conf/ucm: chtrt5645: Add UCM config for chtrt5645
PATCH 1/1 conf/ucm: chtrt5645: Add UCM config for chtrt5645
Add a UCM configuration for the rt5645 codec on Intel's Cherry-Trail platform. Tested on the Microsoft Surface 3.
Signed-off-by Stephen Just <[email protected]>
--- configure.ac | 1 + src/conf/ucm/Makefile.am | 2 +- src/conf/ucm/chtrt5645/HiFi.conf | 209 ++++++++++++++++++++++++++++++++++ src/conf/ucm/chtrt5645/Makefile.am | 4 + src/conf/ucm/chtrt5645/chtrt5645.conf | 5 + 5 files changed, 220 insertions(+), 1 deletion(-) create mode 100644 src/conf/ucm/chtrt5645/HiFi.conf create mode 100644 src/conf/ucm/chtrt5645/Makefile.am create mode 100644 src/conf/ucm/chtrt5645/chtrt5645.conf
configure.ac +1 -0
@@ -659,6 +659,7 @@ AC_OUTPUT(Makefile doc/Makefile doc/pictures/Makefile doc/doxygen.cfg \ src/conf/ucm/GoogleNyan/Makefile \ src/conf/ucm/broadwell-rt286/Makefile \ src/conf/ucm/VEYRON-I2S/Makefile \ + src/conf/ucm/chtrt5645/Makefile \ src/conf/topology/Makefile \ src/conf/topology/broadwell/Makefile \ modules/Makefile modules/mixer/Makefile modules/mixer/simple/Makefile \
src/conf/ucm/Makefile.am +1 -1
@@ -1 +1 @@ -SUBDIRS=DAISY-I2S PandaBoard PandaBoardES SDP4430 tegraalc5632 PAZ00 GoogleNyan broadwell-rt286 VEYRON-I2S +SUBDIRS=DAISY-I2S PandaBoard PandaBoardES SDP4430 tegraalc5632 PAZ00 GoogleNyan broadwell-rt286 VEYRON-I2S chtrt5645
src/conf/ucm/chtrt5645/HiFi.conf new file +209 -0
209 lines not on this page · raw message
src/conf/ucm/chtrt5645/Makefile.am new file +4 -0
@@ -0,0 +1,4 @@ +alsaconfigdir = @ALSA_CONFIG_DIR@ +ucmdir = $(alsaconfigdir)/ucm/chtrt5645 +ucm_DATA = chtrt5645.conf HiFi.conf +EXTRA_DIST = $(ucm_DATA)
src/conf/ucm/chtrt5645/chtrt5645.conf new file +5 -0
@@ -0,0 +1,5 @@ +Comment "Intel SoC Audio Device" +SectionUseCase."HiFi" { + File "HiFi.conf" + Comment "Default" +}
Signature · 1 line
2.9.0
Quoted 5 lines · Stephen Just
Add a UCM configuration for the rt5645 codec on Intel's Cherry-Trail platform. Tested on the Microsoft Surface 3.
Signed-off-by Stephen Just <[email protected]>
Could you add the bugzilla URL so that readers can follow later? I'm going to apply it once when the driver code is applied.
thanks,
Takashi