libata: Signal that our SATL supports WRITE SAME(16) with UNMAP
PATCH 1/1 libata: Signal that our SATL supports WRITE SAME(16) with UNMAP
Until now identifying that a device supports WRITE SAME(16) with the UNMAP bit set has been black magic. Implement support for the SBC-3 Thin Provisioning VPD page and set the TPWS bit.
Signed-off-by Martin K. Petersen <[email protected]>
---
drivers/ata/libata-scsi.c +14 -0
@@ -2001,6 +2001,7 @@ static unsigned int ata_scsiop_inq_00(struct ata_scsi_args *args, u8 *rbuf)0x89 ,/* page 0x89, ata info page */ 0xb0 ,/* page 0xb0, block limits page */ 0xb1 ,/* page 0xb1, block device characteristics page */ +0xb2 ,/* page 0xb2, thin provisioning page */ }; rbuf[3 ] =sizeof (pages);/* number of supported VPD pages */
@@ -2172,6 +2173,16 @@ static unsigned int ata_scsiop_inq_b1(struct ata_scsi_args *args, u8 *rbuf)return 0 ; } +static unsigned int ata_scsiop_inq_b2 (struct ata_scsi_args *args,u8 *rbuf) +{ +/* SCSI Thin Provisioning VPD page: SBC-3 rev 22 or later */ + rbuf[1 ] =0xb2 ; + rbuf[3 ] =0x4 ; + rbuf[5 ] =1 <<6 ;/* TPWS */ + +return 0 ; +} +/** * ata_scsiop_noop - Command handler that simply returns success. * @args: device IDENTIFY data / SCSI command of interest.
@@ -3250,6 +3261,9 @@ void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd,case 0xb1 :ata_scsi_rbuf_fill (&args, ata_scsiop_inq_b1);break ; +case 0xb2 : +ata_scsi_rbuf_fill (&args, ata_scsiop_inq_b2); +break ;default :ata_scsi_invalid_field (cmd, done);break ;
Jeff Garzik
AppliedQuoted 6 lines · Martin K. Petersen
Until now identifying that a device supports WRITE SAME(16) with the UNMAP bit set has been black magic. Implement support for the SBC-3 Thin Provisioning VPD page and set the TPWS bit.
Signed-off-by Martin K. Petersen<[email protected]>
applied