Skip to contentSkip to conversation

audiophile not working

DISCUSSION Wolfgang Hamann 2 participants 2 messages Mar 4, 2002

lore
Share & tools
lore
#0 lore raw

Hi,

I just installed linux (Suse 7.3 package) and upgraded to alsa 0.9beta11 in order to run some of my own code.
The hardware is recognized:

# cat /proc/asound/card0/ice1712
ICE1712

EEPROM:

  Subvendor        : 0x121434d6
  Size             : 29 bytes
  Version          : 1
  Codec            : 0x10
  ACLink           : 0x80
  I2S ID           : 0x72
  S/PDIF           : 0x3
  GPIO mask        : 0x4
  GPIO state       : 0xfe
  GPIO direction   : 0xfb
  AC'97 main       : 0x0
  AC'97 pcm        : 0x0
  AC'97 record     : 0x0
  AC'97 record src : 0x44
  DAC ID #0        : 0x4
  DAC ID #1        : 0x0
  DAC ID #2        : 0x0
  DAC ID #3        : 0x0
  ADC ID #0        : 0x4
  ADC ID #1        : 0x0
  ADC ID #2        : 0x0
  ADC ID #3        : 0x0
  Extra #28        : 0x1

However there does not seem to be a proper sequencer - modprobing the snd-ice1712 does not load sequencer modules as I would normally expect, and if I load them manually, there still is no "hw" sequencer to use

# amixer
ALSA lib control.c:601:(snd_ctl_open_noupdate) Invalid CTL default
amixer: Mixer attach default error: No such file or directory
# pmidi -l
Could not open sequencer No such file or directory
ALSA lib control.c:601:(snd_ctl_open_noupdate) Invalid CTL hw:0
# alsactl store
/tmp/alsactl: get_controls:432: snd_ctl_open error: No such file or directory

I hope anyone can shed some light on that

Regards
Wolfgang Hamann

_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel

#1 lore raw
Quoted 47 lines · Wolfgang Hamann

Hi,

I just installed linux (Suse 7.3 package) and upgraded to alsa 0.9beta11 in order to run some of my own code.
The hardware is recognized:

# cat /proc/asound/card0/ice1712
ICE1712

EEPROM:

  Subvendor        : 0x121434d6
  Size             : 29 bytes
  Version          : 1
  Codec            : 0x10
  ACLink           : 0x80
  I2S ID           : 0x72
  S/PDIF           : 0x3
  GPIO mask        : 0x4
  GPIO state       : 0xfe
  GPIO direction   : 0xfb
  AC'97 main       : 0x0
  AC'97 pcm        : 0x0
  AC'97 record     : 0x0
  AC'97 record src : 0x44
  DAC ID #0        : 0x4
  DAC ID #1        : 0x0
  DAC ID #2        : 0x0
  DAC ID #3        : 0x0
  ADC ID #0        : 0x4
  ADC ID #1        : 0x0
  ADC ID #2        : 0x0
  ADC ID #3        : 0x0
  Extra #28        : 0x1

However there does not seem to be a proper sequencer - modprobing the snd-ice1712 does not load sequencer modules as I would normally expect, and if I load them manually, there still is no "hw" sequencer to use

# amixer
ALSA lib control.c:601:(snd_ctl_open_noupdate) Invalid CTL default
amixer: Mixer attach default error: No such file or directory
# pmidi -l
Could not open sequencer No such file or directory
ALSA lib control.c:601:(snd_ctl_open_noupdate) Invalid CTL hw:0
# alsactl store
/tmp/alsactl: get_controls:432: snd_ctl_open error: No such file or directory
Quoted 1 line

I hope anyone can shed some light on that

It looks like that /dev/snd/* devices are not accessible. Try 'snddevices' script in alsa-driver.

Jaroslav

-----
Jaroslav Kysela <[email protected]>
Linux Kernel Sound Maintainer
ALSA Project http://www.alsa-project.org
SuSE Linux http://www.suse.com

_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel