audiophile not working
Hi,
I just installed linux (Suse 7.3 package) and upgraded to alsa 0.9beta11 in order to run some of my own code.
The hardware is recognized:
# cat /proc/asound/card0/ice1712 ICE1712
EEPROM:
Subvendor : 0x121434d6 Size : 29 bytes Version : 1 Codec : 0x10 ACLink : 0x80 I2S ID : 0x72 S/PDIF : 0x3 GPIO mask : 0x4 GPIO state : 0xfe GPIO direction : 0xfb AC'97 main : 0x0 AC'97 pcm : 0x0 AC'97 record : 0x0 AC'97 record src : 0x44 DAC ID #0 : 0x4 DAC ID #1 : 0x0 DAC ID #2 : 0x0 DAC ID #3 : 0x0 ADC ID #0 : 0x4 ADC ID #1 : 0x0 ADC ID #2 : 0x0 ADC ID #3 : 0x0 Extra #28 : 0x1
However there does not seem to be a proper sequencer - modprobing the snd-ice1712 does not load sequencer modules as I would normally expect, and if I load them manually, there still is no "hw" sequencer to use
# amixer ALSA lib control.c:601:(snd_ctl_open_noupdate) Invalid CTL default amixer: Mixer attach default error: No such file or directory # pmidi -l Could not open sequencer No such file or directory ALSA lib control.c:601:(snd_ctl_open_noupdate) Invalid CTL hw:0 # alsactl store /tmp/alsactl: get_controls:432: snd_ctl_open error: No such file or directory
I hope anyone can shed some light on that
Regards
Wolfgang Hamann
_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
Quoted 47 lines · Wolfgang Hamann
Hi,
I just installed linux (Suse 7.3 package) and upgraded to alsa 0.9beta11 in order to run some of my own code.
The hardware is recognized:# cat /proc/asound/card0/ice1712 ICE1712EEPROM:
Subvendor : 0x121434d6 Size : 29 bytes Version : 1 Codec : 0x10 ACLink : 0x80 I2S ID : 0x72 S/PDIF : 0x3 GPIO mask : 0x4 GPIO state : 0xfe GPIO direction : 0xfb AC'97 main : 0x0 AC'97 pcm : 0x0 AC'97 record : 0x0 AC'97 record src : 0x44 DAC ID #0 : 0x4 DAC ID #1 : 0x0 DAC ID #2 : 0x0 DAC ID #3 : 0x0 ADC ID #0 : 0x4 ADC ID #1 : 0x0 ADC ID #2 : 0x0 ADC ID #3 : 0x0 Extra #28 : 0x1However there does not seem to be a proper sequencer - modprobing the snd-ice1712 does not load sequencer modules as I would normally expect, and if I load them manually, there still is no "hw" sequencer to use
# amixer ALSA lib control.c:601:(snd_ctl_open_noupdate) Invalid CTL default amixer: Mixer attach default error: No such file or directory # pmidi -l Could not open sequencer No such file or directory ALSA lib control.c:601:(snd_ctl_open_noupdate) Invalid CTL hw:0 # alsactl store /tmp/alsactl: get_controls:432: snd_ctl_open error: No such file or directory
Quoted 1 line
I hope anyone can shed some light on that
It looks like that /dev/snd/* devices are not accessible. Try 'snddevices' script in alsa-driver.
Jaroslav
-----
Jaroslav Kysela <[email protected]>
Linux Kernel Sound Maintainer
ALSA Project http://www.alsa-project.org
SuSE Linux http://www.suse.com
_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel