC assignment. There was a similar problem on some Sony laptops, and we had to swap the DAC assignment since the hardware seems to have some implicit assumption of the DAC. A test patch is below.
Thanks, but sadly the patch did not help.
I have no much other clue, so far. The rest you can test is to toggle EAPD, toggle GPIO pin, and change the different pin setups, e.g. put VREF or HP amp bit on any (even unused) pins.
Takashi
Am Fri, 15 Aug 2014 08:02:38 +0200
schrieb Takashi Iwai <[email protected]>:
Quoted 67 lines
At Thu, 14 Aug 2014 18:29:19 +0200,
Quoted 15 lines · Julian Wollrath
Quoted 15 lines
Quoted 14 lines
Quoted 11 lines
Quoted 8 lines
Quoted 6 lines
Thanks. The setup looks OK, the path is:
DAC (0x02) -> mixer (0x0c) -> mixer (0x14)
and the mixer mutes the loopback path (index 1).Is it the state where you still hear the static noise?
Yes, the
alsa-info.shscript was executed, while hearing the static noise.OK. And if you mute "Speaker" or "Headphone", the noise is gone, too, right?
No, if I mute "Speaker" (the internal laptop speaker) it is not gone. It is only gone, if I mute "Master" or have a headphone plugged in and mute "Headphone" or "Master".
Quoted 7 lines
Quoted 5 lines
Interesting. The "Speaker" mute changes "Speaker Playback Switch", and as you can see in
alsa-info.shoutput, this toggles the mute of the speaker pin NID0x14, i.e. the endpoint. If "Master" influences, it means to mute *both* Headphone and Speaker mutes would work. Could you check this?Muting both Headphone and Speaker does not work for the static noise on the speaker.
Then check what's the difference in codec proc content between the two
cases: Master=mute and Headphone+Speaker=mute.Quoted 39 lines
Quoted 7 lines
Quoted 4 lines
More fascinating, it is not present, if the speaker is not muted and I disable powersaving via "echo '0' > '
/sys/module/snd_hda_intel/parameters/power_save'" but even then, it is still present on the headphone.Hm. Is the noise audible when you playback a PCM stream, too? For example, you can play a silent stream.
Yes, then it is audible.
Quoted 9 lines
Quoted 9 lines
Quoted 9 lines
Quoted 6 lines
Quoted 2 lines
Also, what if you use the module option for snd-hda-intel model=nofixup or model=generic?
That did not change anything either. Passing the "
mixer_nid= 0" hint also did not get rid of the static noise, when loading snd-hda-intel with model=nofixup resp. model=generic.Did you reboot with setting the option in
/etc/modprobe.d/*? Reloading the module might not work for such a problem.Quoted 7 lines
Quoted 2 lines
No, I just unloaded every sound-related module and than loaded the module via "modprobe snd-hda-intel model=..." again.
Then always test with reboot. The problem is about the vendor-specific setups, and it's often sticky unless the cold boot. At best, do the cold boot. The warm boot doesn't cure always.
Ok, I tested with a reboot but that did not help.
Quoted 12 lines
Quoted 4 lines
Quoted 2 lines
In either way, there should be some difference in
alsa-info.shoutput, e.g. more (or less) mixer items with the model option.The difference is their, all the "Dock ..." entries were missing, when loading with the model="..." option.
Yes, and you should also see the difference in the kernel messages.
Another thing to check is to swap the DAC assignment. There was a similar problem on some Sony laptops, and we had to swap the DAC assignment since the hardware seems to have some implicit assumption of the DAC. A test patch is below.
Quoted 5 lines
Quoted 1 line
Thanks, but sadly the patch did not help.
I have no much other clue, so far. The rest you can test is to toggle EAPD, toggle GPIO pin, and change the different pin setups, e.g. put VREF or HP amp bit on any (even unused) pins.
Toggling the EAPD got rid of the noise but I also did not get any sound output anymore. Playing with the other pins got me nowhere. Seems like I have to live with the noise.
Nevertheless, thank you for your help.
Cheers,
Julian
Quoted 3 lines
Takashi
At Fri, 22 Aug 2014 18:18:28 +0200,
Quoted 71 lines · Julian Wollrath
Am Fri, 15 Aug 2014 08:02:38 +0200
schrieb Takashi Iwai <[email protected]>:Quoted 67 lines
At Thu, 14 Aug 2014 18:29:19 +0200,
Quoted 15 lines · Julian Wollrath
Quoted 15 lines
Quoted 14 lines
Quoted 11 lines
Quoted 8 lines
Quoted 6 lines
Thanks. The setup looks OK, the path is:
DAC (0x02) -> mixer (0x0c) -> mixer (0x14)
and the mixer mutes the loopback path (index 1).Is it the state where you still hear the static noise?
Yes, the
alsa-info.shscript was executed, while hearing the static noise.OK. And if you mute "Speaker" or "Headphone", the noise is gone, too, right?
No, if I mute "Speaker" (the internal laptop speaker) it is not gone. It is only gone, if I mute "Master" or have a headphone plugged in and mute "Headphone" or "Master".
Quoted 7 lines
Quoted 5 lines
Interesting. The "Speaker" mute changes "Speaker Playback Switch", and as you can see in
alsa-info.shoutput, this toggles the mute of the speaker pin NID0x14, i.e. the endpoint. If "Master" influences, it means to mute *both* Headphone and Speaker mutes would work. Could you check this?Muting both Headphone and Speaker does not work for the static noise on the speaker.
Then check what's the difference in codec proc content between the two
cases: Master=mute and Headphone+Speaker=mute.Quoted 39 lines
Quoted 7 lines
Quoted 4 lines
More fascinating, it is not present, if the speaker is not muted and I disable powersaving via "echo '0' > '
/sys/module/snd_hda_intel/parameters/power_save'" but even then, it is still present on the headphone.Hm. Is the noise audible when you playback a PCM stream, too? For example, you can play a silent stream.
Yes, then it is audible.
Quoted 9 lines
Quoted 9 lines
Quoted 9 lines
Quoted 6 lines
Quoted 2 lines
Also, what if you use the module option for snd-hda-intel model=nofixup or model=generic?
That did not change anything either. Passing the "
mixer_nid= 0" hint also did not get rid of the static noise, when loading snd-hda-intel with model=nofixup resp. model=generic.Did you reboot with setting the option in
/etc/modprobe.d/*? Reloading the module might not work for such a problem.Quoted 7 lines
Quoted 2 lines
No, I just unloaded every sound-related module and than loaded the module via "modprobe snd-hda-intel model=..." again.
Then always test with reboot. The problem is about the vendor-specific setups, and it's often sticky unless the cold boot. At best, do the cold boot. The warm boot doesn't cure always.
Ok, I tested with a reboot but that did not help.
Quoted 12 lines
Quoted 4 lines
Quoted 2 lines
In either way, there should be some difference in
alsa-info.shoutput, e.g. more (or less) mixer items with the model option.The difference is their, all the "Dock ..." entries were missing, when loading with the model="..." option.
Yes, and you should also see the difference in the kernel messages.
Another thing to check is to swap the DAC assignment. There was a similar problem on some Sony laptops, and we had to swap the DAC assignment since the hardware seems to have some implicit assumption of the DAC. A test patch is below.
Quoted 8 lines
Quoted 5 lines
Quoted 1 line
Thanks, but sadly the patch did not help.
I have no much other clue, so far. The rest you can test is to toggle EAPD, toggle GPIO pin, and change the different pin setups, e.g. put VREF or HP amp bit on any (even unused) pins.
Toggling the EAPD got rid of the noise but I also did not get any sound output anymore. Playing with the other pins got me nowhere. Seems like I have to live with the noise.
Possibly a combination of something might work, but it needs really many trial-and-error. In anyway, if you hit a good state coincidentally, don't forget to take alsa-info.sh snapshot.
Takashi