Skip to contentSkip to conversation

conf/ucm: chtrt5645: Add UCM config for chtrt5645

PATCH In review Stephen Just 2 participants 2 messages Jul 4, 2016 – Jul 5, 2016

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 conf/ucm: chtrt5645: Add UCM config for chtrt5645

Add a UCM configuration for the rt5645 codec on Intel's Cherry-Trail platform. Tested on the Microsoft Surface 3.

---
 configure.ac                          |   1 +
 src/conf/ucm/Makefile.am              |   2 +-
 src/conf/ucm/chtrt5645/HiFi.conf      | 209 ++++++++++++++++++++++++++++++++++
 src/conf/ucm/chtrt5645/Makefile.am    |   4 +
 src/conf/ucm/chtrt5645/chtrt5645.conf |   5 +
 5 files changed, 220 insertions(+), 1 deletion(-)
 create mode 100644 src/conf/ucm/chtrt5645/HiFi.conf
 create mode 100644 src/conf/ucm/chtrt5645/Makefile.am
 create mode 100644 src/conf/ucm/chtrt5645/chtrt5645.conf
configure.ac +1 -0
index 53fca33..9eebd0a 100644
@@ -659,6 +659,7 @@ AC_OUTPUT(Makefile doc/Makefile doc/pictures/Makefile doc/doxygen.cfg \
 	  src/conf/ucm/GoogleNyan/Makefile \
 	  src/conf/ucm/broadwell-rt286/Makefile \
 	  src/conf/ucm/VEYRON-I2S/Makefile \
+	  src/conf/ucm/chtrt5645/Makefile \
 	  src/conf/topology/Makefile \
 	  src/conf/topology/broadwell/Makefile \
 	  modules/Makefile modules/mixer/Makefile modules/mixer/simple/Makefile \
src/conf/ucm/Makefile.am +1 -1
index 3cce36a..8865770 100644
@@ -1 +1 @@
-SUBDIRS=DAISY-I2S PandaBoard PandaBoardES SDP4430 tegraalc5632 PAZ00 GoogleNyan broadwell-rt286 VEYRON-I2S
+SUBDIRS=DAISY-I2S PandaBoard PandaBoardES SDP4430 tegraalc5632 PAZ00 GoogleNyan broadwell-rt286 VEYRON-I2S chtrt5645
src/conf/ucm/chtrt5645/HiFi.conf new file +209 -0

209 lines not on this page · raw message

src/conf/ucm/chtrt5645/Makefile.am new file +4 -0
new file mode 100644
index 0000000..b3a82f5
@@ -0,0 +1,4 @@
+alsaconfigdir = @ALSA_CONFIG_DIR@
+ucmdir = $(alsaconfigdir)/ucm/chtrt5645
+ucm_DATA = chtrt5645.conf HiFi.conf
+EXTRA_DIST = $(ucm_DATA)
src/conf/ucm/chtrt5645/chtrt5645.conf new file +5 -0
new file mode 100644
index 0000000..dfc36c8
@@ -0,0 +1,5 @@
+Comment "Intel SoC Audio Device"
+SectionUseCase."HiFi" {
+	File "HiFi.conf"
+	Comment "Default"
+}
Signature · 1 line
2.9.0
#1 lore raw
Quoted 5 lines · Stephen Just

Add a UCM configuration for the rt5645 codec on Intel's Cherry-Trail platform. Tested on the Microsoft Surface 3.

Could you add the bugzilla URL so that readers can follow later? I'm going to apply it once when the driver code is applied.

thanks,

Takashi