2.6.19-rc1: hda_intel: azx_get_response timeout, switching to polling mode...
Hi,
I didn't get above message with 2.6.18. Usign irqpoll above message doesn't appear, but I think neither it optimal.
The kernel is patched with reiser4 and acpi_skip_timer_override quirk is deactivated (see last link why).
I tried different combinations (dmesg + .config). Differences are mostly pci mt init, irqpoll, nforce eth napi, pata/ide amd driver
http://www.prakash.gmxhome.de/linux/2.6.19-rc1-1.txt.bz2
http://www.prakash.gmxhome.de/linux/2.6.19-rc1-2.txt.bz2
http://www.prakash.gmxhome.de/linux/2.6.19-rc1-3.txt.bz2
http://www.prakash.gmxhome.de/linux/2.6.19-rc1-4.txt.bz2
cat /proc/interrupts for 2.6.18 resp .19-rc1
http://www.prakash.gmxhome.de/linux/irqs18.txt
http://www.prakash.gmxhome.de/linux/irqs19.txt
lspci can be found here:
http://marc.theaimsgroup.com/?l=linux-kernel&m=115545986619977&w=2
Cheers,
Signature · 3 lines
(°= =°) //\ Prakash Punnoor /\\ V_/ \_V
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
Am Donnerstag 05 Oktober 2006 09:54 schrieb Prakash Punnoor:
Quoted 4 lines
Hi,
I didn't get above message with 2.6.18. Usign irqpoll above message doesn't appear, but I think neither it optimal.
On another boot I get:
Advanced Linux Sound Architecture Driver Version 1.0.12rc1 (Thu Jun 22 13:55:50 2006 UTC).
ALSA device list:
No soundcards found.
Perhaps because of pci multithreaded init? But the soundcard works normally.
Cheers,
Signature · 3 lines
(°= =°) //\ Prakash Punnoor /\\ V_/ \_V
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
At Thu, 5 Oct 2006 09:54:57 +0200,
Quoted 17 lines · Prakash Punnoor
Hi,
I didn't get above message with 2.6.18. Usign irqpoll above message doesn't appear, but I think neither it optimal.
The kernel is patched with reiser4 and
acpi_skip_timer_overridequirk is deactivated (see last link why).I tried different combinations (dmesg + .config). Differences are mostly pci mt init, irqpoll, nforce eth napi, pata/ide amd driver
http://www.prakash.gmxhome.de/linux/2.6.19-rc1-1.txt.bz2
http://www.prakash.gmxhome.de/linux/2.6.19-rc1-2.txt.bz2
http://www.prakash.gmxhome.de/linux/2.6.19-rc1-3.txt.bz2
http://www.prakash.gmxhome.de/linux/2.6.19-rc1-4.txt.bz2
Quoted 6 lines
cat
/proc/interruptsfor 2.6.18 resp .19-rc1
http://www.prakash.gmxhome.de/linux/irqs18.txt
http://www.prakash.gmxhome.de/linux/irqs19.txtlspci can be found here:
http://marc.theaimsgroup.com/?l=linux-kernel&m=115545986619977&w=2
The latest snd-hda-intel driver uses MSI as default. Pass disable_msi=1 module option and see whether it works.
BTW, the switching to polling mode is relatively harmless (that's why it's KERN_WARNING) in comparison with the single_cmd mode that the driver uses when polling mode failed too.
Takashi
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
Am Donnerstag 05 Oktober 2006 12:18 schrieb Takashi Iwai:
Quoted 7 lines
At Thu, 5 Oct 2006 09:54:57 +0200,
Quoted 2 lines · Prakash Punnoor
I didn't get above message with 2.6.18. Usign irqpoll above message doesn't appear, but I think neither it optimal.
The latest snd-hda-intel driver uses MSI as default. Pass disable_msi=1 module option and see whether it works.
Yes, no more message, but what is even better: My nforce nic works again (w/o using irqpoll)! So the alsa driver broke it. Now both are using same irq and peaceful again. (Though Alsa still reports that no soundcard was detetcted.)
