Skip to contentSkip to conversation

2.6.19-rc1: hda_intel: azx_get_response timeout, switching to polling mode...

DISCUSSION Prakash Punnoor 2 participants 7 messages Oct 5, 2006 – Oct 6, 2006

lore
Share & tools
lore
#0 lore raw

Hi,

I didn't get above message with 2.6.18. Usign irqpoll above message doesn't appear, but I think neither it optimal.

The kernel is patched with reiser4 and acpi_skip_timer_override quirk is deactivated (see last link why).

I tried different combinations (dmesg + .config). Differences are mostly pci mt init, irqpoll, nforce eth napi, pata/ide amd driver

http://www.prakash.gmxhome.de/linux/2.6.19-rc1-1.txt.bz2
http://www.prakash.gmxhome.de/linux/2.6.19-rc1-2.txt.bz2
http://www.prakash.gmxhome.de/linux/2.6.19-rc1-3.txt.bz2
http://www.prakash.gmxhome.de/linux/2.6.19-rc1-4.txt.bz2

cat /proc/interrupts for 2.6.18 resp .19-rc1
http://www.prakash.gmxhome.de/linux/irqs18.txt
http://www.prakash.gmxhome.de/linux/irqs19.txt

lspci can be found here:
http://marc.theaimsgroup.com/?l=linux-kernel&m=115545986619977&w=2

Cheers,

Signature · 3 lines
(°=                 =°)
//\ Prakash Punnoor /\\
V_/                 \_V

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel

#1 lore raw

Am Donnerstag 05 Oktober 2006 09:54 schrieb Prakash Punnoor:

Quoted 4 lines

Hi,

I didn't get above message with 2.6.18. Usign irqpoll above message doesn't appear, but I think neither it optimal.

On another boot I get:

Advanced Linux Sound Architecture Driver Version 1.0.12rc1 (Thu Jun 22 13:55:50 2006 UTC).
ALSA device list:
No soundcards found.

Perhaps because of pci multithreaded init? But the soundcard works normally.

Cheers,

Signature · 3 lines
(°=                 =°)
//\ Prakash Punnoor /\\
V_/                 \_V

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel

#2 lore raw
In reply to Prakash Punnoor

At Thu, 5 Oct 2006 09:54:57 +0200,

Quoted 17 lines · Prakash Punnoor

Hi,

I didn't get above message with 2.6.18. Usign irqpoll above message doesn't appear, but I think neither it optimal.

The kernel is patched with reiser4 and acpi_skip_timer_override quirk is deactivated (see last link why).

I tried different combinations (dmesg + .config). Differences are mostly pci mt init, irqpoll, nforce eth napi, pata/ide amd driver

http://www.prakash.gmxhome.de/linux/2.6.19-rc1-1.txt.bz2
http://www.prakash.gmxhome.de/linux/2.6.19-rc1-2.txt.bz2
http://www.prakash.gmxhome.de/linux/2.6.19-rc1-3.txt.bz2
http://www.prakash.gmxhome.de/linux/2.6.19-rc1-4.txt.bz2

Quoted 6 lines

cat /proc/interrupts for 2.6.18 resp .19-rc1
http://www.prakash.gmxhome.de/linux/irqs18.txt
http://www.prakash.gmxhome.de/linux/irqs19.txt

lspci can be found here:
http://marc.theaimsgroup.com/?l=linux-kernel&m=115545986619977&w=2

The latest snd-hda-intel driver uses MSI as default. Pass disable_msi=1 module option and see whether it works.

BTW, the switching to polling mode is relatively harmless (that's why it's KERN_WARNING) in comparison with the single_cmd mode that the driver uses when polling mode failed too.

Takashi

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

#3 lore raw

Am Donnerstag 05 Oktober 2006 12:18 schrieb Takashi Iwai:

Quoted 7 lines

At Thu, 5 Oct 2006 09:54:57 +0200,

Quoted 2 lines · Prakash Punnoor

I didn't get above message with 2.6.18. Usign irqpoll above message doesn't appear, but I think neither it optimal.

The latest snd-hda-intel driver uses MSI as default. Pass disable_msi=1 module option and see whether it works.

Yes, no more message, but what is even better: My nforce nic works again (w/o using irqpoll)! So the alsa driver broke it. Now both are using same irq and peaceful again. (Though Alsa still reports that no soundcard was detetcted.)

CPU0 CPU1

  0:      53826          0   IO-APIC-edge     timer
  1:         66          0   IO-APIC-edge     i8042
  7:          0          0   IO-APIC-edge     parport0
  8:          0          0   IO-APIC-edge     rtc
  9:          0          0   IO-APIC-fasteoi  acpi
 12:       1650          0   IO-APIC-edge     i8042
 14:         63          0   IO-APIC-edge     ide0
 16:       2095          0   IO-APIC-fasteoi  nvidia
 19:          6          0   IO-APIC-fasteoi  ohci1394
 20:          0          0   IO-APIC-fasteoi  ohci_hcd:usb1
 21:         66          0   IO-APIC-fasteoi  ehci_hcd:usb2
 22:       5652          0   IO-APIC-fasteoi  libata
 23:       5105          0   IO-APIC-fasteoi  HDA Intel, eth0
NMI:        155         75
LOC:      53715   
Signature · 3 lines
(°=                 =°)
//\ Prakash Punnoor /\\
V_/                 \_V

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel

#4 lore raw

At Thu, 5 Oct 2006 23:11:35 +0200,

Quoted 7 lines · Prakash Punnoor

Am Donnerstag 05 Oktober 2006 12:18 schrieb Takashi Iwai:

Quoted 5 lines

At Thu, 5 Oct 2006 09:54:57 +0200,

Quoted 2 lines · Prakash Punnoor

I didn't get above message with 2.6.18. Usign irqpoll above message doesn't appear, but I think neither it optimal.

Quoted 6 lines
Quoted 2 lines

The latest snd-hda-intel driver uses MSI as default. Pass disable_msi=1 module option and see whether it works.

Yes, no more message, but what is even better: My nforce nic works again (w/o using irqpoll)! So the alsa driver broke it. Now both are using same irq and peaceful again.

It's more likely a problem of IRQ routing than the driver itself...

Quoted 1 line

(Though Alsa still reports that no soundcard was detetcted.)

It's a matter of PCI-multi probe, I guess, too. The message comes from sound/last.c, and it assumes that the probe has been called for all sound devices while it isn't the case with PCI multi probe.

Takashi

#5 lore raw

Am Freitag 06 Oktober 2006 12:58 schrieb Takashi Iwai:

Quoted 10 lines

At Thu, 5 Oct 2006 23:11:35 +0200,

Quoted 7 lines · Prakash Punnoor

Am Donnerstag 05 Oktober 2006 12:18 schrieb Takashi Iwai:

Quoted 6 lines

At Thu, 5 Oct 2006 09:54:57 +0200,

Quoted 2 lines · Prakash Punnoor

I didn't get above message with 2.6.18. Usign irqpoll above message doesn't appear, but I think neither it optimal.

Quoted 8 lines
Quoted 6 lines
Quoted 2 lines

The latest snd-hda-intel driver uses MSI as default. Pass disable_msi=1 module option and see whether it works.

Yes, no more message, but what is even better: My nforce nic works again (w/o using irqpoll)! So the alsa driver broke it. Now both are using same irq and peaceful again.

It's more likely a problem of IRQ routing than the driver itself...

Well, whom should I contact then?

Signature · 3 lines
(°=                 =°)
//\ Prakash Punnoor /\\
V_/                 \_V

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel

#6 lore raw
In reply to Takashi Iwai

Am Freitag 06 Oktober 2006 12:58 schrieb Takashi Iwai:

Quoted 10 lines

At Thu, 5 Oct 2006 23:11:35 +0200,

Quoted 7 lines · Prakash Punnoor

Am Donnerstag 05 Oktober 2006 12:18 schrieb Takashi Iwai:

Quoted 6 lines

At Thu, 5 Oct 2006 09:54:57 +0200,

Quoted 2 lines · Prakash Punnoor

I didn't get above message with 2.6.18. Usign irqpoll above message doesn't appear, but I think neither it optimal.

Quoted 8 lines
Quoted 6 lines
Quoted 2 lines

The latest snd-hda-intel driver uses MSI as default. Pass disable_msi=1 module option and see whether it works.

Yes, no more message, but what is even better: My nforce nic works again (w/o using irqpoll)! So the alsa driver broke it. Now both are using same irq and peaceful again.

It's more likely a problem of IRQ routing than the driver itself...

Well, whom should I contact then?

Signature · 3 lines
(°=                 =°)
//\ Prakash Punnoor /\\
V_/                 \_V