CPU0 CPU1
0: 53826 0 IO-APIC-edge timer 1: 66 0 IO-APIC-edge i8042 7: 0 0 IO-APIC-edge parport0 8: 0 0 IO-APIC-edge rtc 9: 0 0 IO-APIC-fasteoi acpi 12: 1650 0 IO-APIC-edge i8042 14: 63 0 IO-APIC-edge ide0 16: 2095 0 IO-APIC-fasteoi nvidia 19: 6 0 IO-APIC-fasteoi ohci1394 20: 0 0 IO-APIC-fasteoi ohci_hcd:usb1 21: 66 0 IO-APIC-fasteoi ehci_hcd:usb2 22: 5652 0 IO-APIC-fasteoi libata 23: 5105 0 IO-APIC-fasteoi HDA Intel, eth0 NMI: 155 75 LOC: 53715
Signature · 3 lines
(°= =°) //\ Prakash Punnoor /\\ V_/ \_V
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
At Thu, 5 Oct 2006 23:11:35 +0200,
Quoted 7 lines · Prakash Punnoor
Am Donnerstag 05 Oktober 2006 12:18 schrieb Takashi Iwai:
Quoted 5 lines
At Thu, 5 Oct 2006 09:54:57 +0200,
Quoted 2 lines · Prakash Punnoor
I didn't get above message with 2.6.18. Usign irqpoll above message doesn't appear, but I think neither it optimal.
Quoted 6 lines
Quoted 2 lines
The latest snd-hda-intel driver uses MSI as default. Pass disable_msi=1 module option and see whether it works.
Yes, no more message, but what is even better: My nforce nic works again (w/o using irqpoll)! So the alsa driver broke it. Now both are using same irq and peaceful again.
It's more likely a problem of IRQ routing than the driver itself...
Quoted 1 line
(Though Alsa still reports that no soundcard was detetcted.)
It's a matter of PCI-multi probe, I guess, too. The message comes from sound/last.c, and it assumes that the probe has been called for all sound devices while it isn't the case with PCI multi probe.
Takashi
Am Freitag 06 Oktober 2006 12:58 schrieb Takashi Iwai:
Quoted 10 lines
At Thu, 5 Oct 2006 23:11:35 +0200,
Quoted 7 lines · Prakash Punnoor
Am Donnerstag 05 Oktober 2006 12:18 schrieb Takashi Iwai:
Quoted 6 lines
At Thu, 5 Oct 2006 09:54:57 +0200,
Quoted 2 lines · Prakash Punnoor
I didn't get above message with 2.6.18. Usign irqpoll above message doesn't appear, but I think neither it optimal.
Quoted 8 lines
Quoted 6 lines
Quoted 2 lines
The latest snd-hda-intel driver uses MSI as default. Pass disable_msi=1 module option and see whether it works.
Yes, no more message, but what is even better: My nforce nic works again (w/o using irqpoll)! So the alsa driver broke it. Now both are using same irq and peaceful again.
It's more likely a problem of IRQ routing than the driver itself...
Well, whom should I contact then?
Signature · 3 lines
(°= =°) //\ Prakash Punnoor /\\ V_/ \_V
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
Am Freitag 06 Oktober 2006 12:58 schrieb Takashi Iwai:
Quoted 10 lines
At Thu, 5 Oct 2006 23:11:35 +0200,
Quoted 7 lines · Prakash Punnoor
Am Donnerstag 05 Oktober 2006 12:18 schrieb Takashi Iwai:
Quoted 6 lines
At Thu, 5 Oct 2006 09:54:57 +0200,
Quoted 2 lines · Prakash Punnoor
I didn't get above message with 2.6.18. Usign irqpoll above message doesn't appear, but I think neither it optimal.
Quoted 8 lines
Quoted 6 lines
Quoted 2 lines
The latest snd-hda-intel driver uses MSI as default. Pass disable_msi=1 module option and see whether it works.
Yes, no more message, but what is even better: My nforce nic works again (w/o using irqpoll)! So the alsa driver broke it. Now both are using same irq and peaceful again.
It's more likely a problem of IRQ routing than the driver itself...
Well, whom should I contact then?
Signature · 3 lines
(°= =°) //\ Prakash Punnoor /\\ V_/ \_